Construction of Pre-Cast Boundary Wall at Radhakrishna Vihar, Sec-6, CDA, Cuttack

Supplying of labour, T & P & macinaries for cleaning of small jungles , shurbs and other movable material replacement of unuseble debrises ,unuseble slabs above the said land area & levelling the surface by means of mechanical equipment i.e JCB as per direction of Engineer-in-charge.

Construction, Providing, Supplying and fixing precast SFRC fencing compound wall poles having finished dimension of 200mm x 200mm x 3000mm (long) made of M-30 grade concrete with 10 nos of 4mm dia HTPC (High Tension Pre Coated) wire, fixed in cast- in situ PCC M-30 concrete in foundation footing of size 600 mm dia 300 mm depth from top and P.C.C of proportion in C.C (1:3:6) of size 600mm dia 300mm depth at bottom inside the RCC Collar pipe of 600mm internal dia placed over a base of plain cement concrete of proportion with C.C(1:3:6) of size 680mm dia 100mm depth including excavating foundation pit for each pole in hard soil of size 680mm dia & 700mm depth including providing cast-in situ PCC of proportion in C.C (1:3:6) of size 1520mm length, 150mm width & 100mm depth below slab pannel including watering and curing for required days, along with supplying, fixing befitting precast SFRC slab having dimension of 2100mm (long) x 300mm (wide) x 50mm (thick) made with M-30 grade concrete having 4mm dia G.I wire 3 nos covering the top of the compound wall poles with a precast SFRC cover of size (300x300x150) mm in order to prevent the slab pannels from removing. All complete as a set to be measured in term of running metre including such precast SFRC top cover, slab, pole, including painting two coats of approved weather coat paint over a coat of primer and including all cost, conveyance, taxes, royalties of all materials and all labour, T&P, etc. complete as per the specification and direction of Engineer in charge.

Supplying,fitting & fixing of MS Gate made up with standard M.S. Section Duly Fabricated with one coat priming and including all cost, conveyance, taxes, royalties of all materials and all labour, T&P, etc. complete as per the specification and direction of Engineer in charge.