Karnataka

AOC

Works

Buildings

Construction of PI mess for JCOs and OR accomodation in 4 Karnataka battalion NCC at Tumkur (K&G)

Public Works Department

PWD Division Office Tumkuru | Tumkur, Karnataka

Amount: Refer DocsCloses: 21 May 2026Closed

Timeline

Published7 May 2026
Closed21 May 2026
Awarded—

Bids

1 Bid21 May 2026

#	Company	Amount	Status
1	V R RAMAKRISHNAPPA ₹69.3 Laccepted-aoc	₹69.3 L	accepted-aoc

Tender Value

Refer Docs

EMD Value

₹1.3 L

Closing Date

21 May 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

G Raju

Office Number

Work Description

Construction of PI mess for JCOs and OR accomodation in 4 Karnataka battalion NCC at Tumkur (K&G)

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT35737

Reference Number

PWD/2026-27/BD/WORK_INDENT35737

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Tumkuru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredKPWD Registration Certificate

RequiredBid Capacity as per Bid Document

RequiredLine of Credit

RequiredWork done ceritificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The cost of the Tender form shall not be refundable

The employer is not responsible for any delay in accessing KPP Portal.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-3 K.P.W.D. and further orders thereon

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1%of the bill amount will be deducted towards constructions labor welfare fund.

As per Government circular no: FD 355 EXP 12/2024 dtd 01.08.2024, Letter of Intent (LoI)will be issued in Karnataka Public Procurement Portal 2.0 software, contractor has to accept LOI online and submit the BG s through KPP portal within 20 days. if not tender will be rejected as per Guidelines

The difference amount and the percent security deposit submitted by the contractor for the project will be released upon completion of the defect liability period and receipt of the final bill

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents Contractors Should be registered with KPWD as Class-III Contractor and further orders thereon.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and complete the work at the accepted tender rates irrespective of the cost of the work

The successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given Clause 25.1 of ITT for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause44 of the Conditions of Contract

Contractor should take all precautions to ensure that no damage is caused to any adjacent structures/utilities above or below the ground and also to the existing canal CD works and other similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost. Damage to physical property and personal injury and death will be the personal risk of the contractor

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost.

Contractor should execute the project with least impact to the environment till the completion of project.

All materials required for the work like steel, cement etc., shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.6 of standard tender document Attached. For calculation of tender capacity A and B values must be furnished work wise duly signed by the authorized signatory

All the items in the tender including all lead, lifts,loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convence of all material and all other such incidental charges necessary for successful completion of works as per the detalied technical specification and direction of Engineer-in-charge of this work

When embankments are constructed disputes arising on account of damages to the existing field channels, bunds and other private properties, if any, has to be resolved by the contractor. All precautions should be taken by the contractor so that there are no damages to such public/ private properties.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the privaling rules of labour act & The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval. All the originals of uploaded documents in KPP portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection. No separate communication will be made in this regard, failing which action will be taken as per tender conditions and registration rules

As per the Government Circular No.PWD:ITC:2008/2009, Dated.2-12-2010, the tendered contractors, should submit the Original Bank Guarantee issued by the Bankers for the said work at the time of opening of the Technical Bids.

Minimum Fifty Thousand Rupees of the specified EMD should be paid in any one of the forms mentioned in Clause 9.1, Bank Guarantee must be given for the remaining amount in prescribed format. The copy of the Bank Guarantee must be scanned and submitted along with the Technical bid. The original should be produced during opening of Technical bid

The successful tenderer should provide monthly physical and financial progress to be achieved in Bar chart/Milestone chart/PERT chart during agreement.

The returns submitted to the I.T. along with the Profit and Loss account statement should be uploaded for the financial turnover criteria attested by Chartered Accountant. The Turnover certificate should be obtained from the Chartered Accountant having UDIN number, if failed to satisfy the condition the tender will be Rejected.

Contractors Should be registered with KPWD as Class-III Contractor.

The tenderer should maintain the Building works during the defective liability period for 1 years.

