Construction of PHC (N) Building at Dengapadara under Sheragada Block in the District of Ganjam for the year 2024-25.

Earth work in excavation of foundation in all kinds of soil with initial lead and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, cess and T&P and dewatering if required for the work etc. Complete as directed by the Engineer-in charge

Ground Floor

Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, Additional charges, DMF @ 10% & EMF @ 5% over the royality, Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge.

Ground Floor

Cement Concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hosting lowering and laying concrete in layers not exceeding 15cm thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalty, Additional charges, DMF @ 10% & EMF @ 5% over the royality and all labour, cess with T&P required for the work etc. complete including dewatering if required as per direction of the EIC.

Ground Floor

Cement Concrete of proportion (1:2:4) in using 12mm size crusher broken granite chips of approved quality from approved quarry including hoisting, lowering & leveling in position to required level including frame work where necessary ramming and leveling curing dewatering with cost, conveyance, taxes, royalty, Additional charges, DMF @ 10% & EMF @ 5% over the royality Cess, labour of all materilas and including hire & running charges of machineries T&P required for the work as per the specification and direction of Engineer-in-charge.

Ground Floor

RCC of design mix of M-25 grade of controlled qulity having cube strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 16/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 10 mm. to 20mm. sizes & proportion as specified in clause-302.6.2 of IRC 21/1987, IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved

quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering & shuttering & form works finishing the exposed surface smooth providing beads & grooves, fan hooks wherever necessary including cost, conveyance royalties, Additional charges, DMF @ 10% & EMF @ 5% over the royality Cess and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works)

Column Base & Footing (Ground Floor)

Column (Ground Floor)

Column (Head Room)

Plinth Beam (Ground Floor)

Lintel (Ground Floor)

Chajja (Ground Floor)

Roof Slab (Ground Floor)

Roof Slab (Head Room)

Staircase

Roof Beam

Supply of HYSD bars confirming to approved grade cutting bending , binding, lapping, splicing, welding etc. (conforming to ISI specification ) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance, Cess of tor steel & binding wires of 18 to 20 gauge ( as approved by the Deptt. ) etc. complete (Weight of binding wire shall not be considered for payment at all which will be bome by the contractor (standard CO-efficient of different size of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC - 21/1987) as per direction of the Engineer in charge.

Ground Floor

Head Room

Flyash brick masonary in cement mortar (1:6) in foundation and plinth and Superstructure floor bed plinth molding and similar such types of works with all necessary projections using flyash bricks of (25 cm x 12 cm x 8 cm) size having crushing strength not less than 75Kg. Per Sqcm. Including splays cutting, circular moulding, chamfering corbelling watering curing for 14 days after immersing the bricks in water for six hours before use etc. complete including cost, conveyance, royality, Additional charges, DMF @ 10% & EMF @ 5% over the royality taxes, Cess of all materials and labour with T&P required for the work etc complete in all respect as per direction of the Engineer in charge.

Ground Floor

In Foundation

In Superstructure

Head Room

2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm and downgraded hard granite crusher broken chips on new work after chipping and chiseling the same and cleaning surface by wire brushing laid to proper slope finsihed smooth to receive tarfelt tratment watering and curing including cost and conveyance of all materials and labour with T&P and cess required for the work with all taxes and royalties, additional charges, DMF 10% & EMF 5% over royalty etc, complete in all respect in all floors as per direction of Engineer-in-charge.

Ground Floor

Head Room

6mm thick cement plaster (1:4) to ceilling and R.C.C. surfaces finished smooth including closed deep chipping & slury treatment including cost,coveyance,royalities DMF (10% over royalty), EMF (5% over royalty), Addl Charges, of all materials etc all complete as per direction of the Engineer in charge.

Ground Floor

16mm (5/8”) thick cement Plaster (1:6) finished smooth to inside surface of bricks walls/ stone masonary after racking out joints including watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, Additional charges, DMF @ 10% & EMF @ 5% over the royality etc. complete in all respect in all floors as per direction of the Engineer in charge.

Ground Floor

Head Room

12mm (1/2”) thick cement plaster (1:6) finished smooth to out side brick walls after cracking out of the joint including, watering and curing with cost and conveyance of all materials and labour, cess with T&P required for the work with all taxes and royalties, Additional charges, DMF @ 10% & EMF @ 5% over the royality etc. complete in all respect in all floors as per direction of the Engineer in charge.

Ground Floor

Head Room

Finishing wall surface of walls with cement based wall putty one coat (Water based) of approved make and finished smooth and even surface to receive painting including cost conveyance and taxes of all materials and labour with T&P and Cess required for the work etc, complete in all respect as per the direction of Engineer-in-Charge.

Ground Floor

Wall priming One coat with wall cement primer water bound including cost, conveyance, taxes of all materials required for the work with all labour, T&P, Cess etc complete in all respect as per specification and direction of Engineer-in-Charge

Ground Floor

Head Room

Finishing wall surface with two coats of approved quality of weather coat of approved shade including cost,conveyance, royalities, taxes, cess of all materials, labour, T&P etc.Complete as per direction of Engineer-in-Charge

Ground Floor

Head Room

Painting two coats over a coat of primer with any approved enamel paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge.

Ground Floor

Head Room

Wall painting two coats with plastic Emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge.

Ground Floor

Head Room

Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials labour, Cess, Royalities, Additional charges, DMF @ 10% & EMF @ 5% over the royality and T&P and cess etc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge.

Ground Floor

Supplying,fitting & fixing vetrified tile in dadoos of size 600mm x 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 12mm & filling joints with epoxy grout of approved quality including cost of all materials labour, Cess, Royalities, Additional charges, DMF @ 10% & EMF @ 5% over the royality and T&P and cess etc, required for the work etc, complete in all respect as per specification and direction of Engineer-in-charge.

Ground Floor

Head Room

Providing and laying CERAMIC wall tiles of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles.( Kajoria/Jhonson/Somany)

Ground Floor

Supplying fitting and fixing of Stain less steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr c/c and stain less square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge

Supplying, fitting and fixing vitrified industrial floor tile 30x30cm premium grade 8 to 10 mm thick in floors of approved make confirming to IS : 4457 laid on 20mm thick C.M. (1:4) & filling joints with white cement of approved quality including cost, conveyance, royalties, taxes of all materials & labour T&P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. Make Johnson / Kajaria / Rak / Ceramic or equivalent

Ground Floor

Providing, fitting and fixing of 8 mm to 12 mm thick Antiskid vitrified tile of size (300 x 1200mm) of printed series confirming to IS specification having minimum breaking strength 1400 kg / Sq.cm in flooring in all floors at all heights on 20mm thick bed of C.M. (1:4) to proper sloope, line and level in cluding to required size and shape, fixing at corners and spalys etc including filling joints with silicon sealant to match the shade of vetrified tile as per the design and drawing including cost, conveyance, royalties, taxes of all materials & labour T&P and cess required for the work etc, complete in all respect as directed by Engineer-In-Charge. Make Johnson / Kajaria / Rak / Ceramic or equivalent

Ground Floor

Head Room

Supplying and fitting fixing of Un-plastricised poly Vinyle Chloride (UPVC) (FENESTA/NCL VEKA LTD) Ventilator Top Hung 60 series duly manufactured using UPVC reinforced profile PVC reinforced profile of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25 mm for casement window sash profile capable of mounting single glazing system structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefebricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear thoughened glass of SAINT GOBAIN make duly fixed with EPDM wheathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes in system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials accessories labour charges materials and product conforming to ASDM D 638-14-EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge.

Ground Floor

Supplying and fitting fixing of Un-plasticised poly Vinyle Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track - Three Panel Sliding Window Casement window with top fixed 60 series duly manufactured using UPVC reinforced profile PVC reinforced profile of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.25mm capable of mounting single glazing system, structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefebricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear thoughened glass of SAINT GOBAIN make duly fixed with EPDM wheathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials accessories labour charges materials and product conforming to ASDMD 638-14/EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge.

Ground Floor

Supplying and fitting fixing of Un-plasticised poly Vinyle Chloride (UPVC) (FENESTA/NCL VEKA LTD) Door Casement door with top fixed 60 series duly manufactured using UPVC reinforced profile PVC reinforced profile of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm x 2.25mm capable of mounting single glazing system, structually reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefebricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear thoughened glass of SAINT GOBAIN make duly fixed with EPDM wheathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing / dglazing at site etc includinjg cost and conveyance of all materials accessories labour charges materials and product conforming to ASDMD 638-14/EN-477-95 and other applicable codes and standards etc as per direction of the Engineer in Charge.

Ground Floor

Supplying,fitting and fixing of M.S. Window / Door grill and collapsabe gate made out of M.S. flat conforming to IS 2062/2006 painted with Red Oxide Primer as per design including cost of all materials with cost of conveyance, taxes, Cess etc. including labour as per direction of Engineer-in-Charge.

Ground Floor

Head Room

DISMANTLING

Dismantling brick or stone masonry in lime or cement mortar under 3M (10’-0”) height including stacking the useful materials for reuse and removing the derbies within 50m lead away from the work site including cost of all labour with T & P,CESS required for the work as per direction of Engineer-in-Charge.

Dismantling and removing old damaged R.C.C. columns, beams, slab, staircase, landing lintels including stacking the useful materials for reuse and removing the debris within 50M lead away from work site including cost of all labour with T & P & CESS required for the work as per direction of Engineer-in-Charge.

Dismentaling and removing cement concrete including stacking the useful materials for reuse and removing the debris with in 50mtr lead including cost of all labour with T&P,Cess required for the work etc complete as per direction of Engineer-in-Charge.

Dismantling and removing old damaged R.C.C. chajja, shelves, fins & parapet including stacking the useful materials for reuse and removing the debris within 50M lead away from work site including cost of all labour with T & P & CESS required for the work as per direction of Engineer-in-Charge.

Dismantling and removing old damaged tiled flooring including removing the base course & stacking the useful materials for reuse and removing the debris within 50M lead away from work site including cost of all labour with T & P & CESS required for the work as per direction of Engineer-in-Charge.

Dismantling and removing doors & windows and ventilators including removal of frames, hinges fastening, stacking the same for reuse and removing the debris with in 50m lead with cost of all labour, T&P & CESS etc. complete as per direction of Engineer-in-Charge.

PH WORKS

External SI & WS

30 User Septic Tank

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.

Initial lift upto 1.5 mtr 4.36 m x 3.17 m x 1.50 m=20.731 cum

From 1.5 mtr to 3.0 mtr depth 4.36 m x 3.17 m x 0.70 m=9.674 cum

Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.4.36 m x 3.17 m x 0.15 m=2.073 cum

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.4.36 m x 3.17 m x 0.15 m=2.073 cum

Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 4.36 m x 3.17 m x 0.10 m=1.382 cum + 3.12 m x 1.93 m x 0.038 m = 0.228 Cum

Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

In Foundation and Plinth in C:M (1:4) 2 x ( 4.06 + 1.93 ) m x 0.47 m x 1.10 m = 6.193 cum + 2 x ( 3.82 + 1.93 ) m x 0.35 m x 0.80 m = 3.220 cum

In Foundation and Plinth in C:M (1:6) 1 x 0.40 m x 0.40 m x 0.60 m = 0.096 cum

Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 12 mm thick C.P in C:M (1:3) 2 x ( 3.12 + 1.93 ) m x 1.90 m =19.19 sqm + 3.12 x 1.93 m = 6.021 sqm + 4 x 0.40 x 0.60 m = 0.96 sqm

Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. Same as above item 20mm C.P in 1:3

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.2 x (3.82 + 2.63 ) m x 0.125 m =1.612 sqm + 3.12 x 1.93 m = 6.021 sqm

Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.3.82 m x 2.63 m x 0.125 m

Supplying all materials, labour, T&P and making M.S. Step Iron in 8mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.2.2 m x 0.45 m

Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the Engineer-in-charge. 2 x ( 4.06 + 2.87 ) m x 1.10 m = 15.246 Sqm + 2 x ( 3.82 + 2.63 ) m x 0.80 m = 10.32 Sqm + 2 x ( 4.06 + 2.63 ) m x 0.125 m = 1.672 Sqm

Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C.

110mm diameter U-PVC SWR pipes

110mm U-PVC SWR P-trap

110mm U-PVC SWR single junction door

110mm U-PVC SWR door bend

110mm U-PVC SWR Offset

110mm U-PVC SWR plain bend

110mm U-PVC SWR vent cowl

75 mm diameter U-PVC SWR pipes

75mm U-PVC SWR door bend

75 mm U-PVC SWR plain bend

125 mm dia C.P Grating

Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.

160 mm dia PVC Pipe all round

Supplying all materials, labour, T&P and providing, laying soakway gallary with SW/PVC pipes, jointing lead loose packed allround with stone boulders 50mm to 150mm other than granite, covered at top with a layer of flat tiles 300mmx300mmx25mm including earthwork in excavation of trenches in all kinds of soil to an average depth of 1.5 mtr, covering of earth at the gallary top etc. all complete as per approved drawing and direction of the E.I.C. 160 mm dia PVC gallary

Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90 m dia x 2.00 m deep Soakway pit

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. 0.90 m diax 2.0 m deep soakway pit

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2000 lits capacity on the roof of G. floor

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 2000 lits capacity on the roof of G.floor

Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. 1x50x0.45x0.45m=10.125

Supplying all materials, labour ,T&P and laying in trenches HDPE of the following nominal bore and pipe fittings including testing etc all complete as per direction of the E.I.C. 32mm dia HDPE pipes

Supplying and fitting & fixing of I.S.I make 2.00 H.P single phase Submersible Pump set to give discharge of 3000 ltr/hour at a head of 40 mtr etc all complete as direction of EIC.

Supplying all labour,T&P and fitting & fixing of I.S.I make 2.00 H.P single phase Submersible Pump set with commissioning and testing etc all complete as direction of EIC.

Supplying and fitting & fixing of D.O.L starter for1.50/ 2.0 H.P single phase Submersible Pump etc all complete as per direction of Engineer-in-charge.

Supplying and fitting & fixing of suitable cable and connecting the pump and starter etc all complete as per direction of Engineer-in-charge.

Supplying and fitting & fixing of Plastic rope, M.S well cover, M.S clamp, etc all complete as per direction of Engineer-in-charge.

Supplying and fitting & fixing of HDPE pipes and pipe fittings with C.P Nippling and lowering to bore well, making connection to pumpset & testing etc all complete as per specification and the direction of the E.I.C.32 mm dia HDPE Pipe

BORE WELL (200MM X 150 MM DIA)

Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell)

Drilling of 200mm dia bore :-00 mtr to 30.00 mtr

Drilling of 150mm dia bore :-30.01 mtr to 80.00 mtr

Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above.

Lowering of 200 mm dia PVC pipes :- 00mtr to 30.00 mtr

Cost of 200 mm dia PVC pipes :- 00mtr to 30.30 mtr

Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.

Internal SI & SD

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. G.F 1x1.20x1.95m = 2.34 sqm + 1x1.20x3.04m = 3.648 sqm + 1x3.04x4.57m = 13.892 sqm + 3x0.75mx0.30 m = 0.675sqm - (-1)x 0.58m x 0.44m=0.255

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C. G.F 1x5.74mx2.10m =12.05 sqm + 1 x7.88m x 2.10m = 16.548 sqm + 1 x14.62m x 2.10m = 30.70 sqm + 1x 8.0m x 0.90m= 7.20 sqm

Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.580mm size Orissa pan(Hindware,Parryware)

Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap(Hindware,Parryware,Cera) to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) etc all complete as per specification and direction of the E.I.C. Anglo Indian water closet(E.W.C) with 'P' trap plain

Supplying all materials, labour, T&P and fixing of plastic seat cover for E.W.C with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C.

supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.

375 mm thick wall

250 mm thick wall

supplying all materials, labour, T&P and cutting grooves in pucca Floors, and walls for taking G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:3:6) including finishing with 12mm C.P (1:3) complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I. pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.

15mm dia C-PVC pipes

20mm dia C-PVC pipes

25mm dia C-PVC pipes

32mm dia C-PVC pipes

Supplying all materials, labour T&P and fitting and fixing of C.P Shower(Jaquar Make) with 15mm or 20mm inlet with C.P Shower arm including polishing etc all complete as per specification and direction of the E.I.C

15 mm x 150mm dia C.P Shower with arm

15 mm dia C.P Health Faucet ( Jaquar Make )

Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings(Jaquar Make) of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.

15mm dia CP Bib Cock

15mm dia CP long body Bib Cock

15mm dia CP Bib Cock with long nose elbow action

15mm dia CP Two way angle/Bib Cock

15 mm dia CP Angle cock

15mm dia CP Concealed Stop Cock

15mm dia CP Pillar Cock

15mm dia CP nipple

15mm dia CP Flange

25mm dia Metal Full Way Valve

Supplying all materials, labour T&P and fixing wash basins(Hindware,Parryware,Cera) with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.

550mmx400mm W.H.basin

Counter top basin 560 x 455

Supplying all materials, labour, T&P and fixing pedestrial for wash hand basin complete recessed at the back for the reception of pipes and fittings etc all complete as per specification and direction of the E.I.C. Porcelain Pedestal

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.Mirror with plastic moulded frame

Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C

20mmx450mm long CP towel rail

CP towel ring

Supplying all materials, labour, T&P and fixing Stainless Steel kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages fixing PVC waste pipe of 32mm nominal diameter including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. stainless steel kitchen sink(450x 400x200mm)

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.CCP soap holder

Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. 5 x 0.72m x 1.95m= 7.02 sqmt

Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern(Hindware,Parryware,Cera) with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C 10 lit PVC L/L Cistern

ELECTRICAL WORKS

Wiring

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )

do- Group A

-do- Group B

-do- Group C

Recessed wiring to Fan Point in...

-do- Group B

-do- Group C

Recessed wiring to Call Bell Point in...

-do- Group C

Recessed wiring to Exhaust Fan Point in…..

-do- Group C

S/F of Angle holder replacing Ceilling Rose (1.29-1.28)

S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.

Switch Boards

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with Modular cover

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.

4 Modular box with base & cover

6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Sub-Main

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

Circuit Breakers & BDB

S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)

Supply and fixing of 63A four pole (triple pole and neutral) 410 V residual current break (RCCB) having a sensitivity current up to 300 milli ampere in the existing MCB DB ISI marked complete with connection testing and commissioning etc as required.

S/F of 4 way (4+12) TPN MCB DB Single door (2.5.1)

Earthing

Supply & laying 8 SWG Cu wire in recess for loop earthing as required (3.18)

S/L of 25mm x 5mm Cu. earth strip in 40 mm dia G.I.Pipe(3.11)

Item No.4. EARTHING-Provision of maintenance free Chemical Earthing with 250 micron non corrosive copper bonded rod (CPRI Certified) of 2.4 mtr length and minimum 17.2 mm dia with provision of 25kg x 2=50kg back filling ground resistance improvement compound with ROHS certified including supply and installation of heavy duty envionmental friendly poly plastic earth pit chamber with cover as per I.E Rules .The earthing should be minimum 1.5 mtr. away from the building and the two earthings must be 10 feet apart from each other as per I.E Rules .

Fittings

S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB)

S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)

S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC)

S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- HS /Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)

Fixing /I.T.C. of stepped type Modular regulator (1.25a)

S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells )

S/F of 9w Watt LED Bulb(Panasonic/Orient)

S/F of 12W LeD Squre (10"×10") LSDSMN-12W-WW with surface Panel rings (Havels / crompton / philips / panasonic)

S/F of 18W LeD Squre (12"×12") LSDSMN-12W-WW with surface Panel rings (Havels / crompton / philips / panasonic)

Panels

Supply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make- Legrand/Seimens/L&T/C&S/) & 100A kitkat & bus bar 2. 32 A TPN MCB (Make- Legrand/Seimens/L&T/C&S/)- 2nos 3. 32A DP MCB (Make- Legrand/Seimens/L&T/C&S/)- 5 nos 4. 100 A 4P Manual changeover (Make- Legrand / Seimens / L&T/C&S/)- 1nos 5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad)

Please Enable Macros to View BoQ information