PERIODICAL SERVICES AT B AND C COLONY, RAMNAGAR, COLONEL POINT, NECKLACE AREA, GE OFFICE COMPLEX AND SURAKSHA AWAS, UNDER GE (I) RnD PASHAN, PUNE

Material and labour for preparation of old plastered or unplastered surfaces and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces and applying two coats of oil bound distemper over a coat of interior primer on wall surfaces complete all as specified and directed.

Material and labour for applying 1mm thick wall care putty on wall surfaces complete all as specified and directed.

Material and Labour for complete removal of existing treatment and applying two coat of oil bound distemper over a coat of alkali resistant primer on wall surfaces complete all as specified and as directed.

Material and Labour for preparation of old surfaces (plastereed or unplastered) of walls including cornices, pilasters etc., including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots, crack filling with crack fill paste/order of Asian paints or equivalent make and make good smoothen surfaces by sand paper and appying one coat of acrylic water based exterior grade primer @0.9lit (undiluted)/10 Sqm diluted with water in 1:1/7 ratio to be applied with fully automatic airless spray machine of paint application with aflow speed of 1 litre per minute having a pressure of 3200 PSI and two coats water based premium acrylic platina long life exterior emulsion (Berger Paint) or equivalent make of approved color with silicon additive & color stay technology, exellent dirt pick up resistance with low VOC less than 50 grams/litre as per the LEEDS specifications, anti Algae properties in two coats @ 1.79 litre(undiluted)/10 Sqm diluted with water as per manufactureres instructions applied over priming coat with fully automatic airless spray machine of paint application with aflow speed of 1 litre per minute having a pressure of 3200 allow 6-8 hours to dry the surfaces in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and as directed. Notes for smart periodicals (a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed (b) The contractor shall submit MoU between tenderer and manufacturer of paints and their authorized applicator before commencement of work. (c) Cost of scaffolding at any height shall be included in the quoted rate. (d) Preparation of plastered or unplastered surface or removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, fascias, parapets etc shall be done by using mechanial sander with internal dust extraction system for clean environment certified by the manufacturer. After the prepartion of surface written approval shall be obtained from GE before applying primer and further treatment/ coats. Bldg wise stage passing register shall be maintained. (e) Finishes ie cement based paint, acrylic water based exterior grade primer,premium acrylic smooth exterior emulsion etc to walls, ceiling, chajjas, fins, fascias, prapets etc shall be applied using airlessspray technology and capable of operating single spray gun with a suitable hose length. the spray machine should be of reputed manufacturer with pro-guard technology and capability of tracking pressure as well as paint and primer usage (f) This equipment shall be certified by approved manufacturer. (g) The accessories for applying the finishes shall be spray in hard to reach areas and penetration of finishes on the surface so as to achieve uniform application and quality surface finish. (h) The contractor shall submit approved company generated 05 years warranty card at the time of submission final bill.

Material and labour for preparation of old plastered or unplastered surfaces of ceiling and applying two coats of oil bound distemper on ceiling surfaces complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and Labour for rendering 15mm thick in two layers with first layer of thickness 10mm thick in CM 1:6 on of fair faces of brick masonry or on concrete surfaces and second layer of thickness 5mm thick in CM 1:4 with integral water proofing compound ( Note: WPC shall be measured and paid seperately) complete all as specified and as directed.

Material and Labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement complete all as specified and as directed.

Material and Labour for rendering 5mm thick cement plaster on cement concrete surface as in ceiling in CM 1:3 finished even and fair without using extra cement complete all as specified and as directed.