Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹3,500
EMD Value
₹4 L
Closing Date
16 May 2025, 2:00 pmClosed
Executive Engineer EDD Leh
PDD Choglamsar
same as above
2025_PDNRE_16258_1
e-NIT No. 21 of ED Leh of 2025-26 dated 09-05-2025
Open Tender
Electrical Works
Turn-key
365 days
Leh
Please refer Tender documents.
6 documents required · 6 mandatory
₹3,500
Payable To Executive Engineer EDD Leh
₹4 L
17 May 2025
9 May 2025
17 May 2025
9 May 2025
16 May 2025
10 May 2025
Amount
Supply/Installation/Testing/Commissioning of Distribution Transformer Substation of different capacity as per REC Constructional Standard .
11/0.433kV, 3-phase 630KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Copper wound and with LV Cable Box having detachable Aluminium Gland plate
11/0.433kV, 3-phase 400KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Copper wound and with LV Cable Box having detachable Aluminium Gland plate
11/0.433kV, 3-phase 250 KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Copper wound and with LV Cable Box having detachable Aluminium Gland plate
11/0.433kV, 3-phase 200 KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Aluminium wound and with LV Cable Box having detachable Aluminium Gland plate
11/0.433kV, 3-phase 100 KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Aluminium wound and with LV Cable Box having detachable Aluminium Gland plate
11/0.433kV, 3-phase 63 KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Aluminium wound and with LV Cable Box having detachable Aluminium Gland plate
11/0.433kV, 3-phase 25 KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Aluminium wound and with LV Cable Box having detachable Aluminium Gland plate
Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type
11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
11 kV Horn Gap Fuse Set 3 Phase 200A
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 300mmsq cross section un-armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 185mmsq cross section un-armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 120mmsq cross section un-armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 95mmsq cross section un-armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 70mmsq cross section un-armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 50mmsq cross section un-armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 35mmsq cross section un-armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 25/20mmsq cross section un-armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 16mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 300mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 300mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 185mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 120mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 95mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 70mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 50mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 35mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 25/20mmsq cross section un-armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 16mmsq cross section un-armoured XLPE cable, FRLS
11KV AB Cable kit 3-core (heat shrinkable) outdoor type 35mmsq
11KV AB Cable kit 3-core (heat shrinkable) indoor type 35mmsq
11KV AB Cable kit 3-core (heat shrinkable) outdoor type 16mmsq
11KV AB Cable kit 3-core (heat shrinkable) indoor type 16mmsq
11KV AB Cable kit 3-core (heat shrinkable) outdoor type 50mmsq
11KV AB Cable kit 3-core (heat shrinkable) indoor type 50mmsq
11KV AB Cable kit 3-core (heat shrinkable) outdoor type 70mmsq
11KV AB Cable kit 3-core (heat shrinkable) indoor type 70mmsq
11KV AB Cable kit 3-core (heat shrinkable) outdoor type 120mmsq
11KV AB Cable kit 3-core (heat shrinkable) indoor type 120mmsq
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 300mmsq cross section armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 185mmsq cross section armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 120mmsq cross section armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 95mmsq cross section armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 70mmsq cross section armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 50mmsq cross section armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 35mmsq cross section armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 25/20mmsq cross section armoured XLPE cable, FRLS
Single Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 16mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 300mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 300mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 185mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 120mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 95mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 70mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 50mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 35mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 25/20mmsq cross section armoured XLPE cable, FRLS
3&1/2 Core Aluminium (Al.) LT Power Cable (1.1KV Grade) 16mmsq cross section armoured XLPE cable, FRLS
3x185mmsq 11KV Grade (E) Aerial Bunched Cable
3x120mmsq 11KV Grade (E) Aerial Bunched Cable
3x95mmsq 11KV Grade (E) Aerial Bunched Cable
3x50mmsq 11KV Grade (E) Aerial Bunched Cable
3 Core Cable Termination Kit
Single Core Cable Termination Kit
35mmsq LT AB Cable
50mmsq LT AB Cable
70mmsq LT AB Cable
95mmsq LT AB Cable
120mmsq LT AB Cable
9 Mtr. Long Pole,ST-410 SP33)
33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm
GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap
Galvinized Nuts and Bolts.
Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm
Transformer Bed (Block mass Concrete of ratio 1:2:4 ) of dimension (6x6x6)ft
LT Distribution Box for 400KVA Distribution Transformer fabricated out of 16SWG Steel Sheet duly Powder Coated and having Locking arrangements with following Accessories: 1. MCCB 630A TPN 36 KA=1 No Incomer) 2. Aluminium Bus Bar 630A TPN=1 set 3. MCCB 250A TPN 25KA=3 No (Outgoing)
LT Distribution Box for 250KVA Distribution Transformer fabricated out of 16SWG Steel Sheet duly Powder Coated and having Locking arrangements with following Accessories: 1. MCCB 400A TPN 36 KA=1 No Incomer) 2. Aluminium Bus Bar 400A TPN=1 set 3. MCCB 250A TPN 25KA=3 No (Outgoing)
LT Distribution Box for 100KVA Distribution Transformer fabricated out of 16SWG Steel Sheet duly Powder Coated and having Locking arrangements with following Accessories: 1. MCCB 160A TPN 16 KA=1 No Incomer) 2. Aluminium Bus Bar 160A TPN=1 set 3. MCCB 63A TPN 16KA=3 No (Outgoing)3. MCCB 40A TPN 16KA=3 No (Outgoing)
LT Distribution Box for 63KVA Distribution Transformer fabricated out of 16SWG Steel Sheet Buly Powder Coated and having Locking arrangements with following Accessories: 1. MCCB 100A TPN 16 KA=1 No Incomer) 2. Aluminium Bus Bar 100A TPN=1 set 3. MCCB 40A TPN 16KA=3 No (Outgoing)
LT Distribution Box for 25KVA Distribution Transformer fabricated out of 16SWG Steel Sheet duly Powder Coated and having Locking arrangements with following Accessories: 1. MCCB 40A TPN 16 KA=1 No Incomer) 2. Aluminium Bus Bar 40A TPN=1 set 3. MCCB 20A TPN 16KA=3 No (Outgoing)
MCB 100 A 3 pole
MCB 63 A 2 pole
MCB 20 A 2 Pole
Multistand cu wire 1mmsq
Multistand cu wire 2.5 mmsq
Multistand cu wire 4mmsq
5 A ON/OFF Switch Box assembly
15 A ON/OFF Switch Box assembly
15A Combine Box
5A Combine Box
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Wedge Connectors / PG Clamps
Danger Plates with Clamps
GI Barbed Wire for Anti Climbing
11KV HT Metering CT & PT Operated Complete in all respect(Detail enclosed as annexure-A)
3-Ø, 4-Wire Trivector Meter with CT(LTCT AMR compatible)
Cement bottoming 1:2:4 mix as per REC standards 0 .4cum/pole (8 Mtr )
Cement bottoming 1:2:4 mix as per REC standards 0 .5cum/pole (9 Mtr )
Cement bottoming 1:2:4 mix as per REC standards 0.6cum/pole ( 11 Mtr)
Painting of Poles Red Oxide (2 coat) for 8 mtr ST Pole.
Painting of Poles Red Oxide (2 coat) for 9 mtr ST Pole.
Painting of Poles Aluminium Paint ( 2 coat) for 8 mtr ST pole.
Painting of Poles Aluminium Paint ( 2 coat) for 9 mtr ST Pole.
Sundry items like aluminium lugs, Jumpers,binding Tape etc.
