GE/ALP (8154B) KOLKATA OF 2022-23

Amount

Locker: Supply & Fixing of top/bottom made of 19mm BWR ply for Locker, including dismantling of aforesaid unserviceable components carefully without disturbing the adjoining parts complete all as specified and as directed by the Engr-in-charge. Ref drawing No FD-54/222

All as per item No 1 here in before but Shelf made of 12mm BWR ply to be fixed on 12x20 mm TW bearer complete all as specified and as directed

All as per item No 1 here in before but Vertical patition made of 12mm BWR ply complete all as specified and as directed

All as per item No 1 here in before but Side made of 19mm BWR ply complete all as specified and as directed

All as per item No 1 here in before but Leg 50x50mm at top and 40x40mm at bottom made of 1st class TW complete all as specified and as directed

All as per item No 1 here in before but Shutter made of 19mm BWR ply complete all as specified and as directed

All as per item No 1 here in before but Aluminium handle 100mm long for shutter complete all as specified and as directed

All as per item No 1 here in before but Aluminium Hasp & Staple 75mm long for shutter complete all as specified and as directed

All as per item No 1 here in before but Long stiffner made of 1st class TW complete all as specified and as directed

All as per item No 1 here in before but 20mm dia chromium plated steel conduit pipe hanger rod with wdn brackets complete all as specified and as directed

All as per item No 1 here in before but 6mm BWR ply for back side complete all as specified and as directed

All as per item No 1 here in before but Applying two coats of oil paint of approved shade after applying primer complete all as specified and as directed

Bed with FMN: Supply and fixing for 12 mm thick BWR Grade-I ply of size 6'.3" x 3' for Bed with FMN, duly fixed with screws with carpentry joints in tact tightly fixed with glue, feviol, bamboo pins etc and polish repair part to match with rest of the item by removing u/s components as directed by the Engr-in-charge Make : ISI brand (Archid/Century/ Greenply) Note : Ref drawing No FD-21

All as per item No 2 here in before but Head board frame of bed with 4mm BWR grade OST Ply (approved brand) by providing TW beading all around complete all as specified and as directed

All as per item No 2 here in before but Soft wood batten 19x75x185 mm for head board complete all as specified and as directed

All as per item No 2 here in before but Soft wood batten 19x75x450 mm for head board complete all as specified and as directed

All as per item No 2 here in before but Soft wood batten 19x75x758 mm for head board complete all as specified and as directed

All as per item No 2 here in before but Foot board frame of bed with 4mm BWR grade OST Ply (approved brand) side by providing TW beading all around complete all as specified and as directed

All as per item No 2 here in before but Ist class TW long rail of size 65x50x1980 mm complete all as specified and as directed

All as per item No 2 here in before but Ist class TW base Stiffiner 40x60x900 mm to ply support complete all as specified and as directed

All as per item No 2 here in before but Ist class TW Support stiffner at Foot/Head board of size 60x60x900 mm complete all as specified and as directed

All as per item No 2 here in before but Ist class TW frame over battens at Foot/Head board of size 30x60x900mm complete all as specified and as directed

All as per item No 2 here in before but round leg 2'' dia at top and 1" dia at bottom and 16" length made of 1st class TW complete all as specified and as directed

Stool dressing: Supply and fixing Leg of Ist class teak wood including dismantling of unserviceable components of furniture item carefully without disturbing the adjoining parts and polish the replaced parts to match with the rest of the items and S&F of PVC shoe/buffer complete all as specified and as directed by the Engr-in-Charge. Note : (i) All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required for completion of repair. Note : Ref drawing No FD-27/282

All as per item No 3 here in before but long rail complete all as specified and as directed

All as per item No 3 here in before but short rail complete all as specified and as directed

All as per item No 3 here in before but side stiffner complete all as specified and as directed

All as per item No 3 here in before but center stiffner complete all as specified and as directed

Table 900x600 mm with drawer: Supply and fixing for Leg of Ist class teak wood including dismantling of unserviceable components of furniture item carefully without disturbing the adjoining parts and polish the replaced parts to match with the rest of the items and S&F of PVC shoe/buffer complete all as specified and as directed by the Engr-in-Charge. Note : (i) All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required for completion of repair. Note : Ref drawing No FD-283

All as per item No 4 here in before but long rail complete all as specified and as directed

All as per item No 4 here in before but short rail complete all as specified and as directed

All as per item No 4 here in before but side stiffner complete all as specified and as directed

All as per item No 4 here in before but drawer front made of 18mm particel board exterior grade complete all as specified and as directed

All as per item No 4 here in before but drawer bottom made of 6mm thick BWR ply complete all as specified and as directed

Table with marble top (4'x2'x 2'6"): Supply and fixing for Leg of Ist class teak wood including dismantling of unserviceable components of furniture item carefully without disturbing the adjoining parts and polish the replaced parts to match with the rest of the items and S&F of PVC shoe/buffer complete all as specified and as directed by the Engr-in-Charge. Note : (i) All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required for completion of repair. Note : Reference drawing No FD-299/300

All as per item No 5 here in before but white marble slab of 18 mm thickness of size 1220x600 mm with half bullnose chamfering as table top fixing on exitising frame of Table with marble top (4'x2'x2'6") after and including dismantling of old unserviceable top and tightening all loose components properly complete all as specified and as directed

All as per item No 5 here in before but Ist class teak wood for long rail of Table with marble top (4'x2'x2'6") complete all as specified and as directed by the Engr-in-charge.

All as per item No 5 here in before but Ist class teak wood for short rail of Table with marble top (4'x2'x2'6") complete all as specified and as directed by the Engr-in-charge.

Table bed side : Supply & Fixing for carefully dismantling the damaged worn-out i.e side of the frame of Table bed side made out of 18/19 mm thick Pre-laminated (OSD) particle board extr grade fixed with 4 mm TW edging of front side complete all as specified and shown on drg, and directed by the Engr-in charge Note: Ref drawing No FD-276

All as per item No 6 here in before but top of Table bed side made out of 18/19mm thick Pre-laminated (OSD) particle board extr grade fixed with 4 mm TW edging of front side complete all as specified and as directed

All as per item No 6 here in before but shelf of Table bed side made out of 12mm thick pre-laminated particle board with teak veneered top extrerior grade-I fixed with 4mm TW edging of front side complete all as specified and as directed

All as per item No 6 here in before but back of Table bed side made out of 6mm thick BWR ply (Archid/Greenply/Century) duly fixed to the frame with headless nails complete all as specified and as directed

Chair Dinning: Supply & Fixing of new components made of Ist class teak wood for Rear leg of Chair Dinning, all joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required including dismantling of aforesaid unserviceable components carefully without disturbing the adjoining parts complete all as specified and as directed by the Engr-in-charge. Ref drawing No FD-16/203/279

All as per item No 7 here in before but Front leg complete all as specified and as directed

All as per item No 7 here in before but Back rest complete all as specified and as directed

All as per item No 7 here in before but Seat side rail including drilling holes for canning complete all as specified and as directed

All as per item No 7 here in before but Front rail including drilling holes for canning complete all as specified and as directed

All as per item No 7 here in before but Rear rail including drilling holes for canning complete all as specified and as directed

All as per item No 7 here in before but Side / centre stiffener complete all as specified and as directed

Chair Easy: Supply & Fixing for new components made of Ist class teak wood for Rear leg of Chair Easy, all joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required including dismantling of aforesaid unserviceable components carefully without disturbing the adjoining parts complete all as specified and as directed by the Engr-in-charge. Ref drawing No FD-17/201/229

All as per item No 8 here in before but Front leg complete all as specified and as directed

All as per item No 8 here in before but Seat side rail including drilling holes for canning complete all as specified and as directed

All as per item No 8 here in before but Seat front frame including drilling holes for canning complete all as specified and as directed

All as per item No 8 here in before but Seat rear frame including drilling holes for canning complete all as specified and as directed

All as per item No 8 here in before but Rear/front rail under seat complete all as specified and as directed

All as per item No 8 here in before but Back frame including drilling holes for canning complete all as specified and as directed

All as per item No 8 here in before but Back bottom frame including drilling holes for canning complete all as specified and as directed

All as per item No 8 here in before but Back side frame complete all as specified and as directed

All as per item No 8 here in before but Wooden member (size 20x15) screwed to side frame including drilling holes for canning complete all as specified and as directed

