REPAIRS TO PLASTERING, POINTING, FLOORING, CHEQUERED TILES ETC OF CERTAIN BUILDINGS UNDER AGE B/R-III AREA AT DSSC WELLINGTON.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing unserviceable debris off the premises complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors for levelling of and pavings n.exc 15 cm thickness including floor finish complete all as specified and as directed.

M & L for providing 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in floor finishing cement concrete surfaces even & smooth using extra cement.complete all as specified and as directed.

M & L for providing 40 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded aggregate) as in floor, finishing cement concrete surfaces even & smooth using extra cement complete all as specified and directed.

M & L for providing 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in subbase of flooring complete all as specified and as directed.

M & L for providing 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in subbase of flooring complete all as specified and as directed.

M & L for providing 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection and hard standing, finishing the surface even and fair complete all as specified and as directed.

M & L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm in vertical surfaces like skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering/ backing coat 10 mm thick in CM (1:3) complete all as specified and as directed.

M & L for Vitrified Ceramic tiles light shade10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm in vertical surfaces like skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering/ backing coat 10 mm thick in CM (1:3) complete all as specified and as directed.

M & L for Granite tile 10 mm thick machine cut, in flooring, rounding edges , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 15mm thick screed bed in CM (1 :4) complete all as specified and as directed.

M & L for Granite tile 10 mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including rendering as backing coat 10 mm thick in CM 1 :3 complete all as specified and as directed.

M & L for Granite stone slab in flooring of approved colour 16-18 mm thick machine cut, rounding edges, leather finished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in CM (1 :4) complete all as specified and as directed.

M & L for Granite stone slab in skirting/dado of approved colour 16-18 mm thick machine cut, rounding edges, leather finished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including rendering/ backing coat 15 mm thick in CM (1:3) complete all as specified and as directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm screed bed in CM (1:6) complete all as specified and as directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm screed bed in CM (1:6) complete all as specified and as directed.

M & L for coloured glazed ceramic coloured tiles 350/250 x 7 mm / 450/350 x 7 mm thick, as in dados/ skirting etc., set jointed in cement slurry & pointed in white cement or coloured cement to match, laid over and including rendering as backing coat 10 mm thick in CM (1 :3) complete all as specified and as directed.

S & F for factory made machine pressed chequered cement concrete coloured tiles of size 300 x 300 x 22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors , laid over and including 20 mm thick screed bed in CM (1 :4) complete all as specified and as directed.

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, laid over and including 50mm thick crushed stone sand (M sand) cushioning complete all as specified and as directed.

M & L for heavy duty vitrified coloured tiles of size 600 x 600 x 16 mm thick, light shade stonex finish (square/rectangular) polished in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed 20mm thick in CM (1:4) complete all as specified and as directed.

M & L for heavy duty vitrified coloured tiles of size 1200 x 300 x 16 mm / 1200 x 200 x 16mm thick, light shade stonex finish (square/rectangular) polished, as in steps, riser etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed 15mm thick in CM (1:4) complete all as specified and as directed.

M & L for heavy duty vitrified coloured tiles of size 600 x 600 x 16mm thick, dark shade stonex finish (square/rectangular) polished in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed 20mm thick in CM (1:4) complete all as specified and as directed.

M & L for heavy duty vitrified coloured tiles of size 1200 x 300 x 16mm / 1200 x 200 x 16mm thick, dark shade stonex finish (square/rectangular) polished, as in steps, riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed 15mm thick in CM (1:4) complete all as specfied and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M & L for Precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in cement mortar (1:6) complete all as specified and as directed.

M & L walling of random rubble uncoursed well bonded bedded and solidly hearted built in CM (1:6) and pointed the dressed surface with same mortar as the work process complete all as specified and as directed.

Description all as per item No 28 above but except stone complete all as specified and as directed Note : Serviceable stone obtained from item No 26 shall be reused.

M & L for keyed pointing to random or polygonal rubble uncoursed or brought upto courses in CM (1:4) complete all as specified and as directed.

Racking out joints and pointing to random rubble polygonal rubble uncoursed stone work in old retaining wall in CM (1:4) etc., complete all as specified and as directed.

M & L for providing cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate), as in coping including necessary form work complete all as specified and as directed.

Removing of bushes, shurbs and vegetation from stone masonary retaining walls at any height upto 8.00m and making the surface clean by removing wastes complete all as specified and as directed.

M & L for preparing plastered or unplastered old surfaces of walls and applying two coats of cement base paint any shade as approved complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., and removing unserviceable debris off the premises all as specified and as directed.

M & L for rendering 15 mm thick in CM (1:4) mixed with WPC as per manufacturer's instruction on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as specified and as directed. Note : WPC shall be measured and paid separately.

M & L for rendering 10 mm thick in CM (1:6) mixed with WPC as per manufacturer's instruction on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as specified and as directed. Note : WPC shall be measured and paid separately.

M & L for preparation of new decorated surfaces and applying two coats of distemper oil emulsion over a coat of putty finish and a coat of alkaline resistant primer complete all as specified and as directed.

M & L for preparation of plastered surfaces/ stone wall and applying two coats of antifungal paint over a coat of primer on wall including complete removing of existing treatment complete all as specified and as directed.

Supply only of liquid water proofing compound complete all as specified and as directed.

S & F in repairs Vitreous China Squatting pan "Orissa pattern" long pan of size 580 x 440 mm white , with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor surface all as specified and as directed.

S & F in repairs Vitreous china wash down water closet pan (pedestal pattern) white including all accessories and connection complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet, white, closed pattern with flat bottom and soft close seat cover with mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) with and including cistern complete all as specified and as directed. Make: Parryware, (Cascade Classic) Cat No: C0217 (S-110) for Closet , Cat No : E8300 for Soft close seat cover, Cat No : 0766 for Cistern Set including dual flush fittings or equivalent in Prayag/ Jaquar/ Cera/ Hindware

S & F in repairs vitreous china half stall urinal white complete including providing CP waiste coupling and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and as directed. Make: Parryware, Cat No: C0575 (Magnum) for Half Stall Urinal or equivalent in Prayag/ Cera/ Hindware/ Jaquar

S & F in repairs urinal magnum half stall type including spreader, CP waste coupling all as specified and as directed. Make : Parryware (Popular), Cat No : C 8097 integrated EFC AC with power source (Auto Flush) or equivalent in Prayag/ Cera/ Hindware/ Jaquar

S & F in repairs urinal magnum half stall type including spreader without auto flush all as specified and as directed.

S & F in repairs of sensors assembly for auto flush and making good the disturbed surfaces complete all as specified and as directed. Make : Parryware, Urinal code : EFS N-PCB(DC) Assy new or equivalent in Jaquar/ Cera/ Prayag/ Hindware

S & F in repairs of sensors of valve assembly for auto flush and making good the disturbed surfaces complete all as specified and as directed. Make : Parryware, Urinal code : SMART EFS SOLENOID VALVE Assy or equivalent in Jaquar/ Cera/ Prayag/ Hindware

S & F in repairs of sensors of power assembly for auto flush and making good the disturbed surfaces complete all as specified and as directed. Make : Parryware, Urinal code : C741199 Assy power sourCe for SMART HAWNE TAP A/C or equivalent in Jaquar/ Cera/ Prayag/ Hindware

S & F in repairs WHB round bowl coloured counter top type of size 550 x 445 mm of Make : Parryware, Cat No : C0431 or equivalent in Prayag/ Cera/ Jaquar/ Hindware, with pillar tap of fancy type of Make : Jaquar, Cat No : KUB-35001F or equivalent in Prayag/ Cera/ Parryware/ Hindware mounted over 18 mm thick polished granite slab complete all as specified and directed. Note : Granite work shall be measured and paid separately.

S & F in repairs vitreous China clay WHB flat back of size 550 x 400 mm including PVC waste pipe 32 mm dia, CP waste coupling brackets etc complete all as specified and directed.

S & F in repairs stainless sink 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs made of stainless steel 1 mm thick for kitchen plate rack , with plug , washers, fixing on wall, overall size 900 mm x1000 mm complete as specified and as directed.

S & F in repairs 10 litres capacity PVC valveless , syphonic action type, flushing cistern low level, white , with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S & F in repairs Health faucet with flexible tube 1 Mtr long complete all as specified and as directed.

S & F in repairs CP multi bip taps complete all as specified and as directed.

S & F in repairs CP Health faucet / Hand shower holder complete all as specified and as directed.

S & F in repairs Hand shower with flexible tube 1/1.50 Mtr long complete all as specified and as directed.

S & F in repairs superior quality push button taps of cast copper alloy CP, screwed for 15 mm bore iron pipe complete all as specified and as directed. Make : Parryware, Cat No : T9951A1 or equivalent in Prayag/ Jaquar/ Cera/ Hindware

S & F in repairs 15 mm bore fancy type Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs 15 mm bore fancy type Long body Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs 15 mm bore Fancy type Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repairs 15 mm bore fancy type Angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repairs 15 mm bore fancy type Pillar taps cast copper alloy, fancy type, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and as directed.

S & F in repairs CP elbow action pillar cock, weight should not be less than 500 gms, ISI marked all as specified and as directed.

S & F in repairs CP toilet paper holder fixed to wall with CP brass screws complete all as specified and as directed. Make :Jaquar, Cat No : AKB 35751 or equivalent in Cera/ Prayag/ Hindware

S & F in repairs stainless steel soap dish complete all as specified and as directed. Make : Jaquar, Cat No : AEC 1131 or equivalent in Parryware/ Cera/ Prayag

S & F in repairs CP towel rail 600 mm long complete all as specified and as directed. Make : Jaquar, Cat No : ACN- 1111 N or equivalent in Cera / Parryware /Prayag

S & F in repairs CP towel ring square complete all as specified and as directed. Make : Jaquar, Cat No : 1121 N or equivalent in Cera/ Parryware/ Prayag

S & F in repairs Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union complete all as specified and as directed.

S & F in repairs Chromium plated shower rod 300/450 mm long, including fixing to steel pipe and all accessories complete all as specified and as directed.

S & F in repairs corner racks / shelves complete all as specified and as directed. Make: Jaquar, Cat No : ACN 1173 or equivalent in Cera/ Prayag/ Parryware/ Hindware

S & F in repairs 3-in -1 Wall CP mixer for mixing hot & cold water , screwed for iron pipe or for brass ferrule of 15 mm bore connection complete all as specified and directed.

S & F in repairs 2-in -1 Basin CP mixer for mixing hot & cold water , screwed for iron pipe or for brass ferrule of 15 mm bore connection complete all as specified and directed.

S & F in repairs CP Gratings 150 mm dia complete all as specified and directed.

S & F in repairs 32/40 mm dia Waste pipe complete all as specified and directed.

S & F in repairs PVC connection 60 mm long complete all as specified and directed.

S & F in repairs LED mirror with touch switch of size 800 x 600 mm with 5 mm thick glass mirror with touch switch for LED light, light weight aluminium back box carrying entire unit, double coat for production and longevity and silver plating on the back for better reflection all as specified and directed. Make : Cera, Cat No : B3530103 or equivalent in Philips/ Jaquar

S & F in repairs PVC Cabinet Mirror size 450 mm x 300 mm complete all as specified and directed. Make : Prayag/ Cera/ Jaquar

S & F in repairs looking mirror of any size using 6 mm thick mirror edges rounded fixed with SS clips all as specified including necessary frame work in stainless tubes complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal / Aluminium frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed.

S & F in repairs 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty / Aluminium rubber beading in squares exc 0.5 Sqm in each pane complete all as specified and directed.

S & F in repairs 4 mm thick sheet glass ordinary quality and glazing wooden fillets / rubber beading in squares complete all as specified and as directed.

S & F in repairs 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S & F in repairs door closer hydraulically regulated, aluminium cast body designation No. 2, universal type, suitable for door shutters including all accessories all as specified and as directed.

S & F in repairs brass mortice lock vertical type size 100 /150mm 4/6 levers all as specified and directed.

S & F in repairs UPVC door lock vertical type any size four lever with two key all as specified and directed.

S & F in repairs galvanised steel wiremesh 1.4mm dia fixed with tinned tacks of tinned tacks of wire staples size of mesh 12mm all as specified and as directed.

M & L for cutting chases in stone walls , pinning in , making good to facing where required and pointing in cement mortar (1:3) to ends of edges of landing steps, cills, sunshade, shelves, lintels, etc ; and cutting chease for water tubing or concealed conduit wiring , etc, and making good cutting not exc 10 cm girth all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

Refixing 15 mm bore of pipes old steel pipes and connection in new or old position (walls, ceiling, floors etc,) all as specified and as directed.

Refixing 20 mm bore of pipes old steel pipes and connection in new or old position (walls, ceiling, floors etc,) all as specified and as directed.

Taking up or down 25 or 32mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

S & F in repairs 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.

S & F in repairs 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.

S & F in repairs 25 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.

Dismantling water tank of capacity exc 500 litres and n.exc 1000 litres complete all as specified and as directed.

S & F in repairs rotational moulded polyethylene water storage tanks triple layered (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position all as specified and directed.

S & F in repairs rotational moulded polyethylene water storage tanks triple layered (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position all as specified and directed.

S & F in repairs 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min. wt 20mm-210gm) all as specified and as directed. Make : Prayag/ Polytuff

S & F in repairs PVC tank cover for 500 /1000 Ltrs capacity complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or accounted under schedule of credit (measured overall as fixed along the centre line overall as fixed along the centre line over fittings and accessories) all as specified and as directed. Note :- Rate for fixing the gutter upto 10mtr height deemed to be included in quoted rate by the contractor.

S & F 110 mm bore PVC (SWR) pipes, type 'B', with pressure rating 6 Kg/ Sqcm single socketed in any length with rubber ring joints laid in floors or trenches/ wall etc complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes, type 'B', with pressure rating 6 Kg/ Sqcm single socketed in any length with rubber ring joints laid in floors or trenches/ wall etc complete all as specified and as directed.

S & F in repairs 110 mm PVC (SWR) WC connector bent type all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends of any radius with access doors all as specified and as directed.

S & F 75 mm bore PVC (SWR) bends of any radius with access doors all as specified and as directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door all as specified and as directed.

S & F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement all as specified and as directed.

S & F PVC (SWR) Floor trap of 100 mm outlet plain with grating including jointing with solvent cement all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc.) or insulation board /slab/ blanket any thickness including cover fillets all as specified and directed.

S & F in repairs for gypsum board false ceiling 12mm thick fixed with standard GI frame work with GI fixing channels of 16 gauge, main "U" shaped channels @ 1220mm c/c and inter connected cross channels "C" shape spaced at 610mm c/c, the main fixing channels shall be fixed through GI cannels suspenders from thereof @1200c/c, Main and inter connected channels shall be fixed through fasteners clips as per manufacturer's instructions, with and including plaster of paris decorative type cornices all around at the junction of wall and ceiling etc shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and as directed.

S & F in repairs gypsum board false ceiling 12mm thick including all connecting accesserioes, and shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and as directed.

S & F in repairs for wall panelling gypsum board 12mm thick with including all connecting assesories and shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and as directed.

S & F in repairs for modular false ceiling systems in ArmGym-FB for Vinyl face, washable metallized polyester foil backing vinyl covered edges of 9mm thick of calciumsilicate material of size 595mm x 595mm GRG ceiling tiles shall have weight 7 Kg /Sqm and fixed with bottom face powder coated suspension system (Grid). The size of the same is 15mmx 32mm. The galvanized iron sheet of thick 0.30 mm used in the manufacturing of grid is zinc coated for preventing corrosion. The main runners are hung from the soffit with help of GI wire hanger complete with installation all as per manufacturer's instruction and as directed. Note :- Rate for fixing the ceilling upto 10mtr height deemed to be included in quoted rate by the contractor. Make: Armstrong/ Diamond/ Saint Gobain.

S & F for repair only modular false ceiling board 9mm thick of calciumsilicate material of size 595mm x 595mm GRG ceiling tiles shall have weight 7 Kg /Sqm all as specified and directed. Note :- Rate for fixing the ceilling upto 10mtr height deemed to be included in quoted rate by the contractor. Make: Armstrong/ Diamond/ Saint Gobain.

S & F in repairs on toughned glass, door/partition 10mm thick including making holes in glass and all accessories for fixed in position all as specified and directed.

S & F in repairs on toughned glass, door/partition 8mm thick including making holes in glass and all accessories for fixed in position all as specified and as directed.

S & F in repairs aluminium coated curtain rods brackets antique finish with doom suitable for single curtain rods of 25 mm fixed in position with appropriate screws all as specified and as directed.

S & F in repairs 25mm dia aluminium coated designer curtain rods antique finish fixed to double bracket matching with curtain rods in fixed in position all as specified and directed.

S & F for mild steel work in tubular post, trusses including special shaped washer etc.,complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade E-250 all as specified and as directed.

S & F for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders framed balusters; walk ways railings ; framework of water tanks and similar work confroming to Fe 410-0 or Fe 310-0 all as specified and directed.

M & L for preparation of new/previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed.

M & L for pre-painted Galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding to wall fixed with self tapping screws all as specified and directed.

Fixing only pre-painted Galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding to wall fixed with self tapping screws all as specified and directed.

M & L for pre-painted Galvalume aluminium Zinc coating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding to wall fixed with self tapping screws all as specified and directed.

Fixing only pre-painted Galvalume aluminium Zinc coating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in covering/cladding to wall fixed with self tapping screws all as specified and directed.

Dismantling polycarbonate sheet of any size any thickness from roof covering at any height complete all as specified and directed.

S & F 3mm thick, solid embossed pattern polycarbonate sheet, colour as approved by GE as in roof, fixing with self tapping screw and joints of polycarbonate sheet shall be sealed with silicon with and including aluminium strip/ties etc required for fixing all as per manufacturers instructions and directed.

M & L for complete removal of existing treatment from old plastered surfaces of celing and walls and applying two coats of Asian paints Royale Shyne paint (coloured/white) over a coat of deco prime primer over and including one coats of wall care putty with brush/roller, finished even and smooth complete all as per manufacturer's instruction and as directed.

S & F in repairs for 1213 x193 x 8mm thick / or any size laminate wooden flooring having abrasion class AC4/ class 32 with interlocking system and corner and edges profiles over 1mm thick plastic sheet and 2mm thick form complete laid all as per manufacutures instructions and as directed.

S & F in repairs for 9 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice lamination and other side balancing white laminations, fixed to aluminium/ timber frame work all as specified and directed.

S & F in repairs for 12 mm thick prelaminated particle board, interior graded, preliminated one side with decorative choice lamination and other side balancing white laminations, fixed to aluminium/ timber frame work all as specified and directed.

Fixing only prelaminated particle board of any size or thickness including all accessories fixed to aluminium/ timber frame work all as specified and directed.

S & F in repairs for 1.5 mm thick decorative laminates type I, or surface finish, colour and pattern and making good with accessories complete all as specified and as directed.

S & F in repairs for hardwood (solid wood) flooring of species white oak solid of size 1200 x 150mm x 18mm thick prefinished with aluminium oxide with UV cured coating , tongue and grove on all four side locking and maximum 1mm micro bevel "V" grove along all joints over 8mm thick plywood BWR type BB5 ply fixed with pneumatic nails over 2mm thick polyurethane foam all as specified and directed. Make of Hardwood for solid wood flooring : Florz /Novar /Ego /Trysquare or equivalent as approved by GE

Repairs to indoor Badminton Flooring by removing and relaying of the existing 7 mm thick PVC sports flooring with adhessive and joining with weld cod (rubber rod) through mechanical heating all as per manufacturers instruction etc all as specified and directed by Engr-in-charge. (Note : This item shall be executed by certified OEM only. Approval shall be taken from GE before execution) Make : DECO / EBACO

S & F in repairs of new topflex sports flooring 7 mm or 6.50 mmwith adhesive and joining with weld cod (rubber rod) through mechanical heating all as per manufacturers instruction etc all as specified and directed by Engr-in-charge. (Note : This item shall be executed by certified OEM only. Approval shall be taken from GE before execution) Make : DECO / EBACO

S & F in repairs powder coated aluminium door/ windows/ partition etc. with one or more rebates using suitable size standard aluminium sections including jointing cleat, glazing clips, rubber neopreone packing including necessary accessories like handles, hinges etc complete all as specified and directed .

GMS Builders

HRML CONSTRUCTIONS

SHANTA DURGA TRADERS

GOWRIPRIYA ENTERPRISES