Chainlink Fencing of dimension 6x8ft and height 6ft for Distribution transformer made out of GI wire mesh tied on Iron angles fixed with concrete foundation at the corners
Tri colour Led rope 12mt long
Decorative led lights
Supply/Installation/ testing/commissioning of HT Line
9 Mtr. Long Pole( ST-410 SP33)
GI V cross-arm with top Bracket including clamp (14.631 kg)
GI Channel x-cross including clamps and braces (26 Kg) (Cantiliver type)
50 mm² ACSR Conductor
30 mm² ACSR Conductor
PG Clamps for 30 mm² ACSR Conductor
33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm
33kV Polymeric composite Disc Insulator 36kV,min failing load 70kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm
Galvinized Nuts and Bolts
Danger Plates with Clamps
Anti-Climbing Device with Clamps
Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.
Painting of Poles Red Oxide (2 coat) for 8 mtr ST Pole.
Painting of Poles Red Oxide (2 coat) for 9 mtr ST Pole.
Painting of Poles Aluminium Paint ( 2 coat) for 8 mtr ST pole.
Painting of Poles Aluminium Paint ( 2 coat) for 9 mtr ST Pole.
Cement bottoming 1:2:4 mix as per REC standards .5cum /pole
Aluminium Jointing Sleeves
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Supply/Installation/ testing/commissioning 3-Phase 4-wire LT Line
8 Mtr. Long Pole(PCC WL-200Kg , ST-410 SP15)
Mukhi Clamp with Nuts & Bolts Washers complete set (2.398x84)
GI Channel X ARM (75X40X6mm) 4ft along with GI Clamp, 50x8mm, (4ft=8Kg, 1 No. clamp=0.83Kg = total weight = 8.83 kg)
30 mm² ACSR Conductor
16kN Polymer Shackle Insulators ( With fittings)
Galvinized Nuts and Bolts.
Danger Plates
Anti-Climbing Device with Clamps
Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.
Painting of Poles Red Oxide (2 coat) for 8 mtr ST Pole.
Painting of Poles Aluminium Paint ( 2 coat) for 8 mtr ST pole.
Cement bottoming 1:2:4 mix as per REC standards .45cum/pole
Aluminium Jointing Sleeve
LT Line Spacers
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut- bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
1-phase 2-wire LT Line (Complete as per Annexure L2)
8 Mtr. Long Pole(PCC WL-200Kg , ST-410 SP15)
GI Channel X ARM (75X40X6mm) 2ft along with GI Clamp, 50x8mm, (2ft=4Kg, 1 No. clamp=0.83Kg = total weight = 4.83 kg)
Mukhi Clamp with Nuts & Bolts Washers complete set (2.398x50)
30 mm² ACSR Conductor
16kN Polymer Shackle Insulators ( with fittings)
Galvinized Nuts and Bolts.
Danger Plates
Anti-Climbing Device with Clamps
Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.
Painting of Poles Red Oxide (2 coat) for 8 mtr ST Pole.
Painting of Poles Aluminium Paint ( 2 coat) for 8 mtr ST pole.
Cement bottoming 1:2:4 mix as per REC standards .45cum/pole
Aluminium Jointing Sleeve
LT Line Spacers
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut- bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Tri colour Led rope 12mt long
Decorative led lights
Providing Un Skilled labour for dismentalling/ Loading/ Unloading/ Dragging/Shoulder carrage etc (per day)
Providing Skilled labour for dismentalling/ Loading/ Unloading/ Dragging/Shoulder carrage etc ( Per day)
Shifting/Installation/commissioning of Sub-Station/HT LT Line
Shifting of 25KVA Sub-Station
Shifting of 63KVA Sub-Station
Shifting of 100KVA Sub-Station
Shifting of 200KVA Sub-Station
Shifting of 250KVA Sub-Station
Shifting of 400KVA Sub-Station
Shifting of 630KVA Sub-Station
Shifting of 8Mtr ST Pole with allied material
Shifting of 9Mtr ST Pole with allied material
DRUK ELECTRICALS (BID ID -157143)
M/S CHHEIRPON ENTERPRISES (BID ID -157155)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .