Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC FRIENDS COLONY STREET A DHANGU ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹25.0 L+₹1.9 L (8.15%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹25.7 L+₹2.6 L (11.2%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | Rejected-Technical | - | Rejected-Technical Not recomended NO remark in WLR of CEWC Qtr ending mar 2024 |
Tender Value
₹23.2 L
EMD Value
₹46,500
Closing Date
12 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Pathankot
GE (AF) Pathankot
PROVN OF 01 x VOCATIONAL LAB AT KV NO 1 SCHOOL AT AIR FORCE STATION PATHANKOT
2024_MES_659943_1
8423/GE/PAF-09/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Pathankot
₹46,500
Yes
23 Oct 2024
14 Jun 2024
19 Jul 2024
14 Jun 2024
12 Jul 2024
28 Jun 2024
Amount
Material and labour for Surface dressing in loose / soft soil n exc 15 cm deep complete all as specified and directed by Engr-in-charge.
Excavating in trenches, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed by Engr-in-charge.
Excavating in trenches, for depth exc. 1.5m deep (additional depth beyond first 1.5m depth) for foundation etc., or for shafts, weels, pits etc. n. exc 10 Sqm on plan and getting out in any type of soil complete all as specified and directed by Engr-in-charge.
Material and labour for Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.
Material and labour for Anti Termite Treatment by treating and sides bottom of excavation at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specified and directed by Engr-in-charge.
Material and labour for Anti Termite Treatment by treating the backfill in contact with foundation at the rate of 7.5 ltrs emulsion per sqm of surface area complete all as specified and directed by Engr-in-charge.
Material and labour for Anti Termite Treatment by treating the top surface of filled earth at the rate of 5 ltrs emulsion per sqm of surface area complete all as specified and directed by Engr-in-charge.
Material and labour for Anti Termite Treatment by treating the soil under plinth protection at the rate of 5 Ltrs of emulsion per Sqm of surface area complete all as specified and directed by Engr-in-charge.
Material and labour for Plain Cement Concrete Type B-2 1:2:4 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.
Material and labour for Formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed by Engr-in-charge.
Material and labour for Formwork to sides of square or rectangular pillars, posts, struts, columns etc complete all as specified and directed by Engr-in-charge.
Material and labour for Formwork to sides and soffits of floor or roof beams,, splays between floor and beams etc complete all as specified and directed by Engr-in-charge.
Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-charge.
Material and labour for Formwork to edges of concrete flats , window cills, floor and roofs n exc 20cm wide complete all as specified and directed by Engr-in-charge.
Material and labour TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders,cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.
Material and labour TMT bars 10mm dia and over cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified & directed by Engineer-in- charge.
Material and labour for Reinforce cement concrete M-25 Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-charge.
Material and labour for Reinforce cement concrete M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.
Material and labour for RCC M-25 as in beams, cantilevers etc complete all as specified and directed by Engr-in-charge.
Material and labour for RCC M-25 as in columns, pillars etc complete all as specified and directed by Engr-in-charge.
Material and labour for 25mm thick Damp proof course in cement concrete 1:2:4 , type B-0, to horizontal or vertical surfaces including necessary formwork complete all as specified and directed by Engr-in-charge.
Material and labour for brick work with old size sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and directed by Engr-in-charge.
Material and labour for brick work with old size sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius,in one brick thick honey comb walling built in CM 1:6, complete all as specified and directed by Engr-in-charge.
Material and labour Rendering 10mm thick on fair faces of concrete surfaces in cm 1:3 to be finished even and smooth (without using extra cement) complete all as specified and directed by Engr-in-charge.
Material and labour Rendering 10mm thick on fair faces of brick work or concrete surfaces in cm 1:6 on internal surfacesto be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge.
Material and labour Rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 on external surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge.
Material and labour Rendering 5mm thick on fair faces of brick work or concrete surfaces in cm 1:3 on ceiling, chajjah soffit to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge.
Material and labour for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection 75mm thick finished even and fair including making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed by Engr-in-charge.
Material and labour for broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-charge.
Material and labour for preparation of newly plaster surfaces of walls and applying 2mm thick wall care putty, complete all as specified and directed by Engr-in-charge.
Material and labour for preparation of newly plaster surfaces of walls and applying two coats of exterior weather coat Acraylic emulsion paint paint, complete all as specified and directed by Engr-in-charge.
Material and labour for preparation of newly plaster surfaces of ceiling and applying three coats of white wash over ceiling, complete all as specified and directed by Engr-in-charge.
Material and labour for preparation of newly plaster surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed by Engr-in-charge.
Material and labour 75 mm thick P.C.C 1:4:8 type D2 (using 40 mm graded aggregate) as in sub base of flooring complete all as specified and directed by Engr-in-charge.
Material and labour for Machine cut mirror polished kota stone slab of size 550m X550mm for flooring 20-25mm thick including 100mm wide border of marble/granite around the internal perimeter of lab, of pattern as approved, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 20 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-charge.
Machine cut kota stone slab flooring mirror poloished16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-charge.
