Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.9 LAccepted-AOC FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L1 | Accepted-AOC L1 | |
| 2 | L2₹49.8 L+₹22,653 (0.46%)Rejected-Finance 15 281 CHHILI INT ROAD GHATIYA AZAM KHAN AGRA UTTAR PRADESH 282003 | AGRA | UTTAR PRADESH | 282003 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹70.6 L+₹21.0 L (42.4%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹72.2 L+₹22.7 L (45.8%)Rejected-Finance TRIVANDRUM | L4 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
11 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
CERTAIN REPAIRS TO DAMAGED RCC COLUMN BEAM CHAJJA AND PARAPET WALL IN ZONE A AT OLD NAVY NAGAR UNDER AGE B R I UNDER GE (NW) NAVY NAGAR COLABA MUMBAI
2022_MES_550363_1
8297/CWE (NW) Mumbai/ E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Navy Nagar
Class C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Navy Nagar
₹1.3 L
Yes
9 Nov 2022
6 Sept 2022
13 Oct 2022
6 Sept 2022
11 Oct 2022
27 Sept 2022
6 Sept 2022 - 24 Sept 2022
Amount
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including working platform/scaffolding) complete all as specified and directed by Engineer in Charge.
Material and Labour rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches including working platform/scaffolding) complete all as specified and directed by Engineer in Charge.
All as per item No 2 above but 10mm thick CM 1:3 in ceiling.
Material and Labour Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately)
Supply only water proofing compound ISI marked complete all as specified and directed by Engineer in Charge.
Material and Labour preparation of new undecorated surfaces of walls,soffit, fascias of chajjas etc and applying two coats of rain coat over a coat of primer complete all as per manufacturers instructions complete all as specified and directed by Engineer in Charge.
Material and labour for preparation of old decorated surfaces of walls by any means scrapping old surface washing the surface with Bleaching powder including biowash thoroughly, filling the cracks with cracks filling compound of DR Fixit crack free, chemical of shrink free as per manufacturer instruction & applying two coat of rain coat over a one coat of primer including scaffolding etc all as specified and directed by Engineer-in-charge.
Material and Labour for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer with wall care putty complete all as specified and directed by Engineer in Charge.
Material and Labour applying one coat of oil bound emulsion distemper on old decorated surfaces of wall including preparation of surface complete all as specified and directed by Engineer in Charge.
Material and labour preparation of new or previously un treated surfaces of wall and applying two coat of white wash including necessary arrangement for working platform complete all as specified and directed by Engineer in Charge.
All as per item No 10 above but two coat of white wash on ceiling complete all as specified and directed by Engineer in Charge.
All as per item No 10 above but one coat on ceiling complete all as specified and directed by Engineer in Charge.
Material and Labour for preparing newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of primer and a coat of wall care putty complete all as specified and directed by Engineer in Charge.
Complete removal of existing treatment of wall by washing, rubbing down complete all as specified and directed by Engineer in Charge.
Material and Labour for one coat of synthetic enamel paint on old decorated wooden surface exc 10cm width or girth including preparation and necessary arrangement for working platform complete all as specified and directed by Engineer in Charge.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer in Charge.
Material and Labour Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 complete all as specified and directed by Engineer in Charge.
