SPECIAL REPARIS TO BOUNDARY WALL AT 6 AFH AT AFAC COIMBATORE

Amount

Demolition of Concrete of any description and in any position not otherwise specifically provided for

M&L for Reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded stone aggregate) in Columns, pillars, piers,posts and struts

S&F flat formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply & fix 610 mm dia CONSEC-ZAL super Razor punched Barb Tape (SRBT) Aluminium base helix coil with and including necessary GI fixing clips for securing complete all as specified and as directed with following specifications :- (i) Dia of coil (unstretcherd)- 610 mm (ii) No.of circles -51 turn per coil (iii) Weight of each coil with hessain pack- 8.50 Kg (+0.50Kg) (iv) Coverage per coil- 8 RM (v) Central core wire - Made from 2.60 mm dia GI-HTSS wire as per IS-4454 galvanised as per IS-2629 (vi) Razor punched strip Razer punched tape is CONSEC-ZAL stell comprising of aluminium base with zinc alloy@150 gm/Sqm conforming to ASTM-A 792/A-792M with additional primer treated of Epoxy/ polyuretherane and final paint top coat of calicified green shade (BSL-139) by Hot dipping process all as specified and as directed. Note- Runing lenght of the wall shall be measured for the payment purpose.

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer over the new steel surfaces of any description, over 10cm in width or girth,not otherwise described

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer over the new steel surfaces of any description, n exc 10cm in width or girth,not otherwise described

M&L for applying one coat of synthetic enamel paint on the old steel surfaces of any description, over 10cm in width or girth,not otherwise described includinging preparation of surfaces.

Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc

Demolition of Brickwork or stone/boulder masonry, built incement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4

M&L for Rendering with WPC in CM 1:4, 15mm thick on othe than fair faces of brick work or concrete surfaces all as specified and directed. Note : WPC shall be measured and paid separately

M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

Supply only integral water proofing compund

Sri ASK Constructions

VIJAYA ENTERPRISES

SEMBA ELECTRICALS

SIVAN BUILDERS

MSR ENTERPRISES

eurekaenterprises

TECKXPERT ENTERPRISES