STP cum FSTP - Dharmapuri Zone

Design, Engineering, and Technical Vetting of a combined STP and FSTP system. Scope includes: Site Survey and Soil Testing; Process and Hydraulic Design (PFD/HFD); Detailed Civil, Structural, and Electromechanical Drawings; Third-Party Technical Vetting from a Government Institute (IIT/NIT/Anna University);

Construction, Supply, Erection and Commissioning of Inlet chamber & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units and all connected works etc.complete.

Construction, Supply, Erection and Commissioning of Manual Screen Chambers with R.C.C Screen channels including manual medium Coarse and Fine screen civil & mechanical. monitoring, control and data acquisition on quality and quantity and their mechanical standby units all connected works etc. complete

Construction, Supply, Erection and Commissioning of Equalization Tank with coarse bubble diffusers, air supply pipes from Blowers to basin header,air supply dropper submerged in tank, submersible pumps, lifting arrangements for pumps including all mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete as per specification.

Construction, Supply, Erection and Commissioning of Secondary Clarifier including clarifier mechanism, guide channel, spindle, shaft, Sludge handling pumps (Re circulation pump) to transfer the sludge to sludge holding tank and to Aeration tank with all accessories etc. complete, with all connected civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete.

Construction, Supply, Erection and Commissioning of Sludge Holding Tank including all connected civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete.

Construction, Supply, Erection and Commissioning of Filter Feed Tank with Filter Feed pumps to transfer the sewage to Multi grade filters with all accessories etc. complete, all connected civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete.

Construction, Supply, Erection and Commissioning of Disinfection Tank complete, all connected civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete.

Supply, Erection and Commissioning of Air blowers suitable to deliver dry oil free air to the Aeration tank and Equalisation tanks, with required air flow pipes, air flow meter, pressure gauges, valves, Air Blowers with accessories, electro mechanical & instrumentation accessories etc.,complete as per specification

Supply, Erection and Commissioning of Multi-Grade Sand Filter (MGF) to remove suspended solids and turbidity. Includes a high-strength pressure vessel (FRP or MS), graded layers of filter media (sand, pebbles, and gravel), and a frontal pipe assembly with valves for easy backwash and rinsing. Comes complete with pressure gauges and internal distribution systems for efficient water filtration.

Supply, Erection and commissioning of Online Chlorine Dosing Pump (HYPO) with dosing Tank including all necessary arrangements., as per specification etc., complete

Supply, Erection and commissioning of Online Polymer Dosing Pump (POLY) with dosing Tank including all necessary arrangements., as per specification etc., complete

Supply, Erection and commissioning of Filter Press Mechanism including Screw pumps and all necessary arrangements., as per specification etc., complete

Supply, Erection and commissioning of Motor Control Center (MCC) Panel to accomodate all the drive units with cabling, glanding with in STP cum FSTP compartmental, design Indoor wall mounted type with top entry for cable the internal components either Siemen / GE shall be provided with 1no. Energy meter, control panel necessary cable ducts lighting fixtures, cabling for the entire plant, earthing, safety equipment’s and Allied Works including all civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all, etc complete.

Supply, Erection, testing and commissioning of Electromagnetic Flow meter for inlet raw sewage and outlet treated sewage including cables, earthing etc, complete

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Design, Engineering, and Technical Vetting of a combined STP and FSTP system. Scope includes: Site Survey and Soil Testing; Process and Hydraulic Design (PFD/HFD); Detailed Civil, Structural, and Electromechanical Drawings; Third-Party Technical Vetting from a Government Institute (IIT/NIT/Anna University);

Construction, Supply, Erection and Commissioning of Inlet chamber & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units and all connected works etc.complete.

Construction, Supply, Erection and Commissioning of Manual Screen Chambers with R.C.C Screen channels including manual medium Coarse and Fine screen civil & mechanical. monitoring, control and data acquisition on quality and quantity and their mechanical standby units all connected works etc. complete

Construction, Supply, Erection and Commissioning of Equalization Tank with coarse bubble diffusers, air supply pipes from Blowers to basin header,air supply dropper submerged in tank, submersible pumps, lifting arrangements for pumps including all mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete as per specification.

Construction, Supply, Erection and Commissioning of Secondary Clarifier including clarifier mechanism, guide channel, spindle, shaft, Sludge handling pumps (Re circulation pump) to transfer the sludge to sludge holding tank and to Aeration tank with all accessories etc. complete, with all connected civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete.

Construction, Supply, Erection and Commissioning of Sludge Holding Tank including all connected civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete.

