Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8.4 Cr
EMD Value
₹8.4 L
Closing Date
11 Jan 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Supply Installation Commissioning and placement of Furniture work at Hostel block Mess and Dinning for Development of Permanent Campus Phase-I works of IIM Sambalpur, Odisha.
NBCC/SBG/IIM/SAMBALPUR/2022/35
NBCC/SBG/IIM/SAMBALPUR/2022/35
Open Tender-Domestic
Civil Works General
Sambalpur, Odisha
₹11,800
₹8.4 L
11 Jan 2023
22 Dec 2022
11 Jan 2023
11 Jan 2023
30 Jan 2023
Tender for"Supply, Installation Commissioning and
placement of Furniture work at Hostel block, Mess and
Dinning under Package I for Development of Permanent
Campus (Phase-I works) of IIM Sambalpur, Odisha at
IIM, Sambalpur , Odisha".
Sl No. BUILDING Total Amount in (Rs.)
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.12.29 23:38:40
MANDAL IST
Supply, Installation Commissioning and placement of Furniture work at Hostel block, Mess and Dinning under Package I for Development of Permanent Campus
(Phase-I works) of IIM Sambalpur, Odisha
The study chair must be designed as per the minimum requirements and design to give the superior comfort, aesthetic look, better strength, stability, durability.
Seat/Back: The seat shall be made up of 12 ± 1mm thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. Specially designed seat/back cover to give a
modern and aesthetic look. The seat and back shall be extra thick foam on front edge to give comfort to popliteal area.
Permanent Contact Mechanism: The chair should have an option of a permanent contact mechanism, which allows the back to flex naturally as you recline, for maximum comfort and relief.
Pronged Base: It should have 5 - pronged Nylon base / Chromium coated base for better stability of the Chair with Castor Universal Heavy Duty Wheel for smooth movement of chair.
Ergonomic Back: Ergonomically designed back-support to support back and avoid strain.
Arm Rest: The Arm rest is of PP cover fix on to the pipe frame. The mechanism shall be designed with fixed type.
Moulded Foam: The seat & back foam shall be designed with contoured lumbar support for extra comfort. The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf
(as per IS:7888 for 25% compression), which not only gives a soft feeling on first contact but also provides a firm support to ensure hours of comfortable sitting.
Pneumatic height adjustment: At a press of a lever, should have option to adjust the seat of chair to our required height, should have advanced pneumatic height adjustment facility. It also provides a cushioning
effect each time you sit, preventing sudden jerks to body.
Framing/Support Structure: Frame is cantilever type and made up of 19mm diameter CRCA ERW 2 mm thick pipe or as per the minimum requirements and design. The powder coating of all frame/structure
must be of 50 to 60 Micron thickness with properly processed through seven tank pre-treatment process to avoid natural corrosion and depletion of surface.
Colour: Shall be finalised during placing of order or as per the approval of IIM.
Dimensions: (+- 20mm)
Back Rest Size : 470mm x 630mm (+- 20mm)
Seat Size : 490mm x 470mm (+- 20mm)
Arm Size : 260mm x 60mm (Min)
Both Arm Distance (O) : 610mm (+- 10mm)
Seat Top to Arm Top : 180mm (Min)
Seat Top to Back Top : 600mm (Min)
Seat top Height Min : 450mm
Seat top Height Max : 560mm
Chair Back Height Min : 970mm
Chair Back Height Max : 1100mm
Base Measurements : 640mm Dia Min.
Rendered image is attached for reference only.
STUDY TABLE : Providing, Supplying & placing Study table of Overall size 1200mm width 600mm Depth and 750mm Table top height.
The study table shall be provided with drawer, shutter, foot rest, modesty panel etc.
The table shall have one small drawer and a single shutter storage of 400mm width including side leg of the table and Vertical panel. The Storage shall be fixed below drawer and shall be up to floor level. The
Wooden foot rest shelf made up of 18mm thick pre laminated MDF Board of size 400 depth & full length (Foot rest top 100mm height from floor) with proper stiffener/support of wooden plank fixed below foot
rest from the floor for proper load bearing and connecting to Leg and vertical panel. Drawer shall be mounted on heavy duty telescopic ball bearing slide of 27mm width (Minimum) and 450mm length (as per the
minimum requirement) for smooth operation. The drawer Facia shall be of 150mm height and the bottom storage shall be placed above 50mm from flooring with skirting on all sides. Complete table shall be
made up of Pre laminated MDF board confirming to IS: 14587:1998.
Table top shall be made up made in 25mm thick pre laminated MDF board (all outer edge must be of smooth edge for better safety purpose). The main vertical outer side panel (leg) shall be made up of 18mm
thick pre laminated MDF Board. The Storage Side vertical panel, Foot rest shelf shall be made in 18mm Thick pre laminated MDF. The Shutter, Drawer Facia and shelves shall be made in 12mm Thick pre
laminated MDF. The Storage Back shall be made in 9mm thick MDF. The back modesty panel shall be made up of 12mm thick pre laminated MDF board with proper stiffener of full height. The drawer/storage
side vertical also support the table top for proper load bearing. All the MDF board used shall be with both side decorative colour (as decided by the Engineer In-charge or as per the requirement). All the pre-lam
board laminate thickness is 1mm.
The Shutter of the storage shall be fixed with the help of cup hinges. The Drawer & Shutter should be provided with recessed type aluminium/brass handle (Full length) at top edge of the shutter/drawer to open
the shutter/drawer. All the edges of table top, Drawer Facia, Shutter and Foot rest shall be sealed with 2mm thick PVC Edge banding. The Longer Edges of Led and Vertical Panel shall be sealed with PVC edge
band of 2mm thickness and for shorter sides 0.8mm thick PVC edge-band shall be used. Rest all the panels shall have PVC edge band of 0.8mm thickness except Drawer bottom and Storage Back. PVC edge
band shall be pasted on through feed edge-banding machine with the help of hot melt glue (Dorus KS217 / KLEBERIT 779.6 or equivalent make). Edge band shall be pasted in such a way that it shall pass gravity
pull test for 7kg of load. The drawer should have inbuilt locking arrangement
All the MDF board shall be joined by proper machine made interlocking arrangement for better strength, stability, durability. Complete unit to be supply in Knock Down construction and to be assembled at site.
Standard knock down fittings shall be used for assembly. The Leg shall be provided with heavy duty glide / plinth screw with height adjustable nylon leveller for levelling against uneven floor surface and to avoid
direct water contact. Material used shall be as per approved make list provided and shall be as per engineer in-charge. Supplier must have to provide material test report confirming to IS standard mentioned and
proof for approved or equivalent brands
Rendered image is attached for reference only.
Tolerance in dimension will be ± 20 mm
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.12.29 23:38:40
MANDAL 1/6 IST
OVER HEAD BOOK STORAGE:
Providing, Supplying & placing Wall Mounted Open Book Shelf of overall size 1200mm Width, 350 mm Depth and 750 mm Height (Including task light cover) to be fixed 650mm above table top level.
The open book shelf shall have back panel of size 1200mmX750 mm made in 18mm thick Pre laminated MDF board with all the edges sealed with 2mm thick PVC edge-band. The overall Book shelf unit shall be
divided in two parts having 4 equivalent compartment . The top & bottom MDF Board corner edge must be smooth surface and also 50mm projection from the internal shelves. The side panel depth is 350mmm.
Complete Book shelf shall be made in 18mm thick Pre laminated MDF board confirming to IS:14587:1998. All the pre-lam board laminate thickness is 1mm. All exposed edges shall be sealed with 2mm thick PVC
Edge band and all non-exposed edges with PVC edge-band of 0.8mm thickness. PVC edge band shall be pasted on through feed edge-banding machine with the help of hot melt glue (Dorus KS217 / KLEBERIT
779.6 or equivalent make). Edge band shall be pasted in such a way that it shall pass gravity pull test for 7kg of load. Complete unit to be supply in Knock Down construction and to be assembled at site.
Standard knock down fittings shall be used for assembly. The Book shelf unit shall be grouted on wall with the help of 8 No. anchor fasteners and there shall be provision of M.S. Bracket fixed below (throughout)
book shelf for additional support. The L shape support bracket shall be made in 2mm thick CRCA sheet with 50mm flange size and duly powder coated as per IS:13871:1993 , 50 to 60 micron with properly
3 HOSTEL processed through seven tank pre-treatment process to avoid natural corrosion and depletion of surface. The Support bracket shall be grouted on wall with the help of wall plug and anchor bolts. The anchor Each 590 16,321.00 96,29,390.00
fasteners shall be of wuerth / Hilti / Fischer or equivalent make.
While fixing the book shelf the top edge of book shelf shall match with the top edge of the bed back rack. Material used shall be as per approved make list provided and shall be as per engineer in-charge.
Supplier must have to provide material test report confirming to IS standard mentioned and proof for approved or equivalent brands.
Rendered image is attached for reference only.
10 years warranty is required for this item.
Tolerance in dimension will be + 20 mm
SINGLE BED WITH STORAGE
Providing, Supplying & Placing Single bed with box storage within openable from top side, overall size of the bed shall be 1980mm (Length) X 920mm (Width) X 920(H) (+- 20mm) with Top of bed/plank Height shall be at
395mm from floor level and Bottom plank shall be placed 75mm above floor level. Complete outer structure shall be made in Pre-laminated MDF board confirming to IS:14587:1998. All the pre-lam board laminate
thickness is 1mm. Internal support structure shall be made in Square/Rectangle MS tube of size 25mmx40mm & 25mm X 25mm with wall thickness of 18 SWG/1.2mm confirming to IS:7138:1973 respectively and duly
powder coated as per IS:13871:1993 in a range of 50 to 60 microns with properly processed through seven tank pre-treatment process to avoid natural corrosion and depletion of surface. Complete structure shall be
placed on MS Square leg (leg height may be varies as per the requirement) of cross section 50X50X40 mm with wall thickness of 1.6mm with glide/plight screw/Nut Bolt and heavy duty leveller Made of 100% recyclable
nylon M10 bolt insert for levelling of Table for height adjustable & shall be fixed to MS structure with bottom holding support bracket made up of M.S. sheet of 1.6mm thickness with proper welding of Nut on both side for
proper load transfer & adjustment of Bolt. PVC edge band shall be pasted on through feed edge-banding machine with the help of hot melt glue (Dorus KS217 / KLEBERIT 779.6 or Equivalent make). Edge band shall be
pasted in such a way that it shall pass gravity pull test for 7kg of load. Complete unit to be supply in Knock Down construction and to be assembled at site. All the MDF board shall be joined by proper machine made
interlocking arrangement and also fixed with screw/anchored from the inside. (Please refer attached drawings for detail of MDF board, structural member & fittings etc.)
Head board and Foot board:
Head board and Foot board shall be made up of 18mm Thick Pre-laminated MDF with both side decorative colour and all the exposed edges shall be sealed with PVC edge band of 2mm thickness for top edge and 0.8mm
thickness for side and bottom edge. Head board size 900X942mm and Foot board Size 900X350mm (Minimum dimension).
Side Panel of appx. 350mm width and appropriate length to form overall length of the bed including headboard and tail board. Side panel shall be made in 12mm thick pre-laminated MDF with both side decorative colour
4 HOSTEL and all exposed edges shall be sealed with PVC edge band of 2mm thickness for top edge and 0.8mm thickness for side and bottom edge. (Minimum dimension). Each 590 29,785.00 1,75,73,150.00
Plank/Bed Top and Bottom:
Top Plank and bottom plank shall be made in 18mm thick Water Proof Ply confirming to IS:710 with all the exposed edges shall be sealed with 0.8mm thick PVC edge band with necessary groove cut to fit inside the
frame at top & bottom. The ply must have pull hinge type handle for smooth opening/operating.
MS Structure for Bed:
Metal support structure shall be consisting of M.S. Rectangle & Square hollow pipe and shall be provided with cross members holding brackets made in M.S. Sheet of minimum 1.2mm thickness. The longer side frame
should be made up rectangle pipe of 25mmx50mm (Both left & right side) shall be welded assembly and three short vertical sections placed on equivalent distance from each other for better stability. Both the left & right
side frame shall be fixed to each other on site with the help of 10 No cross members made in M.S. Pipe. All outer member are 25mmx50mm rectangle pipe & all inner members are 25mmx25mm square pipe to support
Top plank and bottom plank. The Cross members shall be fixed to side frame with the help of machine screw/nut/bolt with proper bracket (1.2mm thick) and complete metal cage shall be supported with four MS Leg to
be fixed at all the corners.
The Metal structure shall be covered with wooden panels and only MS leg shall be visible out of all metal components. Standard fasteners, Allen bolts, screws and hardware shall be used for assembly on site. Mattress
tucking space shall be of 5mm. Material used shall be as per approved make list provided and shall be as per engineer in-charge. Supplier must have to provide material test report confirming to IS standard mentioned
and proof for approved or equivalent brands.
Rendered image is attached for reference only.
Tolerance in dimension will be ± 20 mm
BED HEAD BOARD STORAGE:
Providing, Supplying & Placing BED BACK RACK of overall size 900mm Width X 250mm Depth and 2200mm Height (Minimum Dimension)
The back rack shall be placed as part of single bed and shall be attached (movable) to head board of the bed. Rack shall consist of open shelf making two big horizontal compartment at top and bottom above
headboard height of the bed and three small vertical compartment at middle area of the rack (all the compartment are equivalent width & height respectively) and the rack bottom shelves should be at the top of
bed head board.
Materials & Support Structure details:
The horizontal MDF boards should have proper stiffener support at bottom edge & side edge by using Angle Bracket (50mx25mmx1.2mm) for better load bearing/stability. The rack shall be grouted from back
side of wall at top & bottom with the help of metal brackets and anchor fasteners for better stability (minimum 6 nos. of bracket & 12 nos. of anchor fastener/Hi-tensile Allen Bolts to be used – Min 6mm dia.)
and as per the requirement of the site / Engineer In-charge. All the pre-lam board laminate thickness is 1mm.
