Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹5.2 LAccepted-AOC 88 GIRRAJ NAGAR KALWAD ROAD JOTHWARA JAIPUR 302012 JAIPUR CITY NORTH RAJASTHAN 302012 | JAIPUR | RAJASTHAN | 302012 | L-1 | Accepted-AOC Tender accepted due to lowest tenderer | |
| 2 | L-2₹5.6 L+₹26,790 (5.06%)Rejected-Finance | L-2 | Rejected-Finance Not being L1 | |
| 3 | L-3₹5.9 L+₹62,090 (11.7%)Rejected-Finance | L-3 | Rejected-Finance Not being L1 | |
| 4 | L-4₹6.0 L+₹74,364 (14.1%)Rejected-Finance | L-4 | Rejected-Finance Not being L1 |
Tender Value
₹10.0 L
EMD Value
₹20,000
Closing Date
8 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Niwaru
AGE (I) Niwaru
AGE(I) N-18 OF 2023-24 REPAIR AND MAINT OF WINTER APPLIANCES AND CONNECTED ITEMS AT NIWARU MIL STN UNDER AGE (I) NIWARU
2023_MES_594980_1
AGE(I)/N-18 of 2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
AGE (I) Niwaru
CLASS E
6 documents required · 6 mandatory
₹500
Yes
AGE (I) Niwaru
₹20,000
Yes
28 Jun 2023
12 May 2023
10 Jun 2023
12 May 2023
8 Jun 2023
26 May 2023
Amount
Geyser Taking down carefully after disconnecting electrical/water supply connections and transporting to the work shop to carry out the servicing / over hauling of the storage type electric water heaters (Geysers) of storage capacity 25 litres of any make / type by cleaing the inner surface of the tank / heating element with chemical to remove the scaling / rust & reassembling the same , required brazing/soldering refixing on its original position including reconnecting only testing, Complete all as specified and directed by Engr-in-charge.
S&F in repair of heating assembly with its base plate circular in shape including rubber washer / nuts/ bolts/ packing material, heating element of capacity 2 KW (ISI marked) as per existing make of geyser -Venus model no. 25GVM/2015 etc , Complete all as specified and directed by Engr-in-charge. Make: kawai 230 volt, 2000 watt 1503 VenusVenus/ Bajaj /Theeta/Swarna or eqivalent ISI marked Note- item supplied will be as per existing and as directed by engineer in charge
S&F in repair of Capillary thermostat with relay/ switch (15Amp 250 Volts) with inbuilt nobe for temp variation as per existing sample suitable for 25 litres capacity Geysers, Complete all as specified and directed by Engr-in-charge.
S&F in repair of thermal-cutout with heating sensor rod (capillary type) relay/contactor (model T100 20Amp 250 Volts) as per existing sample suitable for 25 litres capacity Geysers, Complete all as specified and directed by Engr-in-charge.
S&F in repair of neon indicator lamp round or rectangular type (ISI marked) , Complete all as specified and directed by Engr-in-charge.
S&F in repair Pressure release safety valve for Geysers spring loaded suitable for 15mm pipe chromium plated (ISI marked), Complete all as specified and directed by Engr-in-charge.
Supply and fix in repair flexible copper wire PVC insulated, 3 core, 2.5 Sqmm dia multistranded, Complete all as specified and directed by Engr-in-charge.
M&L for replacement of old U/S Chromium plated stainless steel pipe connection for cold water inlet/ hot water outlet pipe of size 15mm dia complete with nipple/adaptors 450mm long (ISI marked), Complete all as specified and directed by Engr-in-charge.
M&L for replacement of old U/S PVC connection pipe threaded type for cold water inlet/ hot water outlet pipe of size 15mm dia complete with nipple/adaptors 450mm long (ISI marked) make- prayag/polytuf, Complete all as specified and directed by Engr-in-charge.
Solar Water Heater Descaling of Solar Collectors plate connected to solar water heater of various capacity (by circulating descaling solution/agent for 20-30 min.) cleaning entire surface (dismantaling of plates shall be carried out if required, including fixing, soldering if required) and cleaning of tank of capacity 100/200/300/400 LPD by solar descaling (such as mil acidic solution/agent including drain out all scales, dust dirt by pressure pipe cleaning & replacemen of U/S drain plug along with all required work such as welding, threading, etc, Complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair Evacuated tube collector type 100 LPD solar water heater (MNRE) approved along with GI storage tank of suitable capacity on iron angle applying water sealant around stand fasteners including dismanaling of old unserviceable solar water heater, Complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair Evacuated tube collector type 200 LPD solar water heater (MNRE) approved along with GI storage tank of suitable capacity on iron angle applying water sealant around stand fasteners including dismanaling of old unserviceable solar water heater , Complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair Evacuated tube collector type 300 LPD solar water heater (MNRE) approved along with GI storage tank of suitable capacity on iron angle applying water sealant around stand fasteners including dismanaling of old unserviceable solar water heater, Complete all as specified and directed by Engr-in-charge.
Supply and fix in replacement of old unserviceable water tank of flat plate solar water heater/ Evacuated tube solar water heater of capacity 100/200/300/400 LPD along with all connecting items like nut bolts gasket soldering welding etc, Complete all as specified and directed by Engr-in-charge.
M&L for cladding of insulated rubber (rock wool/ mineral wool/ fibre glass wool) as per fixed on site including one layer of aluminium sheet/ flakes cover on outlet/ air vent of solar water heater GI pipe in a manner to minimise any type of heat losses, Complete all as specified and directed by Engr-in-charge.
Supply & fix in replacement of Unserviceable forged brass ball valve screwed of size 20mm dia, Complete all as specified and directed by Engr-in-charge.
Supply & fix in replacement of Unserviceable Gate valve of size 20mm dia, Complete all as specified and directed by Engr-in-charge.
S&F in repair unserviceable EPDM sheet including required nut, bolt and washer set at both end , used for jointing two flat plate collector/ at end of solar flat plate collector or connection of tubes in evacuated tube solar water heater, Complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement heating element 3000 watt alongwith thermostat of suitable shape and size fitted in Solar water heater tank, conforming to ISI with rubber washers, with clamps all as specified and directed by Engr-in-charge. Make- Thermoking/Hottop or equivalent make as per PS.
Supply and fixing in replacement U/S stem type thermostat with switch/nob suitable for Solar water heater all as specified and directed by Engineer - in - Charge. Make : Bajaj, Spherehot, Racold or equivalent make as per PS
Supply and fixing in replacement GI tubing, medium grade in short lengths with all fittings such as elbow, tee, socket, nipple, reducing socket, reducing elbow, reducing tee including guttees / saddles etc of size 20 mm bore and fixed to wall / floor / ceiling including connection to mixing arrangements of hot / cold water and making good disturbed surfaces all as specified and directed by Engineer - in – Charge. Make : Jindal / Prakash / Surya.
Labour and material for fixing only serviceable FPC solar plates retrieved from item no. 11.00, 12.00, 13.00 including all nuts washers suitable flexible rubber/ silicon hose pipes welding etc including dismantalling of existing non functional FPC solar heater, Complete all as specified and directed by Engr-in-charge.
Supply and replace Unserviceable Plug and socket board with metal plug and socket (1 phase+neutral & earth) of 20 Amp rating DP of make- Polycab with item code GPDPS10004 in accordance with IS 13032, IS 8623, IEC/BSEN 61439-3. , Complete all as specified and directed by Engr-in-charge.
S&F in repair SPN MCB ranging from 6 to 32 Amp B-Curve type 240 Volt, 50 Hz AC supply with breaking capacity of 10 KA in accordance with IS/ IEC 60898-1 of Make- Polycab/Legrand/ABB/Havells or equivalent make as per PS
S&F in repair SP MCB ranging from 6 to 32 Amp B-Curve type 240 Volt, 50 Hz AC supply with breaking capacity of 10 KA in accordance with IS/ IEC 60898-1 of Make- Polycab/Legrand/ABB/Havells or equivalent make as per PS
M&L for MS Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot,drilling holes for bolts, in any shape or size as indicated or directed and provn of two coat of systhic enamed pait over a coat of red oxide primer complete primer all as specified and directed by Engr-in-charge.
M&L for Providing precast cement concrete set in cement mortar 1:6 of type B1 (1:2:4) 20mm graded aggregates for stand of solar water heater, Complete all as specified and directed by Engr-in-charge.
S&F in repairs Energy efficient LED building lights of 30 Wattage with PDC Aluminium body and clear glass, LED lens for wide beam distribution with efficacy greater than 100 Lm/watt , 5700K CCT, pf more than .90 all as specified and directed by Engr-in-charge. Make - Polycab cat Pt No- PCGLS T1 30L with product code PUB0505008 approved Make or equivalent make of Havells/Bajaj/Phillips etc.
M&L for earthing complete as per electrical plate No. 5 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0 mm thick, buried directly vertically in ground in a pit depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth Galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing galvanised iron strip shall be protected by galvanised iron or steel pipe 40 mm bore medium grade and connected to continuous earth wire on pole / test point to main board. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil/PCC/Rocky soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed as well as testing included.
Notes for Srl item 29 above-: Note-1Following items deemed to be included in quoted rate (a) Earth Electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre (c) M&L for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcol dust and common salt as directed (e) All labour involved including testing of earth net work (f) Excavation and earth work or drilling hole for electrode (g) P.C.C pit and C.I cover (h) Funnel and watering pipe, wire mesh and copper lugs etc. as specified (j) G.I protection pipe of size oredered specified for protection of earthing lead from mechanical injury or tempering. (k) connected lead from test point to main switch or switch board or equipment to be earthed. Note 2-: In case, after completion if the desired earth resistance is not obtained on testing then, the earthing will be redone at no extra cost.
Labour and material for fixing only serviceable FPC solar water heater tank of different capacities retrieved from item no. 11.00, 12.00, 13.00 including all nuts washers suitable flexible rubber/ silicon hose pipes welding etc including dismantalling of existing non functional FPC solar heater complete all as specified and directed.
M/S TRADE LINKERS
SHREE BHAGWATI ENTERPRISES
R K ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .