Design, fabrication, electrification, assembling, installation testing and commissioning of display board of Dr. R. N. Cooper Hospital.

1st category Al armoured cables FRLS outer sheathed- 4C x 6.0 Sq.mm

Cable End Termination For Aluminium Cables – 4C x 6 Sq.mm

100A TPN MCCB

ELCB with 100mA Sensitivity 63Amp. 4Pole

32A TPN MCB

600 X 600 X 3.15 mm Copper Plate, 3000mm dip with suitable size cu strip earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25X3 cu strip / 2X8SWG Cu.wire up to chamber, disconnecting links with 600 x 600 mm (clear) RCC chamber & 3mm thick heavy duty CI chequered plate cover with hinge. Bentonite shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scop

Earthing Continuity Conductors -25 x 3mm Tinned copper

Design,Fabrication & Installation of 4 mm thick exterior grade PVDF coated aluminium composite panels of ALUCOBOND having 0.5 mm thick aluminium PVDF coated sheet available in standard colours + 3 mm core material + 0.5 mm aluminium sheet chemically treated (back sheet ) bent as per requirement, fitted on anodised aluminium necessary coated rectangular grid work, hardware, fixtures,brackets, anchor, fasteners of S.S. 304 grade etc. complete duly sealed with weathering silicon manufactured by DOW corning / G.E. silicon for circular columns and curved beams etc complete. All section for supporting ACP shall be of size 50 x 50 x 2.5 mm at a distance of 1.2 m Horizontally & Vertically or asper requirement of the design shop drawing has to be submitted by the contractor for the approval of structural Engineer. a) For Terrace b) For Entrance Canopy REBATE FOR SIZES Size :39"-Bruhan mumbai Mahanagarpalika shri Harilal bhagwati sarvsadharan Rugnalay (For 11" = 505.94*11"/25" = Rs. 222.17 per Inch. Size :46"-MCGM SHRI HARILAL BHAGWATI GENERAL HOSPITAL (For 4" = 505.94*4"/25" = Rs. 80.95 per Inch

Providing & Fixing signage made of 15 mm thick solid white acrylic laser cut out letters for height up to 25" etc complete.

Providing & Fixing 15 mm thick solid white acrylic laser cut out BMC Logo etc complete.

LED flexible strip light 2 wire min of 4.8W

4W integral driver LED Steplight

Cranes of 3 tonnes Cappacity

Excavating the trenches and refilling the same after the cable is laid in approved manner (Size of trench: 750 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 Cu. Mtr. = 2.2 RMT. And reinstatement.

Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.

Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.)

Cement mortar 1:3 (1 cement : 3 coarse sand)