Construction, Supply, Erection and Commissioning of Filter Feed Tank with Filter Feed pumps to transfer the sewage to Multi grade filters with all accessories etc. complete, all connected civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete.

Construction, Supply, Erection and Commissioning of Disinfection Tank complete, all connected civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all etc, complete.

Supply, Erection and Commissioning of Air blowers suitable to deliver dry oil free air to the Aeration tank and Equalisation tanks, with required air flow pipes, air flow meter, pressure gauges, valves, Air Blowers with accessories, electro mechanical & instrumentation accessories etc.,complete as per specification

Supply, Erection and Commissioning of Multi-Grade Sand Filter (MGF) to remove suspended solids and turbidity. Includes a high-strength pressure vessel (FRP or MS), graded layers of filter media (sand, pebbles, and gravel), and a frontal pipe assembly with valves for easy backwash and rinsing. Comes complete with pressure gauges and internal distribution systems for efficient water filtration.

Supply, Erection and commissioning of Online Chlorine Dosing Pump (HYPO) with dosing Tank including all necessary arrangements., as per specification etc., complete

Supply, Erection and commissioning of Online Polymer Dosing Pump (POLY) with dosing Tank including all necessary arrangements., as per specification etc., complete

Supply, Erection and commissioning of Filter Press Mechanism including Screw pumps and all necessary arrangements., as per specification etc., complete

Supply, Erection and commissioning of Motor Control Center (MCC) Panel to accomodate all the drive units with cabling, glanding with in STP cum FSTP compartmental, design Indoor wall mounted type with top entry for cable the internal components either Siemen / GE shall be provided with 1no. Energy meter, control panel necessary cable ducts lighting fixtures, cabling for the entire plant, earthing, safety equipment’s and Allied Works including all civil, mechanical, electrical & instrumentation works for monitoring, control and data acquisition on quality and quantity and their mechanical standby units all, etc complete.

Supply, Erection, testing and commissioning of Electromagnetic Flow meter for inlet raw sewage and outlet treated sewage including cables, earthing etc, complete

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Earthwork excavation and refilling for pipeline works having bed width of 1.25m and below on linear measurement basis.

Earthwork excavation in all soils and sub soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering , ramming ,depositing the surplus earth in the premises as directed by departmental officers etc., complete asper standard specification. (For Drain)

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain cement concrete 1:2:4 mix (One cement two sand and four aggregate) using 20mm ISS metal including mixing, laying, consolidating, curing cost and conveyanc of all materials to site and all labour charges etc., complete as per standard specification

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton.

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For circular/ curved surfaces such as RCC floor slab, roof slab, rcc walls, etc.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers.

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Supplying, fabricating and placing in position TMT bars (Fe 500) for all RCC works as per design given including cost of steel and G.I. binding wire for placing at all depths of excavation, complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel, binding wire and for bar bending)

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 20mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supply and delivery of HDPE Pipes - PE 100 as per IS 4984/2016 PN8 including cost and conveyance to site and all other incidental charges therefore etc complete

75 mm Dia HDPE Pipe

75 mm Dia HDPE Pipe

75 mm Dia HDPE Pipe

90 mm Dia HDPE Pipe

110 mm Dia HDPE Pipe

125 mm Dia HDPE Pipe

SPECIALS FOR HDPE PIPES AS PER IS 8360/1977/Part I(Reaffirmed 1992)Part II and III (Reaffirmed 2002) 90mm PN6 HDPE BEND

SPECIALS FOR HDPE PIPES AS PER IS 8360/1977/Part I(Reaffirmed 1992)Part II and III (Reaffirmed 2002) 90mm PN6 HDPE equal TEE

Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the department engineers

75 mm Dia HDPE Pipe

75 mm Dia HDPE Pipe

75 mm Dia HDPE Pipe

90 mm Dia HDPE Pipe

110 mm Dia HDPE Pipe

125 mm Dia HDPE Pipe

Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by Engineers.

75 mm Dia HDPE Pipe

75 mm Dia HDPE Pipe

75 mm Dia HDPE Pipe

90 mm Dia HDPE Pipe

110 mm Dia HDPE Pipe

125 mm Dia HDPE Pipe

Testing of pipes for water supply with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes.

75 mm Dia HDPE Pipe

75 mm Dia HDPE Pipe

75 mm Dia HDPE Pipe

90 mm Dia HDPE Pipe

110 mm Dia HDPE Pipe

125 mm Dia HDPE Pipe

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Providing and fixing Stainless steel grill work for screening of wastewater as per drawing including fixtures, necessary welding and finishing complete.(As per instruction of site engineer)

Supply and installation of submersible centrifugal sewage non-clog pumps Pump - with Panel Board and all other fittings(1 Working + 1 Standby)

10 m3/hr @ 50 m Head

20 m3/hr @ 50 m Head

25 m3/hr @ 50 m Head

15 m3/hr @ 50 m Head

15 m3/hr @ 50 m Head

50 m3/hr @ 50 m Head

Excavating of driving pit and receiving pit of size 3.00m (length) x 3.50m (breadth), upto 5m depth in all soil strata including shoring and strutting using 6mm tk MS Plate of size 3.50m x 3.50m usable for 20 operations and providing 16mm thickness MS plate of size 3.00m x 3.50m with 100mm x100mm x 12mm angles of 4m length for holding the MS plates for Thrust arrangements to receive the impacts during pushing operation of encasing pipe. Lowering the following size of MS encasing pipe by using Contractor’s crane and machineries and jointing MS pipes by welding, across the National Highways/ State Highways/ Railways/Canal crossing etc and driving the horizontal bore by pushing / jacking method (trenchless technology method) using contractor’s machineries such as cranes, jacks, jacking materials, generator, welding machineries, compressor, jack hammer and other equipments etc. without interfering and causing any hindrance to the movement of traffic or any other vehicles, without any disturbances to the railway/ road/canal formation etc. including bailing / pumping of water where ever necessary without affecting any installation like water

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Earthwork excavation and refilling for pipeline works having bed width of 1.25m and below on linear measurement basis.

Earthwork excavation in all soils and sub soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering , ramming ,depositing the surplus earth in the premises as directed by departmental officers etc., complete asper standard specification. (For Drain)

Plain Cement Concrete 1:5:10 (one part of cement, five part of Crushed Stone Sand (M- Sand) and ten part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain cement concrete 1:2:4 mix (One cement two sand and four aggregate) using 20mm ISS metal including mixing, laying, consolidating, curing cost and conveyanc of all materials to site and all labour charges etc., complete as per standard specification

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton.

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For circular/ curved surfaces such as RCC floor slab, roof slab, rcc walls, etc.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers.

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Supplying, fabricating and placing in position TMT bars (Fe 500) for all RCC works as per design given including cost of steel and G.I. binding wire for placing at all depths of excavation, complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel, binding wire and for bar bending)

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 20mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supply and delivery of HDPE Pipes - PE 100 as per IS 4984/2016 PN8 including cost and conveyance to site and all other incidental charges therefore etc complete

DHDPE Pipe 75 mm

HDPE Pipe 120 mm

SPECIALS FOR HDPE PIPES AS PER IS 8360/1977/Part I(Reaffirmed 1992)Part II and III (Reaffirmed 2002) 90mm PN6 HDPE BEND

SPECIALS FOR HDPE PIPES AS PER IS 8360/1977/Part I(Reaffirmed 1992)Part II and III (Reaffirmed 2002) 90mm PN6 HDPE equal TEE

Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the department engineers

HDPE Pipe 75 mm

HDPE Pipe 125 mm

Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by Engineers.

HDPE Pipe 75 mm

HDPE Pipe 125 mm

Testing of pipes for water supply with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes.

HDPE Pipe 75 mm

HDPE Pipe 125 mm

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Providing and fixing Stainless steel grill work for screening of wastewater as per drawing including fixtures, necessary welding and finishing complete.(As per instruction of site engineer)

Supply and installation of submersible centrifugal sewage non-clog pumps Pump - with Panel Board and all other fittings(1 Working + 1 Standby)

5 m3/hr @ 10 m Head

10 m3/hr @ 15 m Head

25 m3/hr @ 25 m Head

35 m3/hr @ 12m Head

40 m3/hr @15 m Head

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

1st year

Fixed (A)

Variable(B)

2nd year

Fixed (A)

Variable(B)

3rd year

Fixed (A)

Variable(B)

4th year

Fixed (A)

Variable(B)

5th year

Fixed (A)

Variable(B)

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

STP cum FSTP

Location A: B.Mallapuram

Design, construction, supply, erection and commissioning of Sewage Treatment Plant (STP) cum Faecal Sludge Treatment Plant (FSTP) with a capacity of 1.01 MLD at B.Mallapuram Town Panchayat

Location B: Marandahalli

Design, construction, supply, erection and commissioning of Sewage Treatment Plant (STP) cum Faecal Sludge Treatment Plant (FSTP) with a capacity of 2.01 MLD at Marandahalli Town Panchayat

Interception and diversion works

Location A: B.Mallapuram

Location B: Marandahalli

G.S.T (as applicable)

Please Enable Macros to View BoQ information