Material & Labour for drilling and fixing Rohibb teflon in RCC members, including drilling holes of 12 mm dia , 50 to 100 mm deep holes in structural member at the interval of 500mm c/c in staggered manner or as directed by Engr In Charge in RCC structural element. Work shall be carried out as under :- (a) Cleaning of holes - cleaning the holes by air blower prior to fixing nozzles (b) Fixing of nozzles - Insert 12 mm dia Rohibb teflon nozzle in cleaned holes. External end of nozzles to be machine to recieve outlet of grouting gun. Fix it in side the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for 12 hrs (c) cutting of nozzles - Cut the nozzle by chisel after completion of grouting without damaging structural element complete all as specified and as directed by Engg-In- Charge
Material & Labour for injecting of site cement slurry grout in the ration 1:2 ( 1- Cement 2- Water ) including supper plasticiser (Super com -100) 250 ml/50 kg. Mixing shall be done mechanical mixer continously stirring mechnically to keep cement particle in suspension Injection of approved/specified grout by means of pump at a pressure of 0.5 Kg /cm sq etc complete till the grout mix flows out out from the nozzle indicating complete filling of grout in the holes drilled (for repair to wall and slab) complete all as specified and directed by Engg-In- Charge
Material & Labour for injecting viscosity MONOPOL (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzle refused to accept the grout, including mixing of material component ( part A & B) in the required qty as per manufactures instruction by weight batching. Grouting maintain the presssure at exit (0.5 to 1 1.kg/cm2) by monitering pressure guage at exit . Grout at material through prefixed nozzle in the structural element @ 100 ml per nozzle. Repeat the process for all nozzle (Columns and beam) complete all as specified and directed by Engg-In- Charge (Work shall be carried out upto 9 storey Bldg)
Material & Labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the premises etc complete as directed by Engr-in-charge. Hard concrete should not be removed by force (Work shall be carried out upto 9 storey Bldg)
Material & Labour for Building up the profile of structrual members by using latex additives (MONOBOND) modified air cured mortar system (Polymer modified mortar) (1-5-15) = 1 monobond 5 cement 15 sand ) in damaged areas in 30 mm thickness including leveling profiling etc complete) all as specified and directed by Engg-In- Charge (Work shall be carried out upto 9 storey Bldg)
Material & Labour for carry out application of Bi Polar migratory corrosion inhabitor EPCO KP _ 100 Protectssil CIT/Ferogard 903 on concrete surface (this inhabitor shall have migratory kind of property which permit the material to migrate to a vertural extend of 100 mm , through pores of concrete inhabbting the corroser and depassivating the elctro chemical reaction it should have property to attack anode as well as cathode which is purely alkaline in nature (Ph 9.5) so it has no carcinogen activities with concrete complete all as specified and as directed by Engg-In- Charge
Material & Labour for cleaning existing reinforcement with wire/rotary wire brush, making the surface free from loose material dirt etc, complete applying two coats of alkaline rust converting primer (i.e. rust remover) FEOVERT conforming to ASTM-B-117, on the rebars including cleaning the reinforcement , wire brushing to remove loose rust spalls with time interval 6 hrs between the coats and applying protective coating (IPNET - RB c complete all as specified and directed by Engineer in Charge.
Material & Labour for providing and applying two coats of anti-rust protective coating in the form of Acrylic Polymer mixed with Cement in 1:1.5 proportion (1 part polymer and 1.5 parts Cement) on rebars after cleaning of rust scales as per manufacturers instruction (measurement on the basis of exposed concrete area). (Make : IPNET of Krishna Conchem, New Coat from Dr Fixit ) complete all as specified and directed by Engineer in Charge.
Material & Labour for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster or micro concreting conforming ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bonding between old concrete and new concrete complete all as specified and directed by Engg-In- Charge
Material & Labour for providing and applying jacketting around columns/beams with micro concrete (Molith-MC) M-40 including all lifts, shuttering , drilling holes and fixing shear anchor complete all as specified and directed by Engineer in Charge. (Note : (a) Reinforcement shall be measured and paid seprately) Rates including jacketing form work and micro concrete complete all as specified and directed by Engg-In- Charge
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engineer in Charge.
Use and wase of formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engineer in Charge.
Use and wase of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed by Engineer in Charge.
Material & Labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engg-In- Charge
All as per item No 31 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer in Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer in Charge.
Supply and Fixing Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming including working platform/scaffolding) conforming to Fe 290 Gde E 165 complete all as specified and directed by Engineer in Charge.
Supply and Fixing Framed brackets of angles or tee with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary gusset plates, riveting etc nexc each 10Kg bracket confirming to Fe 290 Gde E 165 including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge.
Supply and Fixing rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafter and running rails etc complete conforming to Fe-410- W(Gde?E-250) quality?B including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge.
Material and labour Steel work in tubular railing including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including working platform/scaffolding) complete all as specified and directed by Engineer in Charge.
Supply and Fixing 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete all as specified and directed by Engineer in Charge.
Material & Labour for preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer in Charge.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer in Charge.
Material and Labour pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) complete all as specified and directed by Engineer in Charge.
Material and Labour pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) complete all as specified and directed by Engineer in Charge.
Demolition of concrete of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc. removing the debris from MoD land complete all as specified and directed by Engineer in Charge..
Material and Labour for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors complete all as specified and directed by Engineer in Charge. (Note : WPC shall be measured and paid seperately)
Material and Labour cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor 150mm thick complete all as specified and directed by Engineer in Charge.
Material and Labour RCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for stairways (except spiral staircases) including steps (square or spandril), etc., complete, any section straight or winding complete all as specified and directed by Engineer in Charge.
Material and Labour 32 mm galvanised tubing medium grade as in spout pipe each 50 cm long, cutting to shape as required, cutting through wall of any thickness, fixing in PCC 1:2:4 tpe B-1 making good the damaged portion by rendering in CM (1:4) and finished the surface to match the existing surface complete all as specified upto 4 storey complete all as specified and directed by Engineer in Charge..
Supply and Fixing 100mm bore CI floor nahani trap with gratings incl jointing to waste pipe in run lead complete all as specified and directed by Engineer in Charge.
Supply and Fixing 100mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement with gratings incl jointing to waste pipe in run lead complete all as specified and directed by Engineer in Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer in Charge.
Material and Labour Non - skid coloured ceramic tiles 7 to 8 mm thick of size area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors over and including 20 mm thick screed bed in cement mortar 1:6 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match (Note : Cost of 20 mm thick screed bed and epoxy grouting is included in the rate). complete all as specified and directed by Engineer in Charge.
Material and Labour glazed ceramic tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry over and including 15 mm thick cement plaster in cment mortar 1:4 and pointed in white or colour cement to match (Note : The rates include the cost of 15 mm thick plastering ) complete all as specified and directed by Engineer in Charge.
Material and Labour Non - skid coloured ceramic tiles of size 600mm x 600mm x 7 to 8 mm thick in floors over and including 20 mm thick screed bed in cement mortar 1:6 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match (Note : Cost of 20 mm thick screed bed and epoxy grouting is included in the rate). complete all as specified and directed by Engineer in Charge.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer in Charge.
Material and labour for Granite(of any type) 18-20mm thick slab laid on floor machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over 15 mm thick screed bed in cement mortar (1:6) including grinding & polishing complete all as specified and directed by Engineer in Charge.
All as per item No 55 above but on wall skirting /dado over 15 mm thick Cement mortar (1:4) complete all as specified and directed by Engineer in Charge.
Material and Labour udaipur green/baroda green marble slab 18-20 mm thick over similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding and polishing complete (Note : The rates included the cost of cement screed bed 10 mm thick) complete all as specified and directed by Engineer in Charge.
Material and Labour machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed) complete all as specified and directed by Engineer in Charge.
Material and Labour machine cut pre-polished kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer in Charge. (Note: The rate includes the cost of cement plaster )
Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer in Charge.
Extra for forming grooves over granite or kota stone slab as in staircase complete all as specified and directed by Engineer in Charge.
Material and Labour in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding complete all as specified and directed by Engineer in Charge.
Supply and Fixing in repair 4 mm thick plain sheet glass ordinary qualityand glazing with aluminium and neoprene beads in sqr not exc 0.50 sqm in each pane complete all as specified and directed by Engineer in Charge.
Disconnecting existing water tanks, exc 500 but n exc 1000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as directed by Engr in Charge (cleaing/repairing measured separately)
Disconnecting existing water tanks, exc 1000 ltrs but n. Exc 2000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as directed by Engr in Charge (cleaing/repairing measured separately)
Removal of existing water proofing treatment of the roof, cleaning with wire brushes etc including demolition of PCC padding of any description and in any position complete all as specified and directed by Engineer in Charge.
Material and Labour for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) mixed with Shali Plast LW+ of STP/Pidilite URP of Dr. Fixit or Equivalent and appoved as per manufactures instruction. Before laying concrete surface shall be cleaned and a bond coat of slurry with Shali Crete URP (of STP) or equivalent with cement to be applied. Alll cracks in slab to be openend in 'V' groove and filled with Shali Fix RMC a Polymer Morter of STP/ equivalent complete all as specified and directed by Engineer in Charge.
Material and Labour for 20mm thick rendering in CM 1:4 with the addition of Shaliplast LW+ @ 200ml per bag of cement on fair faces of brick or concrete surfaces complete all as specified and directed by Engineer in Charge.
Providing roof treatment as under :- (a) Applying bitumenous primer @ 0.30 litres per sqm over cleaned and dry roof surface including parapet (b) Material and Labour for applying a coat of blown bitumen 85/25 grade @ 1.20 kg per sqm over priming coat of roof . (c) Providing and laying 4mm thick APP modified polyester reinforced water proofing memberane with minimum weight of 3.5 Kg/Sqm , as spefieid. The APP membrane shall be laid using torch-on application with minimum 10 cm side overla and 15 CM end overlapl. The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. (d) Providing polypropylene/polyester, non-woven geotextile fabric of 150 gsm
Material and Labour cement concrete tiles 25cm x 25cm x 18 to 20mm thick, machine pressed; set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:4 over APP membrane at roof, and cut and polished complete all as specified and directed by Engineer in Charge.
Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia upto 20 mtr height all as required . (Including necessary scaffolding and safety equipments) complete all as specified and directed by Engineer in Charge.
Supply and Fixing CI soil/ waste/ vent pipe in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls upto 20 mtr height all as required . (Including necessary scaffolding and safety equipments) complete all as specified and directed by Engineer in Charge.
Supply and Fixing cast iron sand cast pipes , of 75 mm dia in any length fixed with flat iron clamp complete on walls upto 20 mtr height all as required . (Including necessary scaffolding and safty equipments) complete all as specified and directed by Engineer in Charge.
Supply and Fixing CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls complete all as specified and directed by Engineer in Charge.
Supply and Fixing CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) with parallel branches for 100mm bore pipe complete all as specified and directed by Engineer in Charge.
Supply and Fixing Bends or Tee (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 75 mm dia complete all as specified and directed by Engineer in Charge.
Supply and Fixing Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted without oval access doors of bore 75 mm complete all as specified and directed by Engineer in Charge
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) including necessary working platform (scaffoldings) and safety measurs complete all as specified and directed by Engineer in Charge.
Supply and Fixing 150mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and fixed to walls including necessary working platform (scaffoldings) and safety measurs complete all as specified and directed by Engineer in Charge.
Supply and Fixing in repair PVC bends of 150mm dia complete all as specified and directed by Engineer in Charge.
Supply and fixing PVC (SWR) 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 25 x 1.5 mm FL incl all fittings like sockets, bend, junction, elbow etc. complete all as specified and directed by Engineer in Charge.
Supply and Fixing in repair PVC bends of 110mm dia complete all as specified and directed by Engineer in Charge.
Grubbing up and uprooting of trees / plants from external walls of bldgs pouring muratic acid for burning residual roots if any. Racking out the dead roots from plants / concrete joints upto its penetrated portion and filling with PCC (1:2:4) 12.5 mm graded aggregate and finishing the surface with 15mm rendering in CM (1:4) including necessary hanging arrangement complete all as specified and directed by Engineer in Charge.
Material and Labour for Writing letters of figures (Block,Roman,Italic, or Indian) exc 60 cm but not exc 90 cm high using two coats of Acrylic paint exterior grade (100%) acrylic over a coat of primer including preparation of surfaces of walls etc specified on external surfaces. (letter writing shall be done at isolated locations at height not more than 10 m above Ground level) complete all as specified and directed by Engineer in Charge.
Garima Construction Co
SHREE JAGDISH FURNITURE CO.
Vandan Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .