Renovation of Essential staff accommodation Type III and IV quarters both Civil and Electrical works in TTRS, Thirusulam Chennai 600 043.

Amount

Part - A (Type III - Civil)

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within CSIR-TTRS Campus etc., complete all as per direction of Engineer-in-Charge. (Internal Work- Exposed on wall)

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within CSIR-TTRS Campus etc., complete all as per direction of Engineer-in-Charge. (150 mm dia pipe)

Dismantling 15 to 110 mm dia PVC pipe lines including stacking of dismantled pipes within CSIR-TTRS Campus etc.,complete all as per direction of Engineer -in-charge. concealed/exposed on wall

Dismantling of W.C pan for all sizes including disposal of dismantilled materials i/c malba within CSIR-TTRS Campus etc., complete all as per direction of Engineer-incharge.

Dismantling tile work in floors and Wall laid in cement mortar including stacking material for thickness of tiles 10 mm to 25 mm within CSIR-TTRS Campus etc., complete all as per direction of Engineer-incharge.

Providing and fixing Ist quality ceramic glazed wall tiles size 300x600 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade etc., complete all as per direction of Engineer-in-charge (Make - Johnson, Somany, Kajaria or equivalent)

Providing and laying Vitrified floor tiles Size of 600x600 mm in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc., complete all as per direction of Engineer-incharge. (Make-Johnson, Somany, Kajaria or equivalent)

Providing and fixing 1st quality ceramic antiskid floor tiles osf size 300 x 300 mm, conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Make-Johnson, kajaria or equivalent)

Wall painting with premium acrylic emulsion paint of interior grade , having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and coloure:(The rate is inclusive of necessary scrapping and putty wherever is required). Two or more coats on old work as per direction of Engineer-incharge (Make- Asian, Berger or equivalent)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade.Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface (The rate is inclusive of necessary touch up Exterior wall care putty and scrapping wherever is required as per direction of Engineer-incharge (Make- Asian, Berger or equivalent)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gm/litre of approved brand and manufacturer including applying additional coats wherever required to achieve to even shade and colour Old work (one or more coats) :(The rate is inclusive of necessary scrapping and putty wherever is required) etc., complete all as per direction of Engineer-incharge (Make- Asian, Berger or equivalent)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on old work as per direction of Engineer-incharge (Make - Asian, Berger or equivalent)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. (Make-parryware or equivalent)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (Metro or equivalent make)

Providing and fixing CP brass sink cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore (Metro or equivalent make)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm

Providing and fixing CP brass pillar cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore metro delux or equivalent (Metro or equivalent make)

Providing and fixing Stainless steel Hand shower (Health faucet) with 8mm dia, 1.2 m long flexible tube & wall hook of product hook as directed by Engineer-in-charge, cutting and making good the walls. (Metro or equivalent make)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore (Metro or equivalent make)

Providing and fixing two way bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal borewith wall flange as directed by Engineer-in-charge, cutting and making good the walls. (Metro or equivalent make)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (Metro or equivalent make)

Providing and fixing approved colour / shade of waste connection hose as directed by Engineer- in-charge, cutting andd making good the walls

Providing and fixing approved colour/shade of connection hose hot & Cold water as directed by Engineer-in-charge, cutting and making good the walls.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour and making good the walls.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.

Constructing masonry Chamber 75x75x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (Metro or equivalent make) a) 15 mm nominal dia

Providing and fixing C.P. brass shower rod with 15 or 20 mm inlet : (Metro or equivalent make) 150 mm diameter

Providing and fixing C.P. brass shower dome with 15 or 20 mm inlet : (Metro or equivalent make) 200 mm diameter

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (Metro or equivalent make)

25 mm nominal bore

50 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Make-Ashirvaad or equivalent )

25 mm nominal outer dia Pipes

40 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

Providing and fixing Polyvinyl Chloride (PVC) pipes, having thermal stability for hot & cold water supply, including all PVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work/ Exposed on wall, including cutting chases and making good the walls etc. (Make-Finolex, Ashirvaad or equivalent )

50 mm pvc pipe

75 mm pvc pipe

110 mm pvc pipe

160 mm pvc pipe

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Lakshmi red, Elite Brown, Cat Eye or equivalent.

Part - B (Type-III -Electrical )

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group B)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire)

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (20 mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and fixing single pole blanking plate in the existing MOB DB complete etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 14 way, Double door SPN MCBDB

Supply, installation, testing and commissioning of 1200mm/48"ceiling fan similar to High Speed riviera Model of Crompton Greaves or New Breeze model of Orient make or Equivalent as approved by department including wiring the standard down rod, and providing Socket type electronic step regulator in the existing switch board and making all necessary connection with cables/wires of adequate ratings etc, complete with all accessories as required.

Supply of 4 Ft LED T8 tube light 20 W similar to Philips Essential LED tube model No: HO 1200mm 20W 765 T8 AP I G 2100 Lumens or equivalent and philips Tarang Tube light patti model or Equivalent as approved by department.

Removing of existing wirings, DB's and old switches and handing over the same to the Engineer-In-Charge as required.(Type - III- 6 Nos of quarters)

Part - C (Type IV - Civil)

Dismantling 15 to 110 mm dia G.I pipe lines including stacking of dismantled pipes with in CSIR-TTRS campus etc., complete all as per direction of Engineer -in-charge. concealed/exposed on wall

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material with in CSIR-TTRS campus etc., complete all as per direction of Engineer-in-Charg -150 mm dia pipe

Dismantling 15 to 110 mm dia PVC pipe lines including stacking of dismantled pipes with in CSIR-TTRS campus etc., complete all as per direction of Engineer -in-charge concealed/exposed on wall

Dismantling of W.C pan for all sizes including disposal of dismantilled materials i/c malba with in CSIR-TTRS campus etc., complete all complete as per direction of Engineer-incharge

Dismantling tile work in floors and Wall laid in cement mortar for thickness of tiles 10 mm to 25 mm including stacking material with in CSIR-TTRS campus etc., complete all as per direction of Engineer-incharge

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :12 mm thick plain grade -1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT- I, IS : 3087 marked, bonded with BWP type synthetic resin adhesive as per IS : 848 :

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (copper oxidised as per IS:1378) : 125 mm

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : copper oxidized as per IS: 1378 : 250x10 mm

Providing and fixing Ist quality ceramic glazed wall tiles size 300x600 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete etc., complete all as per direction of Engineer-incharge (Make - Johnson, Somany, Kajaria or equivalent)

Providing and laying Vitrified floor tiles of size 600x600 mm in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc., complete all as per direction of Engineer-incharge (Make - Johnson, Somany, Kajaria or equivalent)

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Make-Johnson, kajaria or equivalent)

Wall painting with premium acrylic emulsion paint of interior grade , having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and coloure:(The rate is inclusive of necessary scrapping and putty wherever is required). Two or more coats on old work as per direction of Engineer-incharge (Make- Asian, Berger or equivalent)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gm/litre of approved brand and manufacturer including applying additional coats wherever required to achieve to even shade and colour Old work (one or more coats) :(The rate is inclusive of necessary scrapping and putty wherever is required). as per direction of Engineer-incharge (Make- Asian, Berger or equivalent)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade.Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface (The rate is inclusive of necessary touch up Exterior wall care putty and scrapping wherever is required as per direction of Engineer-incharge (Make- Asian, Berger or equivalent)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on old work as per direction of Engineer-incharge (Make - Asian, Berger or equivalent)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Lakshmi red, Elite Brown, Cat Eye or equivalent.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Make-parryware or equivalent)

roviding and fixing approved colour/shade of vitreous china pedestal type water closet (Indian type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests ( parryware or equivalent)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (Make- Metro or equivalent)

Providing and fixing CP brass sink cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore (Make- Metro or equivalent)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm

Providing and fixing CP brass pillar cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore metro delux or equivalent (metro or equivalent)

Providing and fixing Stainless steel Hand shower (Health faucet) with 8mm dia, 1.2 m long flexible tube & wall hook of product hook as directed by Engineer-in-charge, cutting and making good the walls. (Make- Metro or equivalent)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore (Metro or equivalent make)

Providing and fixing two way bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal borewith wall flange as directed by Engineer-in-charge, cutting and making good the walls. (Make- Metro or equivalent)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (Make- Metro or equivalent)

Providing and fixing approved colour / shade of waste connection hose as directed by Engineer- in-charge, cutting andd making good the walls

Providing and fixing approved colour/shade of connection hose hot & Cold water as directed by Engineer-in-charge, cutting and making good the walls.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour and making good the walls.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Constructing masonry Chamber 75x75x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (Make- Metro or equivalent) a) 15 mm nominal dia

Providing and fixing C.P. brass shower rod with 15 or 20 mm inlet : (Make- Metro or equivalent)150 mm diameter

Providing and fixing C.P. brass shower dome with 15 or 20 mm inlet : (Make- Metro or equivalent) 200 mm diameter

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (Make- Metro or equivalent)

25 mm nominal bore

50 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Make-Ashirvaad or equivalent )

25 mm nominal outer dia Pipes

50 mm nominal outer dia Pipes

Providing and fixing Polyvinyl Chloride (PVC) pipes, having thermal stability for hot & cold water supply, including all PVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work/ Exposed on wall, including cutting chases and making good the walls etc. (Make-Finolex, Ashirvaad or equivalent )

50 mm pvc pipe

75 mm pvc pipe

110 mm pvc pipe

160 mm pvc pipe

Part - D (Type-IV -Electrical )

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Group B)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire)

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (20 mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and fixing single pole blanking plate in the existing MOB DB complete etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc.as required. For 14 way, Double door SPN MCBDB

Supply, installation, testing and commissioning of 1200mm/48"ceiling fan similar to High Speed riviera Model of Crompton Greaves or New Breeze model of Orient make or Equivalent as approved by department including wiring the standard down rod, and providing Socket type electronic step regulator in the existing switch board and making all necessary connection with cables/wires of adequate ratings etc, complete with all accessories as required.

Supply of 4 Ft LED T8 tube light 20 W similar to Philips Essential LED tube model No: HO 1200mm 20W 765 T8 AP I G 2100 Lumens or equivalent and philips Tarang Tube light patti model or Equivalent as approved by department.

Removing of existing wirings, DB's and old switches and handing over the same to the Engineer-In-Charge as required.(Type-IV - 3 Nos of quarters)

M/s. Selvalaskhmi Constructions (BID ID -815994)