Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.9 LAdmitted-Finance | -26.00% | ₹1.9 L | L1 | Admitted-Finance |
| 2 | L2₹2.4 LAdmitted-Finance | -6.99% | ₹2.4 L | L2 | Admitted-Finance |
Updated dates
Tender Value
₹2.6 L
EMD Value
₹5,180
Closing Date
30 Jan 2026, 6:00 pmClosed
Er Parvez Malik
PWD Div Jammu East
Repair and Renovation of Office Complex of S.S.P Enforcement Office of Deputy Director Planning Directorate of Tourism, Jammu under Non-plan
2026_PWDJK_300926_1
115 of 2025-2026 dated 19-01-2026
Open Tender
Civil Works
30 days
Jammu
Please refer Tender documents.
3 documents required · 3 mandatory
₹600
as per NIT
₹5,180
3 Feb 2026
19 Jan 2026
31 Jan 2026
19 Jan 2026
30 Jan 2026
19 Jan 2026
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood.
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 30MM Thick : Second class deodar wood
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately. Powder coated aluminum (minimum thickness of powder coated 50 microns).
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns).
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.): With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm).
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. : Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. :100 mm
Providing and fixing aluminum butt hinges anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 94x45x3.2 mm
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead .For thickness of tiles 10 mm to 25 mm
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) :
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 20 mm dia. nominal bore
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand:10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design. : All around PVC pipe 100 mm diameter PVC pipe
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes110 mm diametre.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe 40mm.
Providing and fixing of following size of PVC (Prince make or equivalent) Fitting ISI Marked.
110mm dia Plain Bend
110mm dia Plain Tee
110mm dia Door Bend
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereverrequired:-White Vitreous China Wash basin size 630x450 mm with a 15 mm CP Brass single hole basin mixer.
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
Providing and fixing 15 mm nominal bore C.P. brass angle valve of approved brand as per the directions of Engineer-in-charge.
Providing and fixing CP waste Coupling of approved brand as oper directions of Engineer-in-charge
Providing and fixing PVC Waste pipe-3/4" of approved brand as oper directions of Engineer-in-charge
Providing and fixing CP Soap case.
Providing and fixing of CP Grating.
Providing and fixing 15mm dia 2" long CP nipples.
Providing and fixing PVC connection pipe upto 18" long.
Providing and fixing CP Towel Ring
Providing and fixing of Steel Shelf of Superior quality
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Circular shape 450 mm dia
Providing and fixing CP Cup
Providing and fixing Blinds for windows including all fixtures and fittings and necessary arrangements etc. complete job. Zebra Blinds (superior quality) including cost of providing and fixing of Roller asembly as approved by Engineer-in-charge.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. : 2 mm thick
Finishing walls with acrylic smooth paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of cement primer applied @ 2.20kg/10sqm). (Brand : Nerolac Excel/Berger Champ/Asian Apex or equivalent.)
Engaging Labour for shifting of furniture and furnishing items before start of work and re-fixing after completion of work, cleaning of tile flooring etc. and other emergent kind of works.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.50 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead. With cement mortar 1:4 (1 cement : 4 fine sand).
Providing and fixing UV PVC Sheet Wall panelling of approved design and quality including necessary adhesive(of fevicol brand or equivalent) screws,nuts etc. all complete including wastage etc. : UV PVC (polyvinyl chloride) Marble sheets designed to mimic the appearance of natural marble. Manufactured by UV-cured printing process to create high-resolution marble patterns and textures on the surface of PVC sheets-3 MM thick (Heavy Duty) including Golden strips and golden nails as per requirement and as per the design approved by engineer-in-charge.
Engaging Mason for minor Repair works and making good the walls.
Labour with mason
Engaging Plumber for removing of old damaged fittings of toilets including minor repairs of fittings and fixtures.
Engaging Carpenter for Repairing works of wood work including cost of material like wood filler,nails etc. complete job.
Providing and fixing 6mm thick PVC hollow panels of superior quality approved texture for plain lining/cladding with necessary screws in true vertical level fixed on Grooves. PVC panels to be interlocked with tongue & grooved joints with each other panel to form rigid and joint less including required cutting /making, opening for services etc. All complete as per specifications, drawings and as directed by Engineer-in-charge.
Repair of sofas by way of removing Existing/damaged upholstery from seat and back rest and replace it with new one, including the replacement of damaged part in wood structure and providing/fixing of new arm rests wherever required including cost of wood/foam/fabric (full upholstery) etc., changing metal springs in base/seating if required, providing/fixing of seating/backrest cushion of polyurethane foam of high quality with its upholstery, nails, fevicol, ply and along with all fittings including carpenter/helper/labour for shifting of furniture to working space as provided by intending department and re-fixing of same after repairing etc. complete job in all respects. as approved by Engineer in charge. Density of Cushion/foam of Backrest and Seat Material +-3(Kg/Cubic M)=45, Seat Cushion Thickness ±3 (mm) =125 , Backrest Cushion Thickness ±3 (mm) 75, Thickness of Foam/Rubber in arms ±2 (mm) = 50 Thickness of Foam/Rubber in back ±2 (mm)= 75, Thickness of Foam/Rubber in front ±2 (mm) 25, Thickness of Foam/Rubber in sides ±2 (mm)= 20, Type and colour of fabric = Leatherette/Velvet/Suede as approved by Engineer-in-Charge.Make of Foam : Sleepwell /kurl-on /Nindiya as approved by Engineer-in-charge. : Three(03) seater Sofas.
Disposal of mulba beyond municipal limits(10 km avg. lead).
Carriage of material by mechanical transportation including loading ,unloading and stacking complete for an average lead of 10 kms : Aggregate below 40mm
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.98 MB
BOQ_976332.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid