PROVN OF COMPOUND WALL AT BLDG NO P-123/01 TO 124/01 AT RICHEN ENCLAVE AND PROVN OF STORM WATER DRAIN AT CENTENARY PARK OF 1 TTR OF HQ 1STC UNDER GE (WEST) JABALPUR

Amount

Excavation over areas not exceeding 1.50 m in depth and getting out in Soft / Loose soil complete all as specified and as directed.

All as described in serial item No. 01 above, but exc 1.5m not exc 3m in depth.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft / Loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M & L for PCC 1:2:4, Type B-1 [using 20 mm graded granite stone aggregate] in surface channels and drains including forming fair finished drain or channel of 300 mm inner girth using extra cement including forms, moulds, mitred / stooped ends complete all as specified and as directed.

M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

M & L for PCC 1:3:6, Type C-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) using 20mm grades stone aggregate as in foundation including raft footings foundation beams, plinth beams, base of columns etc basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed

M&L for RCC M-25 (Design Mix) using 20mm grades stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like any thickness above top of footings including attached pilasters and buttresses etc complete all as specified and directed

M&L for RCC M-25 (Design Mix) using 20mm grades stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and directed

M&L for RCC M-25 (Design Mix) using 20mm grades stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed

M & L for brick work with sub class "B" bricks, old size bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

Use and waste of form work to sides of concrete foundation, footings, bases of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter; for rough finished surfaces complete all as specified and as directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders,bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floor and beam etc. for rough finished surfaces complete all as specified and as directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns of any shape / cross section for fair finished surfaces of concrete complete all as specified and as directed.

Use and waste of form work to faces of walls, retaining walls , abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to batter complete all as specified and as directed.

M&L for Mild steel angle iron conforming to Fe-290 or Fe-165 as in posts and struts including embeding in concrete, notching for wire, cutting tops to shape, drilling holes, bolting etc. complete all as specified and as directed.

S & F galvanised, 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-2990 ( Gde E-165).

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L reinforcement using TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

S & F reinforcement using TMT steel bars of 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

S & F reinforcement using TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:4, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, surfaces finished fair and even complete all as specified and as directed.

M & L for preparation of newly plastered surface of wall and applying two coat of cement based paint over a coat of alkali resistant priming paint complete all as specified and as directed.

M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed.

M/S RAJ BUILDERS

kamakshi construction

ELITE ENGINEERING COMPANY

chandra builders

Tiki Water proofing Co

LAL SINGH & SONS

M/S Modern builders

ANAMIKA CONSTRUCTION

B G PANDEY AND BROTHERS