Provn of false ceiling, tiling in bldg No T-121 OR line of 104 AD Regt and certain sanctioned works under GE (East) Fzr Cantt

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards any thickness including cover fillets. Complete all as specified and directed

S & F Anodised aluminium snap grid frame work for false ceiling Complete all as specified and directed

M&L for Providding and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions. Complete all as specified and directed

Dismantling floor ,hearth or wall tiling including cement morter beddind (but not backing removing seviceable tiles to store and rubbish off the premises.Complete all as specified and directed

M&L for Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 400x400x7mm thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles Complete all as specified and directed

All as per Item No-05 hereinbefore but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), Complete all as specified and directed

M & L for brick work with sub class `B' brick straight or curved on plan, exc 6 mtr mean radius built in Cement mortar (1:6) Complete all as specified and directed

Taking down cement plaster or terrazzo from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed

M&L for Rendering/plastering, 15 mm thick in cement mortar (1:4) on brick or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for Preparation of new plastered wall surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed

Preparation of New surfaces of wall and applying Two coats of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed

All as per item No 13 above but size exceeding 1.5 Square metre and not exceeding 4 Square metre each. complete all as specified and directed

Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm complete all as specified and directed

S&F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed

All as per item No 16 above but size 125x60mm with double rebate.complete all as specified and directed

M&L for Cement concrete (1:3:6), type C-1 using 20mm graded crushed crushed stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified and directed

M&L for cement concrete (1:2:4) type B-I using 20mm graded crushed stone agg. As in bed block of hold fast coping incl. necessary form work complete all as specified and directed

M&L for Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of rail and site as per IS1003 (Part- I) kiln and chemically pressure treated, complete all as specified and directed

M&L for Factory made 35 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, kiln and chemically pressure treated, complete all as specified and directed

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019 Sheet 01 to 03 & CEJZ/TD-1020 Sheet 01 to 03

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019 Sheet 01 to 03 & CEJZ/TD-1020 Sheet 01 to 03

S&F Mild steel framed work as in grills/guard bars shouldered with steel window/ ventilator frames kiln and chemically pressure treated, complete all as specified and directed

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm , complete all as specified and directed

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

S&F as in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

S&F Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed

S*F 125mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified and directed

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed

M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces complete all as specified and directed

M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc; over 40 sq. cm in each section, fixed in any position as in framed work complete all as specified and directed

M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates,rivetting, etc., n exc 10 kg each brackets, conforming to FE 290 Gde E-165 complete all as specified and directed

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n. exc. 22.5 cm long complete all as specified and directed

Dismantling asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

S&F Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Pre painted galvatume aluminum zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed.

M&L for Preparation of old decorated surface of wall and applying one coat of oil emulsion distemper complete all as specified and directed

M&L for Preparation of old decorated surface of wall and applying one coat of cement based paint including corneces, pillars etc complete all as specified and directed.

Surface excavation not exc 30 cm deep and avg 15 cm deep and getting out in soft/loose soil.complete all as specified and directed.

M&l 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&l 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor,laid in alternate bays and finished even and smooth with out using extra cement complete all as specified and directed.

M&L Hard core of broken stone or boulders n.exc 63 mm , deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L continuous brick edging with width equal to the width of the brick laid dry on end vertically using old size brick complete all as specified and directed.

M&L forming 12 mm thick expansion joint filled with performed bituminous filler and top 30 mm primed sealed with ceiling compound Gde A for 100 mm thick concrete flooring complete all as specified and directed.

Removal of excavation material n.exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

S&F Steel work in tubular trusse incl. special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240. complete all as specified and directed.

M/L of two coats of synthetic enamel paint over a coat of red oxide on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth when unconnected with other painting or when painted in a different tint.

Excavating in post holes (or similar holes) each n exc 0.5 cu. M, getting out, returning, filling in and raming earth or broken rubble midxed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface soft/loose soil.complete all as specified and directed.

S&F Rolled sections as in main pole and cross beams, hip and jack rafters; purlins whre connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Fe-410-W) ( Gde E -250) quality - B complete all as specified and directed.

S& F Flat angle Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe- 290 Gde- 165.complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed

M&L for GI pipe 50mm dia medium grade for chinup bar pole complete all as specified and directed.

All as per item No 56 above but 32 mm dia dia medium grade for chinup bar beam complete all as specified and directed.

Vee Vee Enterprises

Marwaha Builders

Dee Kay EnterPrises

A N CONSTRUCTION CO

M/S Sandhu Const.Co.

M/s S B Construction Company

M/S Pee Kay Builders