Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
16 Sept 2026, 4:00 pm6d left
Bengaluru East City Corporation
Uday chougule
Improvements and repairs to yemalur anganawadi kendra & library building in ward no 46 yemalur.
BECC/2026-27/OW/WORK_INDENT626
BECC/2026-27/OW/WORK_INDENT626
Open
Other Works
Two Tender Document System(Two Cover)
BECC Marathalli Division
5 documents required · 2 mandatory · 3 optional
Department Registration Details
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
Work done certificate
License validity
Turn over certificate
₹500
₹40,000
4 Sept 2026
3 Sept 2026
17 Sept 2026
8 Sept 2026
8 Sept 2026
Improvements and repairs to yemalur anganawadi kendra & library building in ward no 46 yemalur.
Removing and Refixing stone slabs of drains and pointing in C.M(1:3)Data rate
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 5...
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. (100mm dia pipe) (Page No...
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. Asbestos cement sheet. (Page No...
Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and re plastering the surface of the wall includ...
Removing white or colour wash by scrapping and sand papering and prex0002paring the surface smooth including necessary repairs to scratches etc. complete as per specifications and as per directions of...
Extra for removing white wash or colour wash by steel brushing and / or scraping, sand papering the ceiling and / or sloping roof surface smooth including repairs to scratches, cost of material, labou...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles above 25 m...
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including TandP and scaffolding wherever n...
Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3) (Sr Page no.5 Item no.1.1a Vol-3)Quantity vide Item No.1,.2,3,4
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 percentage and conforming to I.S. 15622, of approved make, in all colours and shade,...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite/t...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...
Supply and fixing RCC Pre-cast Cover Slab of size 0.8 m x 0.8 m x 0.15m of M25-Design mix concrete with 12 mm steel at 120 mm c/c both ways, over Gate valve extension spindle with central opening alon...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied at 1.67 ltr/10 m² over and including priming coat of exterior primer applied at 2.20 kg/10 m²) with p...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Polyurethane based water proofing for Retaining Wall.Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moistur...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing the pip...
Providing and fixing Chorinated Poly Venyl(CPVC) pipes confirming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixi...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :Page No-117,Item No-13.5.3 (Volume-2)
Providing and fixing of Door locking arrangements(page a-20,item no 274)
Providing and fixing of Handles powder coated 150mm(page A-25,item No,433)
Providing and fixing of Hinges 5" heavy duty(Page No.A-25,item No443)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mm SR Pg No-219,Item No-22.15.7 (Vol-2)
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements and all necessary accessories complete - Class Premium (P.No. 139, I.No. 14.55B Vol-2)
Providing and fixing in position brass bib cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificatio...
Providing and fixing in position brass stop cock of approved quality of as per dia nominal bore including cost of all materials,labour and HOM of equipments with all leads complete as per specificati...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :*100 mm inlet ...
Providing and fixing PTMT grating of approved quality and colour.Providing and fixing PTMT grating of approved quality and colour.
Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
6A Three Way socket (P.No.9-Sl.No 3.6.3) and of KPWD electrical SR 23-24 Vol- 6.
32A DP Switch (P.No.9-Sl.No 3.6.9) and of KPWD electrical SR 23-24 Vol- 6.
Electronic stepped regulator. (P.No.9-Sl.No 3.14.16) and of KPWD electrical SR 23-24 Vol- 6.
6A Batten Holder (P.No.10-Sl.No 3.14.7) and of KPWD electrical SR 23-24 Vol- 6.
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 10" x 8...
Supplying and fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.16 A (P.No.14-Sl.No 5.7.1) and of KPWD electrical SR 23-24 Vol- 6.
Supplying and fixing regular MCB distribution boards on wall/pod board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70percentage lumen maintenance with CRI greater than 80. Power Input:...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. 300 mm Sweep (P.No.30-Sl.No 6.5.1) and of KPWD electrical SR 23-24 Vol- 6.
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply (P.No.30-Sl.No 6.1) and of KPWD electrical SR 23-24 Vol-...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1 sl no 31 46.doc
Tender Document • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .