REPAIR MAINT OF CORRODED RAISING MAIN DISTRIBUTION CIGI PIPE LINE AND PUMP MOTORS PANEL AND CONNECTED ACCESSORISES AT PRATAP NAGAR AREA SMQ AREA BOSAN STOREAREAAND NSBAREA AND RAJENDRANAGAR AREA 16 LT CDR QTRS 14 LT QTRS VIRAT VIKRANT AT INS SHIVAJI

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed

Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed

Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.

Taking up or down GI Tubing and connections including cleaning for refixing or removal to store - of size :- 15 mm dia

20 mm dia

25 mm dia

40 mm dia

50 mm dia

Refixing old GI Tubing and connection in New or old position (walls, Ceiling, Floors etc) of size :- 15 mm dia

20 mm dia

25 mm dia

40 mm dia

Supply and laying GI tubing medium grade with all fittings and fixed complete laid in trenches or on wall/Ceiling of size :- 15 mm dia

20 mm dia

25 mm dia

40 mm dia

50 mm dia

Supply and fix in replacement Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of size :- 20 mm dia

25 mm dia

40 mm dia

50 mm dia

Supply & fix rubber gasket joint for flange end of following size : 200 mm dia

150 mm dia

100 mm dia

80 mm dia

Supply & fix mechanical joint/Coller ISI marked for spigot end pipe of following size : 300 mm

Supply and laid spigot and socketed CI /DI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size upto 150mm dia.

Supply and laid spigot and socketed CI /DI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size 200mm to 300mm dia.

Dismantling/taking out unserviceable sluice valve of size 80mm to 300mm bore dia by opening/cutting rusted nuts, bolts etc all as specified and directed.

Supply and fix of CI Rising Spindle sluice valve Make-Kriloskar valve both ends flanged and drilled. Hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed of sizes :- 80mm

Fabricate,supply & fix stainless steel spindle and nut suitable for following dia sluice valve complete with stainless steel nut and threding as per sample & directed by engr-in- charge for 300 mm sluice valve

for 250 mm sluice valve

for 200 mm sluice valve

for 150 mm sluice valve

M & L for disconnecting carefully and dismantling the pump set from motor unit and opening complete pump set, cleaning replacing of unserviceable parts such as gun metal bushes, rubber packing, MS Nut, Bolts, rubber coupling (spider), Air valve and worn out parts etc and reassembling, re-installing commissioning and testing for satisfactory running complete all as specified and as directed for following capacity of pumps :- Note :- Spare parts replaced shall be measured and paid separately as "Supply only" Centrifugal pump set of 50 HP capacity.

Centrifugal pump set of 30 HP capacity.

Centrifugal pump set of 25 HP capacity.

Centrifugal pump set of 60 HP capacity.

Centrifugal pump set of 5 HP capacity.

Submersible pump set of 5 HP capacity

M & L for overhauling of motor unit, 3 phase, 415 volts by dismantling and opening completely, cleaning internal parts thoroughly, replacing unserviceable minor parts like nut bolts, washers, terminal plate, cable lugs, greasing including insulating materials, varnishing, heating, reassembling reinstalling and testing complete all as specified and as directed for the following capacity of motor :- Note:- Unit rate quoted shall be deemed to include for minor unserviceable parts as mentioned/ required for repairs. All other major spares as specified hereinafter will be measured and paid separately as "Supply only". Centrifugal pump set of 50 HP capacity.

Centrifugal pump set of 30 HP capacity.

Centrifugal pump set of 25 HP capacity.

Centrifugal pump set of 60 HP capacity.

Centrifugal pump set of 5 HP capacity.

Submersible pump set of 5 HP capacity

M & L for rewinding electric motor by dismantling from cable connection pump set and foundation, dismantling complete motor removing all parts thoroughly removing burnt copper wire with new one and rewinding motor 3 phase 415 with same gauge, same No of turns of super enamel copper wire including E class insulating material, varnishing, heating etc re-installing and testing etc complete all as directed by Engr-in-Charge for the following capacity:- Note :- Unit rate quoted shall be deemed to include for minor unserviceable parts as mentioned/ required for repairs. All other major spares as specified hereinafter will be measured and paid separately as "Supply only". Centrifugal pump set of 50 HP capacity.

Centrifugal pump set of 30 HP capacity.

Centrifugal pump set of 25 HP capacity.

Centrifugal pump set of 60 HP capacity.

Centrifugal pump set of 5 HP capacity.

Submersible pump set of 5 HP capacity

Supply only brass impeller set suitable for following capacity centrifugal pump set . For 60 HP Capacity

For 30 HP Capacity

For 25 HP Capacity

S& F in replacement push button for motor complete all as specified and as directed.

S & F in replacement indicator with bulb and cover for panel board complete all as specified and as directed.

Supply only pump shaft suitable for centrifugal/ monoblock pump set for following capacity of motors :- For 50 HP to 30 HP Capacity

For 25 HP to 10 HP Capacity

Supply only ball bearing suitable for centrifugal pump set of following capacity of pump set:- For 60 HP Capacity

For 30 HP Capacity

For 25 HP Capacity

For 5 HP Capacity

Supply only bush for main shaft drive suitable for pump set of following capacity :- Centrifugal pump set of 60 HP capacity.

Centrifugal pump set of 30 HP capacity.

Centrifugal pump set of 25 HP capacity.

Centrifugal pump set of 5 HP capacity.

S&F in replacement 3 Phase, Volt meter, 0 to 500 Volt, complete all as specified and as directed.

S&F in replacement Ameter meter, 0 to 150 Amps with CT coil of ratio 5/50 complete all as specified and as directed.

Cutting of road /hard standing for laying /dismantling of pipe line and making good surfaces matching with the existing surface after laying of pipe line.up to 30 cm

Area clearance/levelling/excavation /digging at MES installations at any width and length by using JCB complete all as directed by Engineer-in-Charge. Note 1. The cost of POL includedin quotated rates . 2. After Start and finsh of the work ,Hrs slips shall be provided by the contrcator 3. LOG Sheet shall be maintained.

M & L for rectification of water lekage pipe line upto 15-50 mm size bore including necessary excavation ,joints,pipes etc all as specified and directed by Engr-in-Charge

pk Enterprises (BID ID -3136311)

Darpan Construction (BID ID -3136526)

seema enterprises (BID ID -3136709)

SHAILENDRA B TULSANI (BID ID -3136581)

United Engineers and Contractors (BID ID -3135938)

shakti engineering and electrical works (BID ID -3136235)