REPAIR/MAINT OF STREET LIGHTS AND CONNECTED WORK AT ITARANA CANTT AND CITY AREA UNDER GE ALWAR

Amount

Disconnecting and taking down the street light fitting from the pole and repair of street light fitting of any type, capacity & make by replacement of unserviceable spare parts & making the fitting functional and refixing after repairs all as specified and directed by Engineer-in-Charge.

Disconnecting and taking down High Mast light from the steel tower and repair of High Mast fitting of any type, capacity & make by replacement of spare parts & making the fitting functional and refixing after repairs all as specified and directed by Engineer-in-Charge. Note for item No. 1 & 2 : (i) Spare parts/accessories required to be replace shall be measured and paid seperately as "supply only" under the relevent items. (ii) Scope of work including for minor stores ie. PVC insulation tap, screw, insulation sleeve, nut bolt & washer and flexible cable 2.5 sq mm. (iii) Any complaint measured one time in same location/pole/light during contract period. No extra payment will be made for repeating complaint on same location during contract period. (iv) Contractor shall be depute daily two Nos mistry/electrician in MES office (MRS) for receiving and rectify the complaint. (v) The rate including all the T&P of i.e. ladder/vehicle/required for execution of work shall be arrange by the contractor.

Supply only for repairs surge protection device (SPD) for LED street light fitting (45-60) watt. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs BIS registered potted electronic driver suitable for LED street light fitting (45-60) watt. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs surge protection device (SPD) for LED street light fitting (72-90) watt. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs BIS registered potted electronic driver suitable for LED street light fitting (72-90) watt. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs surge protection device (SPD) for LED street light fitting (100-150) watt. Make : Bajaj/Philips/Shakti/CG/Polycab.

Supply only for repairs BIS registered potted electronic driver suitable for LED street light fitting (100-150) watt. Make : Bajaj/Philips/Shakti/CG/Polycab.

S&F in repair for 2.5 sqmm, PVC insulated, Round Sheathed, twin core alluminium Conductor (flexible) industrial cable, 1100 Volts, conforming to IS: 694, from street light feeder/junction box to street light fittings Make : Havells / Finolex / Polycab

S&F in repair for 2.5 sqmm, PVC insulated and FRLS PVC Round Sheathed, twin core Copper Conductor (flexible) industrial cable, 1100 Volts, conforming to IS: 694, from street light feeder/junction box to street light fittings Make : Havells / Finolex / Polycab

S&F in repair for 6 sqmm PVC insulated & sheathed single core copper conductor cable repair for street light feeder panel /junction box/re-wiring fitting-fixtures etc. Make : Havells / Finolex / Polycab

M&L in repairs for rigid steel conduit, welded of 20 mm dia for protection of wire fixing on pole as required with 2 Nos clamps complete all as specified and directed by Engr-in-Charge.

S&F in repairs street light bracket made to shape at required angle made out of 40 mm dia ( light grade ) GI tubing of length not less than 1.2m long suitable for fixing /holding street light fittings including mild steel flate iron 50 x 6 mm clamp 02 Nos with bolts, nuts and washer complete all as specified & directed.

S&F in repairs decorative gate light/garden light made up of high grade unbreakable (MUSHROOM PRISMATIC) polycarbonate material including 10/12W LED Lamp B22 base including taking down of old U/S light. Make: Havells/Crompton/Bajaj

S&F in repair for pole mounted juction box made out of one piece moulded SMC IP65 protection having aluminium bus bars 100 Amp single phase and neutral with one No MCB SPN 6 Amp for street light, cable entry from bottom, maintenance free size 300x200x100 mm fixing on pole with MS flat 25x3mm clamp including nut bolts front openable all as specified and directed.

Replacement of old unsv & Supply, Installation, commissioning and testing of Lithium based energy integrated solar street light 40 Watt in single metal/FRP body encases solar panel 44/46Wp monocrystalline, Lithium ferro phosphate battery, solar panel and charger built into the luminaire 11.1/12.8V, 42AH with inbuilt BMS, High brightness W-LED (160-180 lm/watt) lamp, CRI>0, Colour temperature 6500K, microcontrollerbased charge controller cum driver, automatic dimming function with PIR motion senor, Dusk to down operation, working temperature: (-) 10C to (+) 55C, weight: 10-12 kg, with adjustable MS clamp, bracket suitable for pole/wall mounting, Pprotaction: Short circuit, overload, Reverse polarity and battery protections complete all as specified. NOTE- (i) Firm should give warranty for the complete fitting including all Electric/Electronics connected parts for minimum 5 years. (ii) The complete documents regarding warranty shall be handed over to the GE at the time of execution of the items. In turn contractor may obtain. Warranty/ Extended warranty from the manufacturer for the above period. Make : Philips/Havells/Bajaj or its equivallent approved by the GE.

Repairs to Street light panels and Nature switch by replacement of unserviceable electric items such as Timer, contactor, MCB, MCCB, busbar etc wiring of suitable size copper conductor cable single core etc and setting of timer including dismantling of unserviceable parts. Note : Spare parts measured and paid seperately under the relevent item as "Supply only"

Supply& fixing in repairs MCB SP 6 to 32 Amps , 230 Volts, AC complete. Make : Havells/HPL/C&S.

Supply only electric contactor 3 pole suitable for (25-40) Amps 240 Volts AC complete. Make : L&T/ Siemens/C&S/BCH.

Supply only Astronomical time switch Digital type for street light 240 volts , 50 Hz complete. Cat pt No. T2DDT8 Make : L&T/ Havells/C&S.

M&L for painting of APFC/LT/SL panel board of any sizes with one coats of synthetic enamel paint smoke grey including preperation of old painted surfaces by scrapping of old surface and making good surface all as specified and directed by Engineer-in-charge.

M&L for earthing in repairs complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m deep below normal ground level and connected to and including galvanized iron strip 25x4 mm as earth lead by means of GI nuts, bolts, check nuts, washers thimbles, etc. as shown in electrical plate No. 3 of SSR Part-I and connection to main switch board/test point/panel/equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus soil to a distance not exc. 50m, charcoal and salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm bore for watering and 40 mm bore 3m long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shallb e provided o CI frame etc.complete all as specified & as directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 40 mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

S&F in repairs steel tubular swaged pole 09 meter long type 410 SP-31 with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.20 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint over a coat of aluminium red oxide primer to remaining portion of pole and marking pole number and including dismantling and taking down old unserviceable PCC pole of any size/height & type including earth work incl demolition of PCC all as specified & as directed. Make : NTC, India Tube co, Bombay Tube, Jindal steel product. Note : (i) Excavation & earthwork, PCC in foundation & coping shall be measured and paid for separately. (ii) Serviceable street light fitting and pole mounted junction box taking out from us pole and same refixing the new pole.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Make : Havells/Grandlay/Polycab. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

All as per serial item No 26.00 here-in-before but of cross sectional area 6 sqmm 2 core.

Excavation in trenches n. exc. 1.5Mtr width n.exc 1.5 Mtr in depth for laying of cables & foundation of poles, stay assembly and getting cut in any type of soil.

M & L for sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note :- Thickness after punning shall be considered for payment.

M/L for brick work with FLY ASH BRICKS as Per IS-13757(1993) burnt clay fly ash building bricks, with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

Returning, filling in including spreading levelling , watering and well ramming in layers not exc. 25cm in any type soil complete all as specified & directed.

Removing of surplus excavated soil to a distance not exc. 50m and depositing where directed at a levelnot exc 1.5 Mtr abovethe starting point complete all as specified & directed.

M&L for Galvanized iron tubing, 40mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, or fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete all as specified and directed.

Boring of holes under road,pavement, hard standing by trench less technology using ultra sound technique and necessary machine including HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure.

S&F in repairs LED street light fitting 100 watt 230V AC for all weather conditions with excellent thermal management, made with pressure die cast housing with toughened glass and high power LED'S with secondary optics and IP66 protection efficiency of 110/120 lumen per watt along with 10kv surge protection device including all fixing accessories complete. Make : Crompton RAPTOR NEO Cat No- TRP-411-100-57-SL-GL-NSG /Havells/Bajaj

All as per item ser No. 35.00 here-in-before but of cap 120 Watt. Make : Crompton RAPTOR NEO Cat No- TRP-411-120-57-SL-GL-NSG /Havells/Bajaj

S&F in repairs LED flood light 150 Watt 230 volt AC outdoor type made up of pressure die cast aluminium housing with integrated IP lens and SMD LEDs with IP-66 protection with efficiency 120 lumens per watt alongwith 10kv SPD including all fixing accessories complete. Make : Crompton SPECTACLE Cat No- TFS-510-150-57-60D-HL2-LM-NGG /Havells/Bajaj

All as per item ser No. 37.00 here-in-before but of cap 200 Watt. Make : Crompton SPECTACLE Cat No- TFS-511-200-57-60D-HL2-LM-NGG /Havells/Bajaj

S&F repairs post top lantern LED type 20 watt 230V AC outdoor type IP-65 protection corrosion resistant complete with driver and lamp complete. Make : Crompton-Cat No-LPTH-20-CDL/Havells/Bajaj.

M&L for flexible steel spring pipe, 25 mm dia for protection of wire fixing on pole as required complete all as specified and directed by Engr-in-Charge.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for in this Schedule complete all as specified.

M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation of stay assembly & poles and similar works complete all as specified. Note : Volume of pole/strut embedded in concrete shall be deducted for the purpose of payment.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in mass concrete for pole all as directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B2 using 20 mm graded stone aggregate in coping concrete for pole all as directed by Engineer-in-Charge.

M&L for painting to PCC LT pole 9 metre long of any size with two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.2 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint over cross arms, brackets, bracings, clamps, hooks etc and marking pole numbers including preparation of old surfaces for painting complete all as specifiedand directed.

M&L for painting to steel tubular LT pole 9 metre long of any size with two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.2 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint to remaining portion of steel pole, over cross arms, brackets, bracings, clamps, hooks etc and marking pole numbers including preparation of old surfaces for painting complete all as specified and directed.

S&F in replacement LED Chip for street light fitting 60/90 W any make & taking out old LED chip.

MCB ,TPN ,63 Amps,415 Volts & taking out old U/S MCB,TPN, 63 Amp,16KA,415 Volts-01 No

MCB SPN 32 to 63 Amp,230 Volts,AC & taking out old U/S MCB SPN 32 to 63A

Indicating lamp R,Y,B set of three & taking out old U/S lamp set.

Digital Timer switch 110-240 VAC, 50/60HZ tolerance -20% to +10% contact 16 A(NO) & 5A (NC) @ 240 VAC/24 VDC model digital crono times setting by date and position coordinates . Cat No. 67DDTO & taking out old U/S Timer switch any type make- L&T ,Cat No. 67DDTO

Supply and fixing MCCB, 4 Pole, 415 Volts -50HZ , Magnetic fix type 25 to 63 Amps,16 KA capacity including dismantling of unservieable MCCBs.

Supply and fixing MCCB, 4 Pole, 415 Volts -50HZ , Magnetic fix type 100 Amps, 16 KA capacity including dismantling of unservieable MCCBs.

Supply and fixing Globe shaped light for Existing garden light in frosted finish made up of Polycarbonate suitable for LED 9/10 watt all as specified and directed & taking out old U/S Globe.

S&F gate light of Globe shaped post top lantern with LED Bulb in frosted finish made out of polycarbonate including suitable for upto 27w retrofit LED including taking down of old U/S globe.Make Havells ,model No LHDC13126099

S & F Garden light BAMBOO Type fitting LED 9 W including LED lamp and necessary PCC work/FI nuts, bolts for mounting the fitting complete all as directed by Engineer-in-Charge including taking down U/S light any type any size . Make : Havells Cat No. LHEVBDP71N6K008

S&F MCCB ,4 pole ,250 Amps. Rating rupturing capacity 36 KA ,415 Volts grade AC,50Hz ,with adjustable thermal ,magnetic release and making connections ,including disconnecting and taking down old U/S MCCB ,complete all as specified and directed.

S&F MCCB ,4 pole ,160 Amps. Rating rupturing capacity 36 KA ,415 Volts grade AC,50Hz ,with adjustable thermal ,magnetic release and making connections ,including disconnecting and taking down old U/S MCCB ,complete all as specified and directed.

Supply,installation,commissioning and testing of high intensity type LED based street light of 90 watt rating new generation energy generation and environmental friendly long life versatile pressure die cast aluminium IP-65/66 roadway luminaire with high power LED as light source complete with all fittings,No of lens -02, 10000 > lumens and prewired and as directed & specified.Make-Syska model No- SSK-SLR-90W or equivalent model Havells/shakti/C&S

Supply,installation,commissioning and testing of high intensity type LED based street light of 25 watt rating new generation energy generation and environmental friendly long life versatile pressure die cast aluminium IP-65/66 roadway luminaire with high power LED as light source complete with all fittings and prewired , 2100 > lumens and as directed & specified.

Supply, installation, commisioning and testing of Flood Lights 240W,Energy saving,eniveronmental friendly,long life,exclusive innovative die-cast aluminium non integral IP 66 flood light,suitable for high mast application,highlighting architectural facade and general purpose lighting including external control gear box of Make : Havells Model No JETAVALOURFLS240WLED757MODSYMLTG and equilavant Make Philips/C&S/Crompton Greaves and all as specified and directed by Engineer-in-Charge

Supply Installation Testing and Commissioning in replacement of Lithium based Solar LED Security light System with built in Battery and PV Panel and LED lamp in FRP/Aluminium body including taking down of old unserviceable light fitting of any size/capacity complete. System Comprises Followings”:- 1. 1. PV Panel 30W Monocrystalline. 2. Lithium Cell for back up 15.4AH with inbuilt BMS. 3. High brightness W-LED lamp 16W, CRI>700, CCT6500K. 4. Microcontroller based charge controller cum driver with automatic dimming function, Dusk to Dawn Operation. 5. Working temperature: (-) 10°C to (+) 55°C. System should be supplied with adjustable MS clamp and 40mm dia arm suitable for pole/wall mounting complete with satisfaction of Engineer In Charge.

Supply and fixing of 45 watt Inverter LED Street Light with IR Sensor for automatic On-Off of street light and shall have inbuilt Li-on battery for 90mins power backup in case of power failure. Housing of fixture shall be presurre die cast and system efficacy >100LPW, CRI >70, CCT 5700K, PF>0.9, THD<15%. Make: Halonix Cat. Ref. HLSLD-ML04-45-CWL-INV-DIMM-IRSEN-R or equivalent

Hitesh Construction (BID ID -3364062)

M/s Yash Electrical and Maintenance (BID ID -3356528)

M/S GAURI CONSTRUCTION (BID ID -3352503)

M/S Naglot Enterprises (BID ID -3354571)

Shiv Enterprises (BID ID -3356307)