Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC | ₹22.9 L Quoted ₹23.2 L | L1 | Accepted-AOC L1 |
| 2 | L2₹25.4 L+₹2.2 L (9.53%)Rejected-Finance | ₹25.4 L+₹2.2 L (9.53%) | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹29.8 L+₹6.6 L (28.3%)Rejected-Finance 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | ₹29.8 L+₹6.6 L (28.3%) | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹30.7 L+₹7.4 L (32.1%)Rejected-Finance | ₹30.7 L+₹7.4 L (32.1%) | L4 | Rejected-Finance Other than L1 |
| 5 | L5₹31.8 L+₹8.6 L (37.2%)Rejected-Finance H NO 1237 PANA PAPOSIAN NARELA NORTH WEST DELHI NEW DELHI 110 040 | NEW DELHI | NORTH WEST DELHI | DELHI | 110040 | ₹31.8 L+₹8.6 L (37.2%) | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/S HARINDER SINGH L5 | MOHIT ENTERPRISES L3 | B N ARORA AND SONS L6 | RAM BAKSH DAYAL CHAND L7 | M/S RK Builders L4 | M/S Parshant Associates L2 | M/s R P Enterprises L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Complete removing of existing treatment by scrapping with Wall sander:-L-01/H-01 (Having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc, by skilled labour complete all as specified and directed by Engr-in-charge. | 5,000 | Sqm | 44 ₹2,20,000 | 22 ₹1,10,000 | 12 ₹60,000 | 9 ₹45,000 | 10 ₹50,000 | 10 ₹50,000 | 5 ₹25,000 Lowest |
| 2.00 | M&L for waterproof cement based putty @ 1Kg (undiluted) per sq mtr of average thickness 1mm of over the plastered/ old painted wall after scrapping by skilled labour complete all as specified and directed by Engr-in-charge.
Step 1 :- Mix the putty powder by adding 40-50% water and mix it with putty mixer (Putty mixer with min 1400W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 Kg putty per minute).
Step 2 :- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Spray Machine (Model: EH 230DI) or equivalent having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041".
Step-3 : Allow 6-8 hrs time of dry the putty surface. | 5,000 | Sqm | 44 ₹2,20,000 | 32 ₹1,60,000 | 35 ₹1,75,000 | 39 ₹1,95,000 | 15 ₹75,000 Lowest | 17 ₹85,000 | 15 ₹75,000 Lowest |
| 3.00 | M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of traching pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach area and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed by Engr-in-charge. Note:-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. | 5,000 | Sqm | 44 ₹2,20,000 | 32 ₹1,60,000 | 45 ₹2,25,000 | 49 ₹2,45,000 | 30 ₹1,50,000 Lowest | 30 ₹1,50,000 Lowest | 30 ₹1,50,000 Lowest |
| 4.00 | M&L for preparing old surface of walls, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying two coat of distemper oil emulsion (Washable oil bound distemper) on wall including cornices, pilasters complete all as specified and directed by Engr-in-charge. | 3,000 | Sqm | 44 ₹1,32,000 | 32 ₹96,000 | 70 ₹2,10,000 | 69 ₹2,07,000 | 29 ₹87,000 | 20 ₹60,000 Lowest | 35 ₹1,05,000 |
| 5.00 | M&L for preparing old surface of walls, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying one coat of distemper oil emulsion (Washable oil bound distemper) on wall including cornices, pilasters complete all as specified and directed by Engr-in-charge. | 1,000 | Sqm | 44 ₹44,000 | 22 ₹22,000 | 40 ₹40,000 | 39 ₹39,000 | 25 ₹25,000 | 10 ₹10,000 Lowest | 30 ₹30,000 |
| 6.00 | M&L for preparing old surface of ceiling, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying one coat of distemper oil emulsion (Washable oil bound distemper) on ceiling including cornices, pilasters complete all as specified and directed by Engr-in-charge. | 4,000 | Sqm | 44 ₹1,76,000 | 22 ₹88,000 | 40 ₹1,60,000 | 39 ₹1,56,000 | 30 ₹1,20,000 | 15 ₹60,000 Lowest | 20 ₹80,000 |
| 7.00 | M&L for preparing old surface of walls plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying two coat of white wash complete all as specified and directed by Engr-in-charge. | 500 | Sqm | 44 ₹22,000 | 22 ₹11,000 | 17 ₹8,500 | 19 ₹9,500 | 16 ₹8,000 | 10 ₹5,000 Lowest | 15 ₹7,500 |
| 8.00 | M&L for preparation of old plastered or un-plastered surfaces of ceiling & applying two coats of white wash complete all as specified and directed by Engr-in-charge. | 500 | Sqm | 44 ₹22,000 | 22 ₹11,000 | 17 ₹8,500 | 19 ₹9,500 | 16 ₹8,000 | 15 ₹7,500 Lowest | 15 ₹7,500 Lowest |