AS PER THE GOVT ORDER NO: FD417EXP-12/2024 DATED 09-08-2024 GST WILL BE PAID SEPARATELY

Bidder Should Submit the Original bank Gaurantee of EMD on before the last date and time notified in the tender document to the Office of Excecutive Engineer PWD Division Tumkur.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

3.2 c. executed in any one year, the following minimum 80% quantities of work:1) PCC/RCC in Cum-18.00 2)Plastering/Ceiling Plastering in Cum-128.00, 3)Steel in Tonnes -1.54 4)EWE/Subgrade/embankment in Cum-542.00 5)Daddoing/skirting/Flooring in Cum-68.00, 6)Painting in Cum-87.00 7)SSM/BBM in Cum-87.50

Work Done Certificate

3.2 b. To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 satisfactorily completed(Atleast 90% of the Contract Value) as a prime contractor for at least one similar Road work to an extent of 50% of the cost of the work, such as Building work of value not less than Rs. 33.47 Lakhs (Past experience) Certified duly by the 0fficer not below the rank of Executive Engineer

Work Done Certificate

Capabilities of Vendor

3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity (A X N X 2.5 - B)where A-Maximum value of civil engineering works executed in any one year during the last five years(updated to 2026-27 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B- Value, at 2026-27 price level,of existing commitments and on-going works to be completed during the next 6 months (period of completion of the works for which Tenders are invited)

Others -- Bid capacity as per bid document.

Financial Status

liquid assets and /or availability of credit facilities of not less than Rs 20.08 Lakhs Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks banks not less than 3 (Three months ) months old from the date of Tendering for meeting the fund requirement etc (Unconditional Line of Credit)

Line of Credit

3.1All Tenderers shall provide the requested information accurately and in sufficient detail in Section 3 Qualification information. 1.To qualify for award of this contract,each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 achieved in at least Two financial year a minimum financial turnover(in all classes of civil engineering construction works only) of Rs.66.95Lakhs Financial Status and Attach the last five years profit & loss statement certificate countersigned from a chartered accountant (Certificate from CA with UDIN Number,if Failed to satisfy the condition tender will be rejected)

Audited CA Certificate of Annual Turnover

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,680

EMD Fee Amount

₹1.3 L

Important Dates

Last Activity

21 May 2026

Published

7 May 2026

Bid Opening

22 May 2026

Download Ends

20 May 2026

Pre-Bid Meeting

8 May 2026

BOQ Preview

•

Construction of PI mess for JCOs and OR accomodation in 4 Karnataka battalion NCC at Tumkur (K&G)

•

Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- Item including cost and conveyance of all materials lead and lift charges loa...

•

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification

•

I.S. 3620/1979 having compresSive strength not le...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all m...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remo...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, fac...

•

Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), c...

•

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide...

•

Providing and fixing double glazed hermetically sealed glazing in alu- minium windows, ventilators and partition etc. with 6 mm thick clear float Glass both side, having 12 mm air gap, includi...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing & fixing fly proof wire gauze to windows, clerestory windows

•

& doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised

•

M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Finishing External walls with Granitic finish with architect recommended shade on prepared Masonry surfaces. Two coats of Granitic finish @ 2.7 kg/10m2 of reputed make applied over priming coat @ 2.20...

•

Painting with oil type wood preservative of approved brand and manu- facture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and ...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm ---- Item including cost and conveyance of all materials lead a...

•

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges a...

•

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore ---- Item including cost and conveyance of all materials lead and lift charges loading and unloading charges labor charges ...

•

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat o...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

•

Providing and fixing Double Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - class - Economy ---- Item including cost and c...

•

Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper jo...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern w...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS : 2556 (P.No.A44 Vol 2 Sl No. 1054 of CSR 2023-24) ---- Item including c...

•

Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with enamel ...

•

Providing and fixing Health Faucet (Jaquat florentine) make including with all lead and lift including cost and conveyance of all materials, labour hire charges of all machineries and equipments and a...

•

CURTAINS: Providing and stitching of full height curtains from polysters JQUARD CLOTH curtins of basic with polyster lining stitching with polysters lining cloth and stiffener tape complete with neces...

•

CURTAIN RODS: Providing and fixing double line curtain rods with 25mm dia. Stainless steel of heavy gauge pipe with stainless steel end brackets and stainless steel supporting double brackets and I-ba...

•

Construction of sump with motor, Rain water harvesting, RO Plant

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing Brick work with common burnt clay modular bricks of clasS designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement

•

: 6 coarse sand) including cost of all material...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...

•

Additionalities for formwork,centrening,scaffolding charges shall be added on percentage to the finished concrete for Well Foundation ---- Item including cost and conveyance of all materials lead and ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

35737 KW 3.doc

Tender Document • 1.76 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

V R RAMAKRISHNAPPA

₹69.3 Laccepted-aoc