Construction of Boundary Wall at PMM Cemetary Committee surrounding Public Graveyard, Mouza-Mozampur, plot No- 812, JL No. 169 under Kaliachak-l Dev Block, Malda.

Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge.

Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-In 6:3:1 proportion.charge, complete. In 6:3:1 proportion.

Ordinary Cement Concrete ( Mix 3:1.5:1) M-20 with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any, in Ground floor as per IS 456-2000. Using Stone material of Rajmahal variety.

Ordinary Cement Concrete ( Mix 3:1.5:1) M-20 with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any, in Ground floor as per IS 456-2000. Using Stone material of Rajmahal variety.

Brick work with 1st class bricks in cement mortor (4:1) foudation & plinth

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works.a ) 25 mm to 30 mm shuttering without staging /Foundation

b) 25mm to 30mm thick wooden shuttering as per decision & Direction of E.I.C

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrup, binders etc. Including supply of rods initial straightening and removal of loose rust(if necessary} cutting to requsite legnth, hooking and bending to correct shape,placing im proper position and binding with 16 gauge black annealedwire at every inter section,complete as per drawing and direction.Tor/Mild steel. Engineer in-charge(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)

Earth work in filling in foundation trenches or plinth with good earth in layers not 150 mm including watering and ramming etc layer by layer complete (a) with earth obtaine from excavation of foundation

125mm thick Brick work with 1st Class Brick in cement Motar

25mm thick Damp proof course with Cement Concrete (1:1.5:3) with graded stone aggreagates 10mm nominal size) and

M.S. or W. I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows, railing etc fitted & fixed with necessary screws and lugs in G.F. Grill weighing above 10 kg to 16 kg./ Sqm

Plaster ( to wall, floor,ceiling etc. ) with sand cement mortar including Rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including threading nosing and drip Course where necessary.

Priming one coat on timber, plastered or on steel or other metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surfaces by sand papering etc.On Steel Surface

Painting with best quality Synthetic Enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc on the surface if necessaryOn timber or plastered surface with Super Gloss (Hi-gloss), Two coats (with any shade except white)On timber or plastered surface with Super Gloss (Hi-gloss), Two coats (with any shade except white)

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. In ground floor. Two Coats

Earth work filling in compound , tank. Low land, ditches etc with good earth, in layers not exceeding 150mm . Including breaking clods and consolidating the same by ramming and dressing complete(a) with carried earth arranged by the contractor within a radious of 3 KM. including cost of carried earth

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.)

Sub Total