Complete rack shall be made in 18mm thick pre-laminated MDF Board confirming to IS:14587:1998 and all the exposed edges shall be sealed with PVC edge band of 2mm Thickness for all the front edges and
5 HOSTEL 0.8mm thickness for all other edges. PVC edge band shall be pasted on through feed edge-banding machine with the help of hot melt glue (Dorus KS217 / KLEBERIT 779.6 or Equivalent make). Edge band shall Each 590 21,500.00 1,26,85,000.00
be pasted in such a way that it shall pass gravity pull test for 7kg of load. Complete unit to be supply in Knock Down construction and to be assembled at site. The grouting bracket (Angle - 50mmx50mm) shall
be made up of CRCA sheet of 1.2mm thickness and duly powder coated with epoxy powder as per IS:13871:1993, 50 to 60 micron with properly processed through seven tank pre-treatment process to avoid
natural corrosion and depletion of surface. Material used shall be as per approved make list provided and shall be as per engineer in-charge. The bottom of vertical side panel must be fixed horizontally by using
18mm thick pre laminated MDF board of 350mm depth for better stability of the rack. Supplier must have to provide all material test report confirming to IS standard mentioned and proof for approved or
equivalent brands.
Rendered image is attached for reference only.
Tolerance in dimension will be + 20 mm
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.12.29 23:38:40
MANDAL 2/6 IST
Providing, Supplying & Placing BED side SHOE RACK of overall size 350mm Width X 350mm Depth and 1000mm Height.
The shoe rack shall be placed inside the room near to side panel of back rack. Shoe Rack shall consist of open shelf at top and shuttered compartment at bottom. The shutter having inbuilt full height louver for
ventilation provision within it. Skirting shall be of 40mm height and having heavy duty adjustable plinth screw with nylon leveller to level the rack against uneven floor level.
Materials & Support structure details:
The Complete rack (Top, Bottom & Side panels) shall be made in 18mm thick pre laminated MDF Board ( confirming to IS:14587:1998) and all the exposed edges shall be sealed with PVC edge band of 2mm
Thickness for all the front edges and 0.8mm thickness for all other edges. PVC edge band shall be pasted on through feed edge-banding machine with the help of hotmelt glue (Dorus KS217 / KLEBERIT 779.6 or
equivalent make). Edge band shall be pasted in such a way that it shall pass gravity pull test for 7kg of load. Complete unit to be supply in Knock Down construction and to be assembled at site. All the pre-lam
board laminate thickness is 1mm.
The shutter shall be made up of 12mm thick MDF Board of 600mm height and shall be fixed on the cabinet with the help of soft close cup hinges. The shuttered compartment shall have two shelf making three
6 HOSTEL equal compartment for placing footwear. All the shelves are made up of 12mm thick pre laminated MDF Board. The Back panel of the shoe rack shall be made in 9mm thick pre laminated MDF confirming to Each 590 6,000.00 35,40,000.00
IS:14587:1998 and to be fixed in the groove made on cabinetry. Shutter should be provided with recessed type aluminium/brass handle (Full length) at top edge of the shutter to open the shutter. Material used
shall be as per approved make list provided and shall be as per engineer in-charge. All the MDF board shall be joined by proper machine made interlocking arrangement for better strength, stability, durability.
Complete unit to be supply in Knock Down construction and to be assembled at site. Supplier must have provide material test report confirming to IS standard mentioned and proof for approved or equivalent
Rendered image is attached for reference only.
Tolerance in dimension will be ± 20 mm
Mattress Dimensions - 1900mm (L) x 900mm (W) (+- 20mm) must be suitable for our Bed dimensions.
Mattress thickness - 150mm PU Foam + Bonded Foam
Bonded density 85 - Thickness 50mm + 32d PU foam thickness 50mm in Poly viscose cloth with 25mm quilt on both sides tape edge. The top protecting Layer fabric with soft quilting & which also protecting
from allergy and asthma. Reversible Mattress with bonded side hard feel and PU foam side soft feel. The high resilient foam must have balanced comfort base and should provide a stabilizing base. The Mattress
7 HOSTEL must have pressure relieving foam layer which provide continuous support to the weight for longer period of time. Thoughtfully designed, its world-class 5 layer construction adapts to sleep style, striking a Each 590 9,600.00 56,64,000.00
perfect balance between sink and bounce. The mattress must have a complimentary premium quality mattress protector. The mattress protector must be waterproof and should protect the mattress from stains,
dust, bed bugs, etc. Approved makes are Kurl-on, Sleepwell, Century, Duro-flex or equivalent.
Rendered image is attached for reference only.
Mattress will be procured as per approval of IIM sambalpur.
COVER: Luxe modal fabric that stays soft, fresh and breathable use after use. Comes with unique, innovative comfort-adjustment zippers to change the pillow from compact to fluffed up in an instant.
PILLOW FILL: Virgin micro fibre for that softness.
05 years warranty is required for this item.
Pillow will be procured as per approval of IIM sambalpur.
MIRROR SIZE: 450mm (W) X 1200mm (H)
The thickness of Mirror Glass is 4MM. Back panel of the mirror is to be supported with 10mm thick pre laminated MDF Board. Outer side 40mm width edge cladding/support should be of 18mm thick Pre
laminated MDF. All the MDF board should have 0.8mm thick PVC edge band & also post form type pre-laminate to have smooth finish & aesthetic look of the mirror. The bottom portion of mirror to be fixed with
18mm thick MDF Batten of 40mm (Overall depth) projected to be fixed to cover-up the angle brackets. The mirror to be fixed on wall with the help of 4 nos. of heavy duty hook with suitable fixing arrangement
on back side and at bottom two angle bracket (25x25x1.2mm) to be fixed to withstand the load of Mirror.
Edge band/Laminate shall be pasted on through feed edge-banding machine with the help of hotmelt glue (Dorus KS217 / KLEBERIT 779.6). Edge band shall be pasted in such a way that it shall pass gravity pull
test for 7kg of load.
MDF Board is confirming to IS:14587:1998. Mirror to be supplied of approved make (Saint Gobain, Modicare or equivalent make).
Rendered image is attached for reference only.
Curtain with Curtain Rod
Supplying and fitting of Curtain with Curtain Rod as per approved color shade. Size - 1200 W x 1600 H
Curtains with rods -- rods made of SS-304 rounded pipe in 28 mm diameter ,reinfaced friction and eleminated scratches in diffrent fast colour and composition of fabrics are 52% polyster, 48%cotton, weight will
be 371 grms linear mtrs repet h= 37.5cms, v= 47.5 cms.
The door should have double curtain having minimum lap of 150 mm overlap.
rods - mac, vista, marvel
fabrics- kantila, sarom, beyond,
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.12.29 23:38:40
MANDAL 3/6 IST
2000(W) X 1950(D) X 750(H) WITH Pedestal. Office table with robust structure and good stability with levelling adjustment to adjust with the uneven floor surface.
TOP:- 30mm thick table top made up of 18mm thick pre-laminated MDF board with 12mm thick Prelaminated made up of MDF fixed along all the edges.
LEG:- 25mm thick Leg or Gable End made up of 25mm thick pre-laminated MDF board with M.S. Leveler bracket to give floating look.
MODESTY:- Modesty panel made up of 18mm thick pre-laminated MDF board providing stability to structure and allow sufficient leg privacy to the user. "D" headed decorative aluminium profile fixed on it, the
aluminium profile to be fixed by making grove in the panel for better fixing and integrated look.
PEDESTAL AND RETURN STORAGE:-
Below table drawer unit with two books and one file drawer.
Combo storage with three drawers and two shutters with good storage capacity usable as return storage for office storage.
TOP:- 28mm thick top made up of 18mm thick pre-laminated MDF board with 8mm thick Prelaminated made up of MDF fixed along all the edges from the bottom side which provide decorative waterfall edge
profile to top with twin colour look the decorative trim to be connected with each other.
11 CARCASS:- Side panel, bottom panel and skirting are made up of 18mm thick pre-laminated MDF board are fixed with the back panel by proper grooving done on the back panel which is made up of 9mm thick Each 11 56,212.00 6,18,332.00
pre-laminated MDF board. The side panel, bottom and top panel are to be assembled with the help of wooden dowel, knock down fittings Drum with screw and corner fittings to ensure the stability of box
structure formed.
DRAWER AND SHUTTER:- Provision of two books drawer of size 400(W) X 450(D) X 100(H) made up of 12mm thick pre-laminated MDF board with the bottom panel of 9mm thickness. The drawer mounted on a
telescopic slide with 3/4 extension. The big drawer of size 314(W) X 400(D) X 340(H) made up of 12mm thick pre-laminated MDF board with the bottom panel of 9mm thickness is mounted on a telescopic slide
with a full extension allowing storage of files with the help of file manager. Drawer facia and shutter made up of 18mm thick pre-laminated MDF board. Provision of centralizes locking for all three drawers and a
separate lock with tower bolt for two shutters. Flush type pull handles are fitted on Drawer facia and shutters.
Rendered image is attached for reference only.
Tolerance in dimension will be ±20 mm
Supplying and placing in position of the 360 Degree Revolving Medium Back Chair. The chair of size- (W)610mm X (D)660mm X (H)1130mm,Maximum Seating Height - 570mm and Minimum Seating Height -
470mm . The Novel S Curve Of The Backrest Ensures That The Natural Curve Of The Spine Is Maintained While The Adjustable Leaf Lumbar Support With C-Curve Provides Extra Comfort And Support To The
WARDEN Lower Back. Adorned With A Ventilated Body Fabric. The Synchro Single Locking Mechanism And Tilt Tension Control Further Work To Provide An Ultimate Ergonomic Experience. The Solid Nylon Base Provides
OFFICE Extraordinary Support While The 55Mm Castors Help In An Easy Smooth Movement. High-quality fabric upholstery with high abrasion-resistance and superior tear strength & colourfastness. Premium high-density
virgin foam for comfortable seating. High stability chair with no-tip over, clearing drop test of 102kgs. The wooden armrest with padded upholstery is provided for extra comfort.
Rendered image is attached for reference only.
Supplying and placing in position of cantilever type visitor chair , The chair of size- (W)600MM X (D)630MM X (H)1030MM. Seating Height - 470mm and Seat size – 500 X 500, Back Height - 580mm. . The Novel
S Curve Of The Backrest Ensures That The Natural Curve Of The Spine Is Maintained While The Adjustable Leaf Lumbar Support With C-Curve Provides Extra Comfort And Support To The Lower Back. Adorned
13 With A Ventilated Body Fabric, . The Strong Armrests Along With The Chrome Cantilever Base Provide Extraordinary Support For Easy Seating. Each 22 11,500.00 2,53,000.00
Rendered image is attached for reference only.
VISITOR ROOM : 3 SEATER SOFA
SEAT FOAM: The seat is made of PU foam with Density 28± 2 kg/cu.mtr having an additional top layer of super soft PU foam in Density 32 ± 2 kg/cu. upholstered with fabric or leatherette.
BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette .
UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood ( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface
VISITOR defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for
cushioning purpose.
LEG ASSEMBLY: It is made up of Solid wood in square shape of size 40x40mm. (L) 2040MM X (D) 900MM X (H) 940 mm seat (H) 450 mm
Rendered image is attached for reference only.
Tolerance in dimension will be ±20 mm
CENTRE TABLE - 995(W) X 560(D) X 420(H)
Supplying and placing in position of Center Table of size - 995 x 560 x 420mm,Understructure of the table which includes legs , Top is made up of 8mm thick toughened glass , Table provided with shelve made
VISITOR up of toughened glass .
Tolerance in dimension will be ±10 mm
Supplying and placing in position of Center Table of size - 560 x 560 x 420mm,Understructure of the table which includes legs which is made up of Pre-laminated MDF board , Top is made up of 8 mm thick
toughened glass , Table provided with shelve made up of toughened glass .
Rendered image is attached for reference only.
RAJESH DULALCHANDRA MANDAL
Tolerance in dimension will be ± 10 mm
DULALCHANDRA Date: 2022.12.29 23:38:40
MANDAL 4/6 IST
OVER HEAD BOOK STORAGE:
Providing, Supplying & placing Wall Mounted Open Book Shelf of overall size 1200mm Width, 350 mm Depth and 750 mm Height (Including task light cover) to be fixed 650mm above table top level.
The open book shelf shall have back panel of size 1200mmX750 mm made in 18mm thick Pre laminated MDF board with all the edges sealed with 2mm thick PVC edge-band. The overall Book shelf unit shall be
divided in two parts having 4 equivalent compartment . The top & bottom MDF Board corner edge must be smooth surface and also 50mm projection from the internal shelves. The side panel depth is 350mmm.
Complete Book shelf shall be made in 18mm thick Pre laminated MDF board confirming to IS:14587:1998. All the pre-lam board laminate thickness is 1mm. All exposed edges shall be sealed with 2mm thick PVC
Edge band and all non-exposed edges with PVC edge-band of 0.8mm thickness. PVC edge band shall be pasted on through feed edge-banding machine with the help of hot melt glue (Dorus KS217 / KLEBERIT
779.6 or equivalent make). Edge band shall be pasted in such a way that it shall pass gravity pull test for 7kg of load. Complete unit to be supply in Knock Down construction and to be assembled at site.
Standard knock down fittings shall be used for assembly. The Book shelf unit shall be grouted on wall with the help of 8 No. anchor fasteners and there shall be provision of M.S. Bracket fixed below (throughout)
17 FPM book shelf for additional support. The L shape support bracket shall be made in 2mm thick CRCA sheet with 50mm flange size and duly powder coated as per IS:13871:1993 , 50 to 60 micron with properly Each 29 16,321.00 4,73,309.00
processed through seven tank pre-treatment process to avoid natural corrosion and depletion of surface. The Support bracket shall be grouted on wall with the help of wall plug and anchor bolts. The anchor
fasteners shall be of wuerth / Hilti / Fischer or equivalent make.
While fixing the book shelf the top edge of book shelf shall match with the top edge of the bed back rack. Material used shall be as per approved make list provided and shall be as per engineer in-charge.
Supplier must have to provide material test report confirming to IS standard mentioned and proof for approved or equivalent brands.
Rendered image is attached for reference only.
Tolerance in dimension will be ± 20 mm
Providing, Supplying & Placing BED side SHOE RACK of overall size 350mm Width X 350mm Depth and 1000mm Height.
The shoe rack shall be placed inside the room near to side panel of back rack. Shoe Rack shall consist of open shelf at top and shuttered compartment at bottom. The shutter having inbuilt full height louver for
ventilation provision within it. Skirting shall be of 40mm height and having heavy duty adjustable plinth screw with nylon leveller to level the rack against uneven floor level.
Materials & Support structure details:
The Complete rack (Top, Bottom & Side panels) shall be made in 18mm thick pre laminated MDF Board ( confirming to IS:14587:1998) and all the exposed edges shall be sealed with PVC edge band of 2mm
Thickness for all the front edges and 0.8mm thickness for all other edges. PVC edge band shall be pasted on through feed edge-banding machine with the help of hotmelt glue (Dorus KS217 / KLEBERIT 779.6 or
equivalent make). Edge band shall be pasted in such a way that it shall pass gravity pull test for 7kg of load. Complete unit to be supply in Knock Down construction and to be assembled at site. All the pre-lam
board laminate thickness is 1mm.
The shutter shall be made up of 12mm thick MDF Board of 600mm height and shall be fixed on the cabinet with the help of soft close cup hinges. The shuttered compartment shall have two shelf making three
18 FPM equal compartment for placing footwear. All the shelves are made up of 12mm thick pre laminated MDF Board. The Back panel of the shoe rack shall be made in 9mm thick pre laminated MDF confirming to Each 29 6,000.00 1,74,000.00
IS:14587:1998 and to be fixed in the groove made on cabinetry. Shutter should be provided with recessed type aluminium/brass handle (Full length) at top edge of the shutter to open the shutter. Material used
shall be as per approved make list provided and shall be as per engineer in-charge. All the MDF board shall be joined by proper machine made interlocking arrangement for better strength, stability, durability.
Complete unit to be supply in Knock Down construction and to be assembled at site. Supplier must have provide material test report confirming to IS standard mentioned and proof for approved or equivalent
Rendered image is attached for reference only.
Tolerance in dimension will be ± 20 mm
MIRROR SIZE: 450mm (W) X 1200mm (H)
The thickness of Mirror Glass is 4MM. Back panel of the mirror is to be supported with 10mm thick pre laminated MDF Board. Outer side 40mm width edge cladding/support should be of 18mm thick Pre
laminated MDF. All the MDF board should have 0.8mm thick PVC edge band & also post form type pre-laminate to have smooth finish & aesthetic look of the mirror. The bottom portion of mirror to be fixed with
18mm thick MDF Batten of 40mm (Overall depth) projected to be fixed to cover-up the angle brackets. The mirror to be fixed on wall with the help of 4 nos. of heavy duty hook with suitable fixing arrangement
on back side and at bottom two angle bracket (25x25x1.2mm) to be fixed to withstand the load of Mirror.
Edge band/Laminate shall be pasted on through feed edge-banding machine with the help of hotmelt glue (Dorus KS217 / KLEBERIT 779.6). Edge band shall be pasted in such a way that it shall pass gravity pull
test for 7kg of load.
MDF Board is confirming to IS:14587:1998. Mirror to be supplied of approved make (Saint Gobain, Modicare or equivalent make).
Rendered image is attached for reference only.
KITCHEN CABINET:
Providing, Supplying & Placing wall mounted Overhead cabinet of 750mm Height, 350mm Depth and 750mm width (+-10mm) with two shutter for kitchen & one shelve.
Kitchen overhead cabinet shall be made in 18mm and 9mm thick pre laminated MDF confirming to IS:14587:1998. The pre laminate board laminate thickness is 1mm. All exposed edges shall be sealed with
2mm thick PVC Edge band and all non-exposed edges with PVC edge-band of 0.8mm thickness. PVC edge band shall be pasted on through feed edge-banding machine with the help of hot melt glue (Dorus
KS217 / KLEBERIT 779.6 or Equivalent make). Edge band shall be pasted in such a way that it shall pass gravity pull test for 7kg of load. There shall be provision of one fixed shelf at middle of the Cabinet to
make to two equal compartment. All the MDF board shall be joined by proper machine made interlocking arrangement for better strength, stability, durability. Complete unit to be supply in Knock Down
construction and to be assembled at site. Standard knock down fittings shall be used for assembly.
The shutters shall be of poly glossed acrylic finish (0.3mm thick poly acrylic Film pasted on 18mm thick pre laminated MDF). The Complete cabinet shall be made up of 18mm thick Pre laminated MDF. Back Panel
shall be of 9mm thick pre laminated MDF. Shutters shall be mounted on the side panel of the Cabinet with the help of soft close hinges. The Shutters shall have recessed type aluminium/brass handle at bottom
of the cabinet for easy opening/operating. The cabinet unit shall be grouted on wall with the help of 8 No. anchor fasteners and there shall be provision of M.S. Bracket fixed below (throughout) book shelf for
additional support. The L shape support bracket shall be made in 2mm thick CRCA sheet with 50mm flange size and duly powder coated as per IS: 13871:1993, 50 to 60 micron with properly processed through
seven tank pre-treatment process to avoid natural corrosion and depletion of surface. The Support bracket shall be grouted on wall with the help of wall plug and anchor bolts. The anchor fasteners shall be of
wuerth / Hilti / Fischer or equivalent make and to be installed as per instructions of site engineer.
Rendered image is attached for reference only.
Tolerance in dimension will be + 20 mm
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.12.29 23:38:40
MANDAL 5/6 IST
DINING TABLE 8 SEATER
Dining table of Size 2350 mm x 850 mm x750 mm. The Table top is made up of SS304 grade 1.2 mm thickness sheet of table size 2350 mm x 850 mm x 18 mm thick which is being cladded with the base of
BWR Grade plywood of IS 710 of Thickness 18MM by using approved make adhesive as per the standard requirement. The SS 304 of Jindal material ( SS sheet manufacturer should have valid MoU with Jindal)
Sheet should be cladded on all sides and also to be cladded on bottom side of Plywood up-to a required length/depth for smooth finish and aesthetic look of the Dining Table. There should not be any joints on the
MESS AND edges of the Table Top Sheet.
Under Structure - Legs foot & top support are made up of 75mm x 25 mm x 1.5 mm thick MS Pipe & the vertical member of the legs are made up of 50 mm x 25 mm x 1.5 mm thick MS Square/Rectangle pipe , Each 68 50,000.00 34,00,000.00
Cross members frame for the dining table is made up of 50 mm x 25 mm x 1.5 mm thick square pipe having three horizontal cross members placed at proportional space in the frame all the MS pipe used to be
The complete metal structure pre-treatment should be done with proper sequence of seven tank process and the powder coating thickness has to be in a range of 50 to 60 microns.
Tolerance in dimension will be ± 20 mm
Providing, supplying/fabricating and placing / installation in position Dining chair without arm with weighing capacity of 200 KG.
Overall chair size 520mm Width 850mm height, 530mm depth. Separate polypropylene seat and back fitted on tubular legs welded to seat support structure made in oval pipe of size 35mmx15mm with 1.6mm
wall thickness.
22 The leatherite upholstered seat made up of 12mm thick BWR Grade Plywood IS:710 with high density foam pasted on it. Size of seat is of 520mm width and 530mm depth and back rest is in tubular structure Each 544 4,900.00 26,65,600.00
and as the part of main frame.
The seat height should be 450mm from floor. The tubular leg is made up of M.S. tube of 22mm Diameter with all thickness of 1.6mm powder coated with epoxy polyester 50 to 60 micron provided with antiskid
Nylon cap fitted at bottom. The complete metal structure pre-treatment should be done with proper sequence of seven tank process.
The work should be complete as per indicative image, approved samples/shop drawings, specifications and direction of Engineer – In-charge.
Note:- Contractor will provide written warranty of individual items for 5 years from the date of completion of works. To ensure compliance of warranty, contractor will provide separate Bank Guarantee equivalent to 3%
of the awarded cost valid upto the warranty period of 05 years. Security Deposit will be released only after submission of separate Bank Guarantee.
RAJESH Digitally signed by RAJESH
DULALCHANDRA MANDAL
DULALCHANDRA Date: 2022.12.29 23:38:40
MANDAL 6/6 IST
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT_35.pdf
Tender Document
Integrity Pact_35.pdf
Tender Document
Scope of work _NIT 35.pdf
Tender Document
Instruction to Bidder for online Bid Submission.pdf
Tender Document
Unconditional Acceptance_35.pdf
Tender Document
GCC Contracting 2022.pdf
Tender Document
BOQ _NIT 35.pdf
Tender Document
Technical Specification with drawing_NIT 35.pdf
Tender Document
corrigendum-1252-NOTICE_NIT_35.pdf
pdf • 0.31 MB
corrigendum-1212-Corrigendum 06_NIT_35.pdf
pdf • 0.97 MB
corrigendum-1201-Corrigendum_05_NIT 35 - Copy.pdf
pdf • 0.59 MB
corrigendum-1200-Corrigendum _04_NIT 35.pdf
pdf • 0.59 MB
addendum-085b494e0419-Corrigendum _03_NIT 35.pdf
pdf • 0.66 MB
corrigendum-1185-Corrigendum _02_NIT 35.pdf
pdf • 0.59 MB
addendum-63e55f1bd2c2-Corrigendum 01_35.pdf
pdf • 0.59 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .