Provision of Flooring at First Floor of Terminal Building and City side Canopies at B.M. Airport, Ranchi.

Amount

Note: The tender rate should be inclusive of all taxes, duties, cess, fee , royalty charges etc. levied under any statute but exclusive of GST.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Taking out existing CC interlocking paver blocks from footpath/ centralverge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position cement concrete of specified grad excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing & Laying full body matt plain tiles ( AGL,Johnson or approved equivalent ) in floor of minimum thichkness 15 mm with water absorption less than 0.06% and conforming to IS: 15622 of approved make, brand and manufacturer laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.30 kg/sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thichkness, vaccum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily,all complete as per the direction and satisfaction of Engineer-in -charge. Size of tile 600 X 600 mm all colours and shades.

Providing & Laying full body plain / matt tiles( AGL, Johnson or approved equivalent ) in floor of minimum thichkness 15 mm with water absorption less than 0.06% and conforming to IS: 15622 of approved make, brand and manufacturer laid on 15 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.30 kg/sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thichkness, vaccum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily, all complete as per the direction and satisfaction of Engineer-in -charge. Size of tile 800 X 2400 mm all colours and shades.

Providing & Laying full body matt vitrified tile ( AGL, Johnson or approved equivalent ) in different sizes of minimum thichkness 7.5 mm with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based)conforming to IS: 15477, in average 6 mm thickness, including grouting of joints, all complete as per the direction and satisfaction of Engineer-in -charge. Size of Tile 600x600 mm.

S S Enterprises (BID ID -846611)

Delkeen Solutions LLP (BID ID -846737)

M/S DAROGA SINGH CONSTRUCTION COMPANY (BID ID -846918)

M/s. A S Traders (BID ID -844623)