GE/TOKEN-45/2025-26 PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE B/R-I, B/R-II AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for

M&L for PCC( 1:3:6 ) type C-2 using 20mm graded stone as in padding on roof correction of slope and roof kerbs all as specified and directed.

M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed.Note: The application shall be executed on any type of surface and on horizontal/Vertical areas.

M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Notes for item Nos 04: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor within 7 days after opening of Financial Bid. (d) A guarantee amount of 3% of contract of work done for item Nos 04 of BOQ will be retained for 10 years of the completion of work.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Fixing only 15 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs complete all as specified.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Fixing only 20 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs complete all as specified.

Disconnecting existing tanks of cap 1000 ltrs, setting aside (or lower ing if required) for repairs, cleaning, etc. and hoisting if required re- connecting and re-fixing in position and Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.

S & Fin repair 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part II.

Disconnecting existing tanks of cap 500 ltrs, setting aside (or lower ing if required) for repairs, cleaning, etc. and hoisting if required re- connecting and re-fixing in position and Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.

S & F in repair 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part II.

S&F 110mm bore (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed.

S&F Framed mild steel work as in tank stagging , doors or gates of angle or other sections with gusset plates, rails, braces, tank stagging etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and gurders) and hanging also fastening and complete all as specified and directed (Fe-410-W(Gde E-250)Quality-A).

Expanded metal n. exc.4kg/sqm, cut to length,bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic anamel paint over one coat of red oxide Complete all as specified and directed by Engineer-in-Charge.

Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:6, complete all as specified.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping, kerbs or to fix steel posts complete all as specifed and as directed.

Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.

M & L Cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) in foundations, filling and mass concrete as in sub base all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.

M & L for brickwork with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6

M & L 20 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in CM 1:2 all as per specified and directed.

M&L for Surface dressing n exc 15 cm deep and site clearance complete all as specified and directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base all as specified.

M&L for rubber moulded glossy finish Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry laid over 15mm thick screed bed in cm 1:6 as in floors with no pigment complete all as specified and directed.

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.

M&L for coloured glazed ceramic tiles 300x600 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S & F for coloured Non - skid Ceramic tiles 6 to 7 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm ( size 400 mm x 400 mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and as directed.

S&F brass chromium plated tubuler towel rail 20mm dia D type 60cm long between flanges including a pair of CP brass brackets, complete all as specified.

S&F bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified.

S&F Fibre glass reinforced plastic door frames shall be three lagged of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate door frame mouloded with fire retardant grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in al the three lags. The frame shall be covered with fible glass from all sides. MS stay shall be provided at the bottom to steady the frame.

S&F FRP Door shutter shall be 30mm thick glass Fibre Reinforced Plastic (FRP) Pannelled door shutter of required colour and approved brand and manufacturer. Made with fire retardant grade unsaturated polyster resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned woode inside at required places for fixing of fittins, cast monolithically with 5mm thick FRP panels and incl all necessary fittings like hinges, trowel bolt, handle etc confirming to IS 14856-2000.

S&F chromium plated brass stop cock/angle valve fancy type screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified .

S & F wash hand basin vitreous china white glazed flat back, size 550 x 400 mm, including brackets and cutting for and pinning in ends of brackets including waste pipe complete all as directed.

S & F waste fitting 32mm dia brass chromium plated for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, complete all as specified.

S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S&F CP brass shower rose 125mm size suitable for 15mm bore pipe with C P arms complete all as specified.

Supply and fix PVC connection pipe of 15mm size with PTMT check nuts with washers of length 450mm, complete all as specified.

S&F aluminium peg set of 6 peg, 45 centimeter long, complete all as specified.

S & F 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified.

S&F PVC mirror cabinet of size 500X400X120mm fancy type fixed with 4 Nos stain less steel clips complete all as specified.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 20mm graded stone aggregate). Plinth protection laid to a slope of 1 in 24 in alternate basis system. Each bay shall not exceed 3m in length, 12mm wide & 75mm deep joint shall be formed between the bays which shall be filled with Mastic filling to full depth comprising a mixture of 1 part of heator hot blow bitumen 85/25 portion and two parts of heated badrapur sand (by volume) complete all as specified and directed.

S&F in MS Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe -290 Gde E-165 (Brackets over 10 kg each to be measured under ‘Structural Steel')

S&F DWCPE(SN4) 150mm dia (Internal Dia) pipes,snap fit coupler and rubber ring incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

M&L for 15 mm thick in CM 1:4 on new surfaces of concrete or brick surfaces of walls or chajjas or pillars finished even and fair without using extra cement including scaffolding and necessary formwork if required complete all as specified and directed.

M & L for preparation of new plastered surface of wall and jallies and applying two coat of cement based paint over one coat of primer from the same manufacturer including scaffolding if required complete all as specified and directed.

S&F for 100mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F vitreous China urinals, flatback of size 465X355X265 mm white with grating and union for discharge pipe of pvc 60 cm long waste pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (providing and inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mm section window grill as per approved sample and as per IS specifications joining cleat for fixing etc. complete all as specified.

S&F Powder Coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.) complete all as specified. Note: The window shutters shall be double leaf and double shutter/double shutter and single leaf. The rates qouted by contractor deemed to be inclusive of entire completion of work like glass panes 4.00 mm thick and stainless steel wire coth 0.36mm nominal dia of wire average width of aperture 1.40mm complete. Net area to be measured for payment purpose.

M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing and removal of debries out side the MOD Land complete all as specified and as directed by the Engineer-in-Charge.

M&L for 15mm thick rendering in cement mortar 1:6 finished even and smoothe surface without using extra cement on wall in building etc apply two coats of OBD complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified.

S & F in repair brass chromium plated towel ring including a pair of CP brass bracket complete all as specified and directed.

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580mm white with "P"or "S" trap front or back inlet and integral footrest any pattern (excluding flushing cistern and flush pipe) including Provn of concrete bedding complete all as specified and directed.

S&F Roof trusses (framed), truss, framed brackets of angles, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel flat or hollow sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed by Engineer-in-Charge

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as directed.

S&F in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ® comple all as specified and directed.

S&F Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

S&F Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire incl provission of binding wire any size or type complete all as specified and directed.

S&F Mild steel screw bolts (machine made) any dia size with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and directed.

M & L Machine pressed precast concrete rubber moulded interlocking dark coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade all as specified and disposing to debries etc all as directed by Engr-in-Charge.

M&L sand filling under floors or in foundation including watering and consolidation

S&F in Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs.

“S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :- (i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) of size as per site requirement all spd and directed by Engr in charge

S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

S & F 40mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all specified and directed.

S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed.

M&L for dismantling tiles laid dry or pointed of any size and thickness in walls and floors and complete removal of debris outside MOD land complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes of cement plaster 1:6 complete all as specified and directed.

M & L for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) as in sub base all as specified.

M & L for Point wiring (concealed) complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded copper conductor drawn through in and including non metallic medium grade rigid PVC conduit, ISI marked not less than 20 mm dia including all accessories concealed in wall by cutting chases and including provision of 1.5 sqmm PVC insulated unsheathed copper cable FRLS as earth continuty conductor including fabricated branded metal flush box duly make embossed, concealed in walls and with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified and as directed for the followings:-

One light /Ceiling fan/exhaust fan point controlled by one, one way switch .

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

M&L switch Modular type 6 Amps 230V AC complete all as specified.

M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified.

S&F ceiling rose surface PVC/Polycarbonate type with three terminals.

S&F LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2000 systems lumen outputwith lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F on wall 35 Watt High efficient LED Street light fitting including provision of 25 mm dia GI light grade pipe 0.5 meter length bend to shape and necessary clamps and connection with 3 core 0.5 sqmm sheathed copper conductor cable from kisock box to fiitng etc complete as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, with SS braided pipe with adopter for inlet or outlet water connection etc.

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm and making necessary opening in brick wall/window as per site condition complete all as specified and as directed.

S&F MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete Note:-(i) MCB shall be measured & paid separately (ii) make of DBs & MCB should be same

S&F MCB SPN 40 to 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

S&F MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

M&L for Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls all as specified and as directed. Note:- (1) Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length. (2) The damaged surfaces to be made good with plastering will be carried out by contractor and cost of the same deem to be included in the quoted rates. Nothing extra in this account will be admissible.

M&L earthing complete with GI electrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level connected to GI wire 4.0 mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze drilled and screwed all as specified including excavation and earth work and disposal of surplus soil incl 15 mm GI tubing light grade and necessary fitting for protection of GI wire incl laying of alternate layer of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia GI pipe Medium grade for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. Note:- Galvanised wire and protection light grade GI pipe upto 7.5 mtr shall be deemed to be in the rates.

M&L of AC Box consisting power socket including MCB of capacity 25 Amp ‘C’ curve, single phase 240 V, AC including metal enclosure box, including plug top complete all as specified and directed by Engr-in-Charge.

Supply,laying PVC under ground XLPE insulated heavy duty electric cables armoured with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm 2 core laying in trenches, fixed along wall, through GI pipe under floor complete.

Excavation in trenches n.exc 0.45 m wide and n.exc 0.60 m depth for laying of LT cables etc. and getting out in hard/dense soil soil soil complete all as specified

Removal of excavation material not exc 50 Meter and depositing where directed at a level not exc. 1.5 M above the starting point complete all as specified and directed.

S&F for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP Protection of IP-67 having outer dia 50 mm and inner dia of 32 mm with necessary couplers, bends etc for protection of LT cable all as specified and directed.

Schedule of Credit

M/S MSD & Associate (BID ID -3416576)

M/s SAAR ENGINEERS (BID ID -3416574)

m/s VK construction company (BID ID -3408544)

DEEP BUILDER (BID ID -3406348)

ETERNITY PROJECT (BID ID -3409261)