Material and labour for glazed ceramic coloured in different colour combination as approved by GE ,450x300x7mm thick on vertical surfaces such as skirting, dados and riser to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl rendering 10mm thick in CM (1:4) on brick or concrete surface complete all as specified and directed by Engr-in-charge.
Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed by Engr-in-charge.
Removing excavated materials( soil) obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.
S&F for powder coated( min. thickness of power coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-charge.
Supply and fixing Anodised aluminium ( minimum thickness of power coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engr-in-charge.
Supply and fixing Anodised aluminium grill ( anodised transparent of dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15 ) of approved design/ pattern with approved standard section and fixed to existing window frame with CP brass/ SS screws @ 200mm C/C , incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodises Aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-charge.
Material and labour for preparation of surface by scrapping and properly cleaning the surface to remove loose particles with wire brushes and other tools, complete in all respect , along with (a) apply first coat of fibre reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibres with sun reflectivity index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 MPa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure , reduce surface temperature upto 10 degree celsius with 33% dilution as primming coat. (b) laying of fibre mesh of 0.3mm thickness weave in leno pattern having weight 45 gm/Sqm and pasting it properly with overlap of 50mm and allow it to dry. (c) Apply second undiluted coat @ 0.450 ltr/Sqm (d) Apply third and final coat undiluted @ 0.450Ltr/Sqm as directed by Engr-in-charge. Note : Application of water proofing treatment will be done Authorised applicator only/ or in presence of authorised rep. Certificate in this regard shall be submitted to Engr-in-charge.
Material and labour for rolled mild steel as in Framed work ( Fe -290 ( Gde E- 165)) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-charge.
Providing and fixing factory made single extruded WPC solid decorative type flush door shutters of size 35mm thick comprising of virgin polymer of K value 58-60 ( suspension grade), calcium carbonate and natural fibres ( wood powder/rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N ( face) & 900N ( edge), minimum compressive strength 50N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardnat . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary fulll body threaded star headed counter sunk SS screws , all as per directions of Engr-in-charge.( Note: stainless steel butt hinges and necessary SS screws shall be paid seperately).
Supply and fixing 300mm long Aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed by Engr-in-charge.
Supply and fixing anodised aluminium barral tower bolt extruded section 150 mm size complete all as specified and directed by Engr-in-charge.
Supply and fixing anodised aluminium handle cast type 125 mm size complete all as specified and directed by Engr-in-charge.
Supply and fixing for Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed by Engr-in-charge.
Supply and fixing 140mm long floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor including vulcanised rubber complete all as specified and directed by Engr-in-charge.
Supply and fixing 20 mm bore stainless steel curtain rod with 1 mm thick wall thickness including a pair of brackets and knobs with each length/ piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed by Engr-in-charge.
Supply and fixing 5.5mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-charge.
Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified and directed by Engr-in-charge.
Supply and fixing 15 mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified and directed by Engr-in-charge.
Supply and fixing 20 mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified and directed by Engr-in-charge.
Supply and fixing for Vitreous China wash basin, white, flat back, size 580x450 mm (Hospital/ lab use)including brackets, 32 mm bore CP waste pipe long screw thread and 32 mm dia flexible waste pipe incl fixing of taps complete all as specified and directed by Engr-in-charge.
Material and labour for 15mm dia of pipe Brass CP with long swan neck of rotating neck type ,mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
Supply and fixing Stop valve concealed type cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed by Engr-in-charge.
Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-charge.
Supply and fixing for CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed by Engr-in-charge.
Supply and fixing for Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-charge.
Supply and fixing for 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed by Engr-in-charge.
Supply and fixing in rep Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20 mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) fixed in reapirs complete all as specified and directed by Engr-in-charge.
Supply only Liquid Water proofing compound complete all as specified and directed by Engr-in-charge.
Supply & fixing for HDPE DWC ( double wall corrugated ) pipes confirming to IS - 16098 of 152 mm & 180 mm internal & external dia respectively . Presure rating SN-8 fixed with rubber seal and copler required with and including suitable bends 90/60/45 degree etc single Y junction complete as required fixed as per manufacture instruction laid in trenches for sewage line all as specified and directed . NOTE rates included for pipes , bends any size , types Y junctions copler/ adptor etc required and net total length of pipe with fittings shall be measured for payment purpose complete all as specified and directed by Engr-in-charge.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified & directed by Engr-in-Charge.
Material and labour for sand filling under floors including watering and consolidation complete all as specified and directed by Engr-in-charge.
Material and labour for 60 mm thick Machine pressed coloured precast cement concrete interlocking paver block any shape and sizs as directed, confirming to IS 15658-2006, M-35 Grade as in floor etc. set and jointed with gray cement and pigment complete all as specified and directed by Engr-in-Charge.
Cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in kerbs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge.
Supply and fixing for factory made 25mm thick solid WPC(wood particle composit) sheet one side prelam sheet (of pattern as approved by GE)and other side wood nature colour for cupboard shutter of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level etc completion all as specified and directed by Engr-in-charge.
