Repairing of Water Reservoirs, Auditorium, Rest Shelter and Quarters at Tikak Colliery

Removing white or colour wash by steel wire brushing and/or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

Providing asbestos cement corrugated sheet roofing 6 mm thick fixed with G.I. Coach screw squre head, 8 mm dia and 115 mm long/G.I. cranked hook bolt/G.I. Holt/G.I. cranked bolt of 8 mm dia with G.I. Flat washer 25 mm dia x 1.0 mm thick and bitumen washer 25 mm dia x 3 mm thick complete excluding the cost of roof truss, purlins etc.

25 mm thick cement concrete toping 1:2:4 (1 cement: 2coarse sand: 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed.

Renewing vitreous china pedestal type water closet (European type W.C. pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets required.

15mm thick Cement plaster in single coat on single or half brick wall for interior plastering upto 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. 1:4

Distempering with dry distemper of approved brand and manufacture (Two coats) and of requried shade on old wall surface to give an even shade, after throughly brushing the surface the surface clean of all grease, dirt, loose pieces of scales including preparing surface even and sand papered smooth including subsequent coat.

Painting one coat (excluding priming coat) on previously painted steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.High gloss(Asian paint/Berger paint/ICI paint/J & N paint/Nerolac.)

Renewing wash basin with C.P. brass chain with plug, PVC waste pipe Including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing undressed wood work in roof truss, rafter, purlin, tie and the like including hoisting and fixing in position with necessary spikes, nails including M.S straps with bolt and nuts etc. complete with kiricide oiling two coats to all timber members and two coats of anticorrosive paint to M.S straps (M.S flats, angle clesats and bolt and nuts required for flats, angle cleats wherever use shall be With 2nd class treated timber

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40 mm x 3 mm x 250 mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide olling to the timber faces in contact with C.C and masonry as directed and specified.

Providing and fixing A.C. two pices adjustable close fitting seated or unserated ridging including supplying, fitting and fixing galvd. Coach screws 115 mm long x 8 mm dla and 1.6 mm of G.I. J or L hook of 8 mm dia with G.I. Flat waher 25 mm x 12.6 mm and bitumen washer 25 mm x 3 mm complete.

Supplying, fitting and fixing AC plain sheet for ceiling fixed with timber beading 38mm by 12mm complete as diected.

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross brand and face veneered ply wood panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75 mm 3.5mm) 6 nos with necessary wood

painting one coat (excluding priming coat) on old wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping.

Providing galvd iron ridging of TATA SHAKTEE/SAIL/JSW Steel including supplying and fixing necessary galvd screws/washers etc.complete as directed. 0.45mm thick, 150 mm lapping.

Brick work in cement morter with 1st class brick including racking out joints and curing comnplete as directd.In suoerstructure above plinth level up to 1st floor level.in proportion 1:3

Dismantling all types of corrugated/trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels

Earthwork in excavation for foundation trenches, drain cutting and removal of surplus. earth with all lead and lift as directed and specified. (in ordinary post)

Providing soling in foundation and under floor best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the surface as directed brick on flat soling

Plain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footings, steps wall brick works etc. as directed (1:3:6).

providing and laying plain/reinforced cement concrete works cement, coarse sand & 20 mm down graded stone aggregate including dewatering if necessary and curing complete etc. complete as directed. (M 15 grade concrete or Prop.1:2:4) in sub-structure

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/R.B. walling including straightening, cleaning, cutting and bending to proper 21 shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level).a) From Primary

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and catering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in-situ reinforced concrete work in: Foundation, footing, bases of columns, pile cap, raft and mass concrete works

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed.a) TATA make Circular

Providing fly proof steel wire netting of I.S gauge designation 85 with wire of dia 0.05 mm over hollock or other wood dressed frame including 1st class timber beading of 38mm x 12 mm size chamferred includuing fitteng fitting, fixing with nessecarry wood screws etc.

Total impact of GST for the purpose of CTC