3064/08/E3

The following Job works are required to be carried out as repair are urgently required for Repair / Replacement Of UNSV parts & connected items including complete wiring of ICU AC plant panel at, Military Hospital Meerut Mil Stn. in GE (U) MEERUT CANTT :- (a) Dismantling electrical connection , removing out old defective parts & wiring including reassembling & renewal of defective parts/spares after rewiring with interlocking connection for the smooth functioning of complete panel all as specified and directed by Engineer-in-charge.. One Job -01 (b) Dismantling /taking Dismantling/ taking down burnt squirrel Cage Induction Motor of 25 HP capacity , 3 Phase, 415V, 1450 RPM of any make from its base and transporting the motor to the Civil workshop and back, re-fixing the motor at site after carrying out the following repairs/ renewals complete all as specified.-(i) Opening the side covers and removing the rotor and cutting/ removing the burnt coils / winding from stator. (ii) Cleaning the slots carefully. (iii) Rewinding the stator using super enamelled copper winding wire with same size, number of coils, number of turns / coils as per data acquired from the old burnt motor, including varnishing two coats, drying and reassembling the electric motor at site (iv) Testing the coils for their continuity and no current passing through the stator core. (v) Dynamic testing of the rotor and alignment of the main shaft and ensure that no imbalance vibrations.(vi) Re - assembling the rotor and connecting the end terminals to the terminal plate of the motor, closing the ends with side covers. (vii) Testing and commissioning the electric motor connecting to the electric supply to its full load by connecting the compressor. (viii) Renewal of Bolts, nuts and washers However filling of grease and oiling extra shall be deemed to be included in rates complete all as specified and directed by Engineer-in-charge. One Job (03 Motors rewinding of 25 H.P Capacity) Complete JOB -01 (c) Supply & fixing in repairs of 03 Nos single phase preventers VSP -2/VSP-3/VSP D-2 type , 415 Volt TP, all as specified and directed by Engineer-in-charge. One Job( for 03 Motors of 25 H.P Capacity) comp Job 01 (d) Supply & fixing in repairs of 03 Nos Spare coil for Contactor suitable for ML2 /ML3 type power contractor 3 pole , 415 v, 50 Hz, AC to match with the existing complete all as specified and directed by Engineer-in-charge. One Job (e) Supply & fixing in repairs 03 Nos Spare coil for Contactor suitable for ML4 type power contractor 3 pole , 415 v, 50 Hz, AC to match with the existing complete all as specified and directed by Engineer-in-charge. One Job (f) Supply & fixing in repairs (Renewal) of Contact Kit including contactor suitable for (05 Nos) ML3 type power contractor 3 pole , 415 v, 50 Hz, AC to match with the existing complete all as specified and directed by Engineer-in-charge. One Job (g) Supply & fixing in repairs (Renewal) of Contact Kit including contactor suitable for ML4 type power contractor 3 pole , 415 v, 50 Hz, AC to match with the existing complete all as specified and directed by Engineer-in-charge. One Job (h) Supply and refilling /topping up of refrigerant M-22 gas for 3 X 21TR central AC plant 61 Kg . One Job (i) Transportation & Labour Charges for complete above work. One Job Certificate :- (i) It is certified that the funds are available in CH 87/479/01. (ii) Old material will be hand over to contractor against credit amount. (iii) Approx amount Rs = 210000.00 Including GST

Jain Traders