| 9.00 | M&L for preparation of old painted surface of wood or wood based materials of any description not otherwise described over 10cm girth or width & applying one coat of synthetic enamel paint 1st quality complete all as specified and directed by Engr-in-charge. | 1,100 | Sqm | 44 ₹48,400 | 52 ₹57,200 | 40 ₹44,000 | 39 ₹42,900 | 40 ₹44,000 | 30 ₹33,000 Lowest | 45 ₹49,500 |
| 10.00 | M&L for preparing old painted surfaces of steel or iron of materials of any description not otherwise described over 10cm girth or width & applying one coat of synthetic enamel paint 1st quality complete all as specified and directed by Engr-in-charge. | 600 | Sqm | 44 ₹26,400 | 52 ₹31,200 | 40 ₹24,000 | 39 ₹23,400 | 50 ₹30,000 | 28 ₹16,800 Lowest | 45 ₹27,000 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
24 Jun 2025, 6:00 pmClosed
GE AF Tughlakabad
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
WELCOME MAINTENANCE AND PERIODICAL SERVICES BY USING SMART PERIODICAL METHODOLOGY TO CERTAIN BLDGS AND REPAIR TO CHAJJA, PLASTER, WALL AND CONNECTED B/R ITEMS IN CERTAIN BLDGS AT AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD
2025_MES_708848_1
GE/TKD-12/2025-26
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF Tughlakabad
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹0
₹80,000
Yes
13 Oct 2025
27 May 2025
26 Jun 2025
28 May 2025
24 Jun 2025
11 Jun 2025
Amount
Complete removing of existing treatment by scrapping with Wall sander:-L-01/H-01 (Having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc, by skilled labour complete all as specified and directed by Engr-in-charge.
M&L for waterproof cement based putty @ 1Kg (undiluted) per sq mtr of average thickness 1mm of over the plastered/ old painted wall after scrapping by skilled labour complete all as specified and directed by Engr-in-charge. Step 1 :- Mix the putty powder by adding 40-50% water and mix it with putty mixer (Putty mixer with min 1400W power having mixer rod of industrial steel grade 45 with the mixing capacity of min 2.5 Kg putty per minute). Step 2 :- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Spray Machine (Model: EH 230DI) or equivalent having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041". Step-3 : Allow 6-8 hrs time of dry the putty surface.
M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of traching pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach area and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed by Engr-in-charge. Note:-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
M&L for preparing old surface of walls, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying two coat of distemper oil emulsion (Washable oil bound distemper) on wall including cornices, pilasters complete all as specified and directed by Engr-in-charge.
M&L for preparing old surface of walls, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying one coat of distemper oil emulsion (Washable oil bound distemper) on wall including cornices, pilasters complete all as specified and directed by Engr-in-charge.
M&L for preparing old surface of ceiling, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying one coat of distemper oil emulsion (Washable oil bound distemper) on ceiling including cornices, pilasters complete all as specified and directed by Engr-in-charge.
M&L for preparing old surface of walls plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying two coat of white wash complete all as specified and directed by Engr-in-charge.
M&L for preparation of old plastered or un-plastered surfaces of ceiling & applying two coats of white wash complete all as specified and directed by Engr-in-charge.
M&L for preparation of old painted surface of wood or wood based materials of any description not otherwise described over 10cm girth or width & applying one coat of synthetic enamel paint 1st quality complete all as specified and directed by Engr-in-charge.
M&L for preparing old painted surfaces of steel or iron of materials of any description not otherwise described over 10cm girth or width & applying one coat of synthetic enamel paint 1st quality complete all as specified and directed by Engr-in-charge.
M&L for complete removal of existing treatment on walls/chajjas and applying two coat of cement based paint upto four storey bldgs including necessary scaffolding/arrangement complete all as specified and directed by Engr-in-charge.
M&L for preparation of old surfaces of brick/concrete wall surface by brushing, washing and applying one coat of Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-charge.
Taking down cement plaster on brick wall including racking out joints, hacking for key scrubbing down with water complete all as specified and directed by Engr-in-charge.
M&L for rendering 15 mm thick in CM (1:6) on stone masonry surfaces including patches or on fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for 15mm thick rendering in cement mortar (1:4) to stone masonry wall surfaces including patches or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for rendering 10 mm thick in CM (1:3) as on concrete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-charge.
M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed by Engr-in-charge.
M&L for preparation of newly plastered surfaces & applying three coats of white wash on ceilings complete all as specified and directed by Engr-in-charge.
M&L for filling voids in masonry using chemical emulsion @ one ltr per hole at a distance of 300mm center to centre (Apart) including drilling holes at 45 degree and re-plugging the existing floor etc complete all as specified and directed by Engr-in-charge.
M&L for treatment at the points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ half ltr per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to center and sealing the same complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-charge.
S&F 105x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engr-in-charge.
S&F 125x60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engr-in-charge.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and directed by Engr-in-charge.
M&L for flush shutter 40 mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed by Engr-in-charge.
S&F 35mm thick factory made IInd Class Hard wood panelled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003 (Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engr-in-charge.
S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003 (Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engr-in-charge.
S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work or aluminium door, complete all as specified and directed by Engr-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge.
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed by Engr-in-charge.
S&F 125 mm size aluminium handles, cast type anodised complete all as specified and directed by Engr-in-charge.
S&F 125 mm long Aluminium tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge.
S&F 125 mm long Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge.
S&F 125 mm size mild steel, oval type handles, stove enamelled black anodised complete all as specified and directed by Engr-in-charge.
S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed by Engr-in-charge.
S&F (piano) type hinges mild steel bright finish as electrogalvised 30mm width of flaps (with open) complete all as specified and directed by Engr-in-charge.
S&F fixed galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples in door and steel window complete all as specified and directed by Engr-in-charge.
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares complete all as specified and directed by Engr-in-charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material outside of Defence Land complete all as specified and directed by Engr-in-charge.
M&L for 10 mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed by Engr-in-charge.
M&L for Glazed ceramic coloured tiles on vertical surfaces 600x300x7mm/ 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-charge.
M&L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed by Engr-in-charge.
M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-charge.
M&L for Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed by Engr-in-charge.
M&L for non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed by Engr-in-charge.
M&L for Vitrified ceramic light shade coloured tiles 10mm thick area of each tiles not exc 0.36 sqm, in floor etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of the tile
M&L for Vitrified ceramic light shade coloured tiles 10mm thick area of each tiles not exc 0.36 sqm, on vertical surface & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of the tile complete all as specified and directed by Engr-in-charge.
M&L for WPT in sunken floors as described here under:- (i) Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement. (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 3 mm thick and weighing not less than 3.0 kg/ sqm of make as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusible finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a overlap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid separately
M&L for PCC ( 1:5:10) type E-2 using brick koba aggregate for filled up the sunken portion complete all as specified and directed by Engr-in-charge.
Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-charge.
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-charge.
S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engr-in-charge.
S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engr-in-charge.
S&F in repairs, vitreous China wash hand basin including pedestal, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 32 mm dia waste coupling and 32mm bore Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement including CI brackets complete all as specified and directed by Engr-in-charge.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with "P" or "S" Trap front or back inlet fixing bolts, PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making all necessary connection complete all as specified and directed by Engr-in-charge.
S&F in repair PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge.
S&F in repairs plastic water closet seat white colour, closed pattern with flat bottom and cover with mild steel CP or aluminium hinge device etc complete all as specified and directed by Engr-in-charge.
S&F in repair 15 mm dia stop cock fancy type, chromium plated with long shank and cup (concealed type) for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore fancy type bib tap cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore mixture valve chromium plated fancy type for wall in two/three pin fixed to iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore mixture valve chromium plated fancy type for wash hand basin centre hole fixed to iron pipe complete all as specified and as directed.
S&F in repairs of CP sink mixer telephonic type mixer cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down complete all as specified and directed by Engr-in-charge.
S&F in repairs chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repairs Soap dish, embedded in the wall approximate size 160x160x90mm complete all as specified and directed by Engr-in-charge.
S&F in repair shower rose 125 mm size brass chromium plated with swivel joints including fixing steel pipe or unions complete all as specified and directed by Engr-in-charge.
S&F in repairs stainless steel Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed by Engr-in-charge.
S&F in repairs of Health Faucet with 1.5mtr long SS tube and hook complete all as specified and directed by Engr-in-charge.
S&F in repairs flushing jet CP for pedestal pattern WC incl flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1150 mm long b/w dia & fixed complete all as specified and directed by Engr-in-charge.
S&F in repair toilet paper holder of vitreous china fixed ro walls with CP brass screw white colour complete all as specified and directed by Engr-in-charge.
S&F in repairs 25 mm dia fancy CP curtain rod with bracket, knob and screw with necessary all fittings complete all as specified and directed by Engr-in-charge.
S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-charge.
S&F PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed by Engr-in-charge.
Dismantling wrought iron or MS work of any description and in any position complete all as specified and directed by Engr-in-charge.
S&F mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-charge.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engr-in-charge.
M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge.
Dismantling loose concrete cover of RCC columns, beams, Roof projection, slabs, Chajjas and the like at different bldgs as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admiture over steel mesh and providing 25 mm thick (average thickness) guniting mix using 1 part of ordinary portland cement 53 grade and 2 parts of river sand mixed with adhesive/admixture at the rate as per manufactures instruction or 2% by wt of cement all as directed with pressure of 2 to 2.5 kgs per sqm by guniting machine including necessary padding, steel scaffolding and shuttering for working platform/formwork etc including removing of loose cement concrete debris outside of defence land. the surface shall be finished with 15mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including removing debris outside defence land complete all as specified and directed by Engr-in-charge.
M&L for formwork to soffits of suspended slab such as roof slab, roof projection, floor slab, landing and similar work, not exceeding 200 mm thickness (horizontal or sloping) with fair finished surfaces of concrete complete all as specified and directed by Engr-in-charge.
M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges with fair finished surfaces of concrete complete all as specified and directed by Engr-in-charge.
M&L for reinforced cement concrete type B0 (1:2:4) (nominal mix) using 12.50 mm graded stone aggregate as in slab and shelves supported on wall, beams and columns in floors, roofs and landings etc complete all as specified and directed by Engr-in-charge.
M&L for reinforced cement concrete type B0 (1:2:4) (nominal mix) using 12.50 mm graded stone aggregate as in Chajjas, lintel etc complete all as specified and directed by Engr-in-charge.
M&L for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed by Engr-in-charge.
M&L for TMT mild steel bars 6 mm to 8 mm dia cut to length bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire annealed 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-charge.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed by Engr-in-charge.
M&L rendering 10 mm thick in CM (1:6) on brick masonry surfaces on fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for 10-15 mm thick polymer modified readymix cement based plaster in ratio (1:4) on brick or concrete surface etc on wall finished even and fair without using extra cement all as per specifications and direction of the Engineer-in-charge
M&L for complete removal of existing treatment on walls, chajjas etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-charge.
M&L for 75 mm thick PCC (1:3:6), C2 using 40mm aggregate as in sub base complete all as specified and directed by Engr-in-charge.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.
M&L Machine Pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS- 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed by Engr-in-charge.
Dismantling and refixing Machine Pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS- 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed by Engr-in-charge.
M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-charge.
M&L 25 mm thick chequered cement concrete coloured tiles glossy finished of any shape any size set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified and directed by Engr-in-charge.
Dismantling wrought iron or MS work of any description and in any position complete all as specified and directed by Engr-in-charge.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-charge.
S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow tubes/pipe, or flat sections) including distance pieces, cleats etc confirming to Fe 410 -W (Gde E- 250) complete all as specified and directed by Engr-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
S&F Colored Polycarbonate Sheets 6mm thick (multi wall) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
M/S Parshant Associates (BID ID -3326392)
MOHIT ENTERPRISES (BID ID -3326310)
M/S RK Builders (BID ID -3325849)
M/S HARINDER SINGH (BID ID -3325820)
B N ARORA AND SONS (BID ID -3326585)
RAM BAKSH DAYAL CHAND (BID ID -3326720)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .