REPAIRS TO JOINERY INCLUDING DOORS WINDOWS VENTILATORS ETC IN RESIDENTIAL AREA CVRDE AVADI

Amount

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m with shutters (without taking off shutters from the frame) each all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames (WOOD / PVC) n.exc 1.5 sq. m with shutters (without taking off shutters from the frame) each all as specified and directed by Engineer-in-Charge.

Taking down shutters exc 1 sq. m and n exc 2 sq. m all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description of area exc 1 Sqm but n.exc 2 Sqm each and refixing shutters in same opening or other opening including necessary minor repairs or resecuring or easing as required at site all as specified and directed by Engineer-in-Charge. Note: The quoted rate includes necessary materials required for repairing.

S&F Second class Hard Wood Plain solid straight chowkhat and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed by Engineer-in-Charge.

S & F Second class hard wood Plain framed, panelled shutter (two panel) 35mm thick with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with conmlercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressme treated fitted to chowkats all as specified and directed by Engineer-in-Charge.

S&F Second class hard wood Glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed by Engineer-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed by Engineer-in-Charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed by Engineer-in-Charge.

Dismantling of Aluminium and mild steel works of any description not otherwise provided all as specified and directed by Engineer-in-Charge.

S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, devetailed or welded all as specified and directed by Engineer-in-Charge.

S&F Aluminium powder coated frame made out of hallow extruded aluminium section (minimum thickness of powder coating 50 micron) for windows/ventilators with one or more rebates including joining cleats, beads for fixing etc complete all as specified and as directed & approved by Engineer-in-Charge.

S&F Figured glass, pin headed type 4mm thick fixed with glazing clips, rrubber beadings / gasket in square not exc 0.5 sqm in each pane all as specified and directed by Engineer-in-Charge.

S&F Alumnium powder coated louvers (movable arrangement in pair) for ventilators including locking arrangement complete all as specified and directed by Engineer-in-Charge.

S&F Figured glass, pin headed type 4mm thick fixed to aluminium lovers in strips width not exceeding 80mm all as specified and directed by Engineer-in-Charge.

S&F aluminium anoised sliding door bolt 300mm long with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding boths of external section or cast alumnium aloy and fixed all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodized barrel tower bolts 200mm long of extruded section and fixed all as specified and directed by Engineer-in-Charge.

S&F Aluminium handle cast type anodized of size 150mm long all as specified and directed by Engineer-in-Charge.

S&F Butt hinges,100 mm, medium weight, cold rolled mild steel, and fixed all as specified and directed by Engineer-in-Charge.

S&F Stainless Steel hinges,100 mm, and fixed all as specified and directed by Engineer-in-Charge.

S&F Aluminium Alloy anodised hinges 100 mm, and fixed all as specified and directed by Engineer-in-Charge.

S&F 25 x 3 mm flat iron for hold fast confirming to Fe-290 Gde E-165 all as specified and directed by Engineer-in-Charge.

Cutting holes for fixing hold fast into or through brick wall built in cement mortar, superficial area n.exc 150 sq.cm ,15cm depth and making good in cement concrete 1:2:4, TypeB-1 as required all as specified and directed by Engineer-in-Charge.

S&F in repairs 300mm long aluminium anoised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet cast or extruded section and fixing both and sliding boths of external section or cast alumnium aloy and fixed all as specified and directed by Engineer-in-Charge.

S&F in repairs 200mm Aluminium anodized barrel tower bolts of extruded section and fixed all as specified and directed by Engineer-in-Charge.

S&F in repairs Aluminium handle cast type anodized of size 150mm long all as specified and directed by Engineer-in-Charge.

M&L for preparing new wooden surfaces and applying two coats of synthetic enamel paints over a coat of pink primer all as specified and directed by Engineer-in-Charge.

Taking down cement plastering of any description scrubbing down with water washing down etc. all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick CM 1:6 on fair face of brick walls or concrete surface finished fair and even all as specified and directed by Engineer-in-Charge.

M&L for prepration of new plastered surface and applying three coats of white wash on walls all as specified and directed by Engineer-in-Charge.

Hacking out old broken glasses any thickness size , quality, description from metal frame including punching or drilling out old glazing pins /spring clips etc all as specified and directed by Engineer-in-Charge.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty and cilips in squares n. exc 0.5 sqm each pane all as specified and directed by Engineer-in-Charge.

M&L for Securing glass of any description in existing metal frames glazed with putty including removing loose or decayed putty, painting/oiling one coat on rebates, grooves, reputtying incl pins and painting/oiling puttied surface to match existing work all as specified and directed by Engineer-in-Charge. (New length of frame reputted shall be measured)

S&F box hinges for Mild steel windows by means of welding including replacement of damaged hinges / member and making good the surface by painting with one coat of primer and two coats of synthetic enamel paint all as directed by Engr-in-charge. (Note:This work shall be carried out from outside of building. The quoted rates includes for necessary scaffolding as required at site.)

M&L for preparing of steel surface and applying two coats of synthetic enamel paints over a coat of red oxide primer all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in repairs with stainless steel wire staples all as specified and directed by Engineer-in-Charge.

S&F mild steel framed work such as grills, ladder, framed baluster walkways, railing etc and conforming to Fe 290Gde -E-165 including necessary cutting, weldingetc to match with existing complete all as specified and directed by Engineer-in-Charge.

S&F Harrison rail anodised aluminium alloy 20 mm dia with decorative brackets, support, stops, clamp etc as required at site complete including taking down existing rail of any type all as specified and directed by Engineer-in-Charge.

S&F Prelaminated particle board 19mm thick exterior grade one side with decorative choice lamination and other side balancing with white lamination fixed in cupboards or narrow width, fixed with 3mm thick teakwood lipping, fixed with screws/nail to timber work complete fixed in repair all as specified and directed by Engineer-in-Charge.

S&F Plywood 4 mm thick, grade BWR, type BB, fixed with screws to timber frame work all as specified and directed by Engineer-in-Charge.

S&F in repair Door stopper, 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring and having high quality rubber pad complete all as specified and directed by Engineer-in-Charge.

S&F in repair mild steel ordinary rat tail rod 300mm long, pattern spring including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

S&F mild steel ordinary rat tail rod 300mm long, pattern spring including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

S&F in repairs rubber beading 40mm wide for fixing in bottom of wooden / aluminium door shutter fixed with self drive screw complete to cover bottom gap of door all as specified and directed by Engineer-in-Charge.

S&F Plywood 12 mm thick, grade BWR, type BB, fixed with screws to timber frame work all as specified and directed by Engineer-in-Charge.

D Subramani and Sons

Lakshmi Constructions