All as per item No 8 here in before but Arm rest complete all as specified and as directed

Chair writing: Supply & Fixing for new components made of Ist class teak wood for Rear leg of Chair writing, all joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required including dismantling of aforesaid unserviceable components carefully without disturbing the adjoining parts complete all as specified and as directed by the Engr-in-charge. Ref drawing No FD-20/280

All as per item No 9 here in before but Front leg complete all as specified and as directed

All as per item No 9 here in before but Seat side rail including drilling holes for canning complete all as specified and as directed

All as per item No 9 here in before but Rear rail including drilling holes for canning complete all as specified and as directed

All as per item No 9 here in before but Front rail including drilling holes for canning complete all as specified and as directed

All as per item No 9 here in before but Side/ Centre stiffener complete all as specified and as directed

All as per item No 9 here in before but Back rest complete all as specified and as directed

All as per item No 9 here in before but Arm rest complete all as specified and as directed

Canening: Supply & Fixing for caneing with approved shade of plastic cane of 2 mm wide, 0.5 thick half-round as per Godrej pattern and providing 4 mm wide half-round border all around as shown in the drawing after with and including removing of wornout unserviceable cane for Chair dining / Chair CB'B' Wooden complete all as specified and as directed by the Engr-in-charge. Note : Ref drawing No FD- 16/203/228/279

Chair easy (seat) Ref drawing No FD-17/201/229

Chair easy (back) Ref drawing No FD-17/201/229

Chair writing / Chair CB'A' wooden Ref drawing No FD-20/202/250/280

Stool dressing Ref drawing No FD-27/282

Polishing: Material & Labour for applying polish to obtain glossy finish including preparation of polished surface by removing and cleaning of existing polish with the sand paper and fill the surface with Bee wax putty for making the surface for Book Case complete all as specified and as directed by the Engr-in-charge Note : Ref drawing No FD-45/237

All as per item No 11 here in before but Bed with FMN Ref drawing No FD-21

All as per item No 11 here in before but Charpoy wdn with plytop Ref drawing No FD-39/227

All as per item No 11 here in before but Stool dressing Ref drawing No FD-27/282

All as per item No 11 here in before but Table 900 x 600 mm with drawer Note : Ref drawing No FD-283

All as per item No 11 here in before but Table with marble top (4'x2'x 2'6") Note : Reference drawing No FD-299/300

All as per item No 11 here in before but Table centre (size 500x450 mm) Note : Ref drawing No FD-274

All as per item No 11 here in before but Teapoy (size 450x600 mm). Note : Ref drawing No FD-278

All as per item No 11 here in before but Peg table (size 450x300 mm) Note : Ref drawing No FD-277

All as per item No 11 here in before but Table dining for 6 or 8 persons Note : Ref drawing No FD-30/239/273/376, FD/MAP-II/03

All as per item No 11 here in before but Chair dinning Note : Ref drawing No FD-279,203,228,16

All as per item No 11 here in before but Chair easy Note : Ref drawing No FD-201,229,17

All as per item No 11 here in before but Chair writing Note : Ref drawing No FD- 20,202,250,280

All as per item No 11 here in before but Rack rifle

All as per item No 11 here in before but Table office clerk Note: Ref drawing No DB-4120

All as per item No 11 here in before but Table Office Officer wooden (Size 1680x870 mm) Note : Ref drawing No DB-4120

All as per item No 11 here in before but Table bed side FD-28/210

All as per item No 11 here in before but Table bed side FD-276

All as per item No 11 here in before but Table writing FD-33/33(M)/249/275

All as per item No 11 here in before but Table 3'x3' w/o drawer Note: Ref drawing No FD-291

All as per item No 11 here in before but Sofa set 5 seater Note: Ref drawing No FD-281

All as per item No 11 here in before but Sofa set 4 seater Note: Ref drawing No FD-281

All as per item No 11 here in before but Book shelf open small Note: Ref drawing No DB-4121

All as per item No 11 here in before but Peg set of six Note: Ref drawing No FD-80

All as per item No 11 here in before but Peg set of three Note: Ref drawing No-80

All as per item No 11 here in before but Almirah mess utensil Note: Ref drawing No FD-93/93(M)/254

All as per item No 11 here in before but Looking mirror 1560x430

Applying two coats of synthetic enamelled paint after applying one coat of creosote oil after making surface smooth for Trestle store room Note: Ref drawing No DB-4292, FD-36/86

Supply & fixing for Cushion covers duly stitched with zip Sofa set 4 / 5 seater after with and including taking down of the existing unserviceable one complete all as specified and as directed. Note: Cost of cloth should not be less than Rs 300 RM Note : Reference drawing No FD-281

All as per item No 12 here in before but Foam cool density 40 of size 21"x22"x100 mm thick duly covered with white marking cloth and stiched all sides complete all as specified and as directed. Make : Kurlon or Sleepwell Note: Ref drawing No FD-281

Table 900x900 mm: Supply and fixing for Leg of Ist class teak wood including dismantling of unserviceable components of furniture item carefully without disturbing the adjoining parts and polish the replaced parts to match with the rest of the items and S&F of PVC shoe/buffer complete all as specified and as directed by the Engr-in-Charge. Note : (i) All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required for completion of repair. Note : Ref drawing No FD-291

All as per item No 13 here in before but wooden rail complete all as specified and as directed

All as per item No 13 here in before but wooden corner complete all as specified and as directed

Table dressing gents: Supply & fixing for 5 mm thick mirror of size 380x760 mm including tightening frame components with wooden pin of Table dressing gents complete all as specified and directed Make : Modigaurd/Saint gobain/Atul Note : Ref drawing No FD-230

All as per item No 14 here in before but 6mm thick BWR Ply wood as back side of mirror including tightening of all loose components of Table dressing gents complete all as specified and directed

All as per item No 14 here in before but 12 mm thick Ist class Teak Wood as drawer and 6 mm thick BWR ply wood for its bottom of Table dressing gents complete all as specified and directed

All as per item No 14 here in before but 18/19 mm thick Pre-laminated particle board exterier grade - I (OSL) as top including 3 mm Teak Wood beading alround and polished the same to match the existing of Table dressing gents complete all as specified and directed

All as per item No 14 here in before but side of Table dressing gents complete all as specified and directed

Supply & fixing for 5 mm thick mirror of size 1560x430 mm including tightening frame components with wooden pin of Looking mirror w/wooden frame complete all as specified and directed Make : Modigaurd/Saint gobain/Atul

All as per item No 15 here in before but S & F of wooden frame made of 1st class TW duly covered back side with 6mm BWR ply and fixed with two picture plates for hanging complete all as specified and directed

Supply and fixing for 12 mm thick BWR Grade-I ply of size 6'.3" x 3' for Charpoy wdn with plytop, duly fixed with screws with carpentry joints in tact tightly fixed with glue, feviol, bamboo pins etc and polish repair part to match with rest of the item by removing u/s components as directed by the Engr-in-charge Make : ISI brand (Archid/Century/ Greenply) Note : Ref drawing No FD-39/227

Particle board top: Supply and fixing for 18/19 mm thick Pre-laminated particle board exterior grade (OSL) as table top fixing with screws on exitising frame after and including dismantling of old unserviceable top and tightening all loose components properly and providing 4 mm thick Teak wood beading alround duly polished and applying two coats of french polish to beading of the tables for obtaining glossy finish of Top of Table writing (Size 1145 x 600 mm) complete all as specified and as directed by the Engr-in-Charge. Make : ISI brand (Century/ Archid/Greenply) Note : Ref drawing No FD-275

All as per item No 17 here in before but for Table centre (size 500x450 mm) Note : Ref drawing No FD-274

All as per item No 17 here in before but for Teapoy (size 450x600 mm). Note : Ref drawing No FD-278

All as per item No 17 here in before but for Peg table (size 450x300 mm) Note : Ref drawing No FD-277

All as per item No 17 here in before but for Table dining 6 pers (Size 1500x900 mm) Note : Ref drawing No FD-239/273

All as per item No 17 here in before but for Table (size 900x600mm) with or with out drawers. Note : Ref drawing No FD-283/284

All as per item No 17 here in before but for Table (size 900x900mm) Note : Ref drawing No FD-291

All as per item No 17 here in before but for Table Office Officer wooden (Size 1680x870 mm) Note : Ref drawing No DB-4120

All as per item No 17 here in before but for Table clerk wooden (Size 1200x750 mm) Note : Ref drawing No DB-4120

Trestle store room: Supply & fixing for top batten of Trestle store room (2440x100x100) mm of 1st class sal wood all joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required including dismantling of aforesaid unserviceable components carefully without disturbing the adjoining parts complete all as specified and as directed by the Engr-in-charge. Note: Ref drawing No DB-4292, FD-36/86

All as per item No 18 here in before but top batten of Trestle store room (2040x60x100)mm complete all as specified and directed

All as per item No 18 here in before but top batten of Trestle store room (600x60x100)mm complete all as specified and directed

All as per item No 18 here in before but top batten of Trestle store room (405x100x100)mm with (100x100)mm at top and (75x75)mm at bottom complete all as specified and directed

Repairs: Supply and fixing for Leg (size 60x30x 540 mm) for Tepoy of Ist class teak wood including dismantling of unserviceable components of furniture item carefully without disturbing the adjoining parts and polish the replaced parts to match with the rest of the items and S&F of PVC shoe/buffer complete all as specified and as directed by the Engr-in-Charge. Note : (i) All joints to be fixed with bamboo pins, wooden screws, Fevicol and wooden putty where ever required for completion of repair. Note : Ref drawing No FD-278

All as per item No 19 here in before but Leg (size 75x40x760 mm) of Table dining 6/8 pers. Note : Ref drawing No FD-273

All as per item No 19 here in before but Middle stiffener (size 100x25x900 mm) of Table dining 6/8 pers. Note : Ref drawing No FD-273

All as per item No 19 here in before but Leg (size 60x30x400mm) of Table center. Note : Ref drawing No FD-274

All as per item No 19 here in before but Long rail of Table center. Note : Ref drawing No FD-274

All as per item No 19 here in before but stiffener (size 50x20x450 mm) of Table center. Note : Ref drawing No FD-274

All as per item No 19 here in before but Leg (size 30x50x380 mm) of Peg Table Note : Ref drawing No FD-277

All as per item No 19 here in before but Bottom rail (size 20x40x300mm) of Peg Table. Note : Ref drawing No FD-277

All as per item No 19 here in before but stiffner of Peg Table. Note : Ref drawing No FD-277

All as per item No 19 here in before but Leg (size 50x35x760 mm) of Table Writing Note : Ref drawing No FD-275

All as per item No 19 here in before but Centre stiffener (size 50x25x1145 mm) of Table Writing. Note : Ref drawing No FD-275

All as per item No 19 here in before but Side stiffener (size 20x50x600 mm) of Table Writing . Note : Ref drawing No FD-275

All as per item No 19 here in before but 25mm wide stainlees steel Piano hinge for shutter of Table Writing. Note : Ref drawing No FD-275

All as per item No 19 here in before but of 18/19 mm thick Pre-laminated particle board exterior grade OST door shutter with TW beading of Table Writing Note : Ref drawing No FD-275

All as per item No 19 here in before but 6 mm thick ply wood for base of drawer of Table Writing. Note : Ref drawing No FD-275

All as per item No 19 here in before but 12 mm thick Teak Wood side plank for drawer of Table Writing Note : Ref drawing No FD-275

All as per item No 19 here in before but Leg (size 60x30x760 mm ) of Table ( 900x900 mm). Note : Ref drawing No FD-291

All as per item No 19 here in before but Leg (size 60x30x760 mm) of Table (size 900x600 mm) with or with out drawer Note : Ref drawing No FD-283/284

All as per item No 19 here in before but 12 mm thick Teak Wood as side plank of drawer of Table (size 900x600mm) with or with out drawer Note : Ref drawing No FD-283/284

All as per item No 19 here in before but 6 mm thick ply top for base of drawerr of Table (size 900x600 mm) with or with out drawer Note : Ref drawing No FD-283/284

TOTCO

RADHA ENTERPRISE

Tirupati Buildcon Pvt. Ltd.

BENGAL TRADERS

MAZUMDER & CO

SPECIAL CONCRETE AND CONSTRUCTION CO.

SKS TRADERS