Supply and fixing for factory made single extruded WPC (wood polymer Composite) solid door/window/Ceosetory windows and other frames/chowkhat of size 45 X 70mm comprising of virgin PVC polymer of K value 58-60(suspension grade), calcium carbonate and natural fibres( wood powder/ rice husk/wheat husk) and non toxicc additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and and screwed with full body threaded star headed SS screws having minimum frame density 750 Kg/cum, screw withdrawal strength of 2200N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900N/mm2and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length completion all as specified and directed by Engr-in-charge.
Supply and fixing in repair factory made 18/19 mm thick solid WPC(wood particle composit) without prelam sheet having both side wood nature colour for cupboard partitions/slabs of density 600 kg /Cbm bent 90° incl 100% termite/water proof, fire rertradent, Eco friendly, completion all as specified and directed by Engr-in-charge.
Material and labour for 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour completion all as specified and directed by Engr-in-charge.
Supply and fixing for continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm completion all as specified and directed by Engr-in-charge.
Hasp and staple of size 125 mm, safety type, aluminium anodised with hinge pin incl bolt to hinge plate and fixed with screw completion all as specified and directed by Engr-in-charge.
Material and labour Granite work 16mm to 18mm thick (table rubbed and polished)as in platforms, counter for Wash hand basin, treads, riser or landing of stair hall, cill of floor and windows and like over cement mortar (1:4) screed bed 20mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black incl cutting for fittings, fixtures and incl rounding to edges completion all as specified and directed by Engr-in-charge.
Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with sunken type pressed steel terninal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light point controlled by one switch.
All as per Ser item No 77 above here in before but One 3 pin switch socket outlet point 5 Amps on same board complete all as specified and directed by Engr-in-charge.
All as per Ser item No 77 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm sizecomplete all as specified and directed by Engr-in-charge.
Material and labour for Switch piano flush type single pole, one way 5 Amps 230 Volts AC circuit complete all as specified & directed by Engr-in-Charge.
Supply and fixing switch piano flush type,15 Amps, Single pole, two way complete all as specified and directed by Engr-in-charge.
Material and labour for for socket outlet 5 Amps, 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.
Material and labour for for socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.
Supply and fixing ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed by Engr-in-charge.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.
Supply and fix exhaust fan made of sturdy Engineering plastic Complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed by Engr-in-charge.
Supply and fixing ceiling fans complete with blades down rods electronic reguator and accessories 230 V, 1200 mm star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-charge.
Sub main wiring complete with two runs of 2.5 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories ,fixed to walls / roofs / floors etc., with one run of 2.5 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring including accessories complete all as specified and directed by Engr-in-charge.
Excavation in trencehes not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for laying of pipes etc and getting out in soft/loose soil, complete all as specified and directed by Engr-in-charge.
Supply and fixing for GI Tube 25 mm medium grade with all fitting and fixtured laid in trenches complete all as specified and directed by Engr-in-charge.
Supply and fixing for gun metal gate valve 25 mm dia with iron head wheel screwed both ends for iron pipe, fixed in repairs with ISI mark complete all as specified and directed by Engr-in-charge.
Cutting existing cast iron water main pipe line 40/50 mm bore in position for making branch connection (insertion of Tee) including fitting or excavation and earth work complete all as specified and directed by Engr-in-charge.
All as per Ser item No 92 above here in before but 50mm bore complete all as specified and directed by Engr-in-charge.
All as per Ser item No 92 above here in before but 20mm bore complete all as specified and directed by Engr-in-charge.
Sand cushioning to the under ground electric cable complete all as specified considering 19.75 of SSR part -I
Material and labour for Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed by Engr-in-charge.
Material and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. Mm, 3.5 Core complete all as specified and directed by engr-in-charge.
Supply and lay GI tube light grade with all fitting and fixed complete to walls and ceiling or laid in floors of size 40 mm dia complete all as specified and directed by Engr-in-charge.
Material and labour for cutting of bituminous road/floor for laying of pipe /cables not exceeding 1.5 meter wide aand not exceeding 1.5 meter deep including refilling/with material and watering well ramming /compacting and making good with PCC 1:2:4 type B-1 100mm thick complete all as specified and directed by ENgr-in-Charge.
Supply and fixing LED street light fitting 35 watt 230 V AC outdoor type with high pressure die case aluminium hosing and heat resistant complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-charge.
Supply and fixing MCB DB VTPN 4 ways with metal double door, IP -43 protection suitable with MCCB 63A as incommer and MCB as out going, 415 volt 3 phase complete with appropriate size copper bus bar and neutral link complete including cutting chases to wall for fixing of DB and making good distrubed wall/surfrace as all required at site i.e directed by ENgr-in-Charge.
Supply and fixing for MCB single pole (SP) 240 volt 06/32 amp for inductive load connected through cable lugs of suitable size complete all as specified and directed by Engr-in-charge.
Supply and fixing MCB double pole (DP) 240 volt 06/32 amp for inductive load connected through cable lugs of suitable size complete all as specified and directed by Engr-in-charge.
Earthing complete with galvanised steel earth plate electrode 0x60 cm thick, buried directly in ground (earth pit not less than 2.5 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level, conneted to galvanised earth lead wire 32 x 6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr-in-charge.
PARVINDER BHARDWAJ (BID ID -3059212)
JAGDISH SINGH ASSOCIATES (BID ID -3059287)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .