A/R and M/O Building in BM-I Division during2025-26.

Rewinding of 30 HP motor of approved make including testing, removing, re-assembling, making in good condition, carriage etc. with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency).

Rewinding of 20 HP Sump motor of approved make including testing , making in good condition etc. I/c removing and fixing of pump seal with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency).

Rewinding and repairing of 5 HP mono block pump including replacement of pump gasket, ball bearing, roter sleeve, bearing bush and impeller repairing, rebalancing, etc. I/c removing and fixing of pump seal with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency).

Rewinding and repairing of 7.5 HP borewell submersible pump including replacement of pump gasket, ball bearing, roter sleeve, bearing bush and impeller repairing, rebalancing, etc. I/c removing and fixing of pump seal with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency).

Rewinding/overhauling/repairing of 2 HP mono block submersible pump including replacement of pump glass set, ball bearing greasing , etc I/c removing and fixing of pump seal including lifting and carriage as approvd by Engineer-in-charge.(Credit of Dismentled material goes to agency).

Repairing of 30 HP motor pump set parts like Impeller shaft, shaft sleve, Packing, Vane, Casing, Casing wear ring etc and replacement of defective parts with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency).

Repairing of 20 HP motor pump set parts like Impeller shaft, shaft sleve, Packing, Vane, Casing, Casing wear ring etc and replacement of defective parts with entire satisfaction of Engineer-in-charge.(Credit of Dismentled material goes to agency).

Providing and fixing of ball bearing suitable for mody/KSB make sewage drainage submersible electric pump etc. as required and as per the direction and satisfaction of Engineer-in-charge .Upper Bearing 30/20HP

Providing and fixing of ball bearing suitable for mody/KSB make sewage drainage submersible electric pump etc. as required and as per the direction and satisfaction of Engineer-in-charge. Lower Bearing 30/20 HP

Providing and fixing MCCB 100 , 3 POLE MCCB with thermal release range of 80-100A having breaking capacity of 30 KA lcu at 415VAC 50 Hz lauritz knudsen or equivalent make as per directions and satisfaction of Engineer-in-charge.

Providing and fixing MCCB 250 , 3 POLE MCCB with thermal release range of 160-200A having breaking capacity of 25 KA lcu at 415VAC 50 Hz lauritz knudsen or equivalent make as per directions and satisfaction of Engineer-in-charge.

Installation/lowering of Mono Block pump set upto 30 HP capacity with the help of chain pully and tripod in Pump room connection of delivery pipe line. Electric cable, testing etc. as required as per the direction of Engineer-in-charge.

Lifting and taking out of Mono Block pump set upto 30HP capacity with the help of chain pully and tripod in Pump room connection of delivery pipe line. Electric cable, testing etc as required as per the direction of Engineer-in-charge.

Installation/lowering of clear water submersible pump set upto 20 HP capacity with the help of chain pully and tripod in sump/tubewell connection of delivery pipe line. Electric cable, testing etc. as required as per the direction of Engineer-in-charge.

Lifting and taking out of clear water submersible pump set upto 20 HP capacity with the help of chain pully and tripod in sump/tubewell connection of delivery pipe line. Electric cable, testing etc as required as per the direction of Engineer-in-charge.

Lowering and re-installation upto 7.5HP submersible pump set and rubber gasket of nut bolts which is chargeable in the borewell and re-fixing of delivery line with the help of tripod stand and chainpully block with waterproof cable joint including cartage of submersible pump from site to work shop for making connection as required as per the direction and satisfaction of Engineer in charge.

Lifting of borewell submersible pump set upto 7.5HP from the bore well along with GI delivery pipe 90 metre depth and submersible cable with the help of tripod stand and chain pully including cartage of submersible pump from site. as required as per the direction and satisfaction of Engineer in charge

Providing and Fixing of 30HP Mono block pump set with Three phase including all Accessories/Fitting and cartage having flow rate of 10-28 lps, head range 48-68m speed of 3000 rpm of kirloskar or equivalent make as per directions and satisfaction of Engineer-in-charge.

Providing and Fixing of 20HP horizontal openwell submersible pump set with Three phase including all Accessories/Fitting and cartage having flow rate of 12-48.5 lps, head range 10-30m speed of 3000 rpm of kirloskar or equivalent make as per directions and satisfaction of Engineer-in-charge.

Providing and Fixing of 5 HP Mono block pump set with Three phase including all Accessories/Fitting and cartage having flow rate of 12-33 lps, head range 6-16m speed of 3000 rpm .

Providing and Fixing of 02 HP Centrifugal Monoset Pump set( single phase ) including all Accessories/Fitting and cartage having head range of 6-12m of crompton or equivalent make as per directions and satisfaction of Engineer-in-charge

Providing and fixing single phase preventer 415 V AC 50 Hz upto 30 HP mono block pump set starter mini lock/lauritz knudsen make including labour charges cartage testing etc. as per the direction of Engineer-in-Charge.

Providing and fixing volt-ampere meter 500volt (0-100 amp) of make AE (Automatic electric) lauritz knudsene,Siemens, Havells or equivalent lauritz knudsene as per direction of Engineer-in-Charge.

Providing and fixing gun metal sleeve graphite collars of required size in pump set 5 HP to 30 HP mono block pump set as per direction of Engineer-in-Charge.

Providing and fixing 32 ampere double pole MCB of 250V DC DP of make lauritz knudsen/Havells/Fuji or equivalent make as per direction of Engineer-in-Charge.

Providing and fixing 63 ampere double pole MCB of 250V DC DP of make lauritz knudsen/Havells/Fuji or equivalent make as per direction of Engineer-in-Charge.

Providing and fixing spare part for direct on line fully automatic starts lauritz knudsen /BCH or equivalent make. 25 AMP 3 POLE Contactor

Providing and fixing spare part for direct on line fully automatic starts lauritz knudsen/ BCH or equivalent make. 40 AMP 3 POLE Contactor

Providing and fixing spare part for direct on line fully automatic starts lauritz knudsen/ BCH or equivalent mak . 9-14 AMP Overload Relay

Providing and fixing spare part for direct on line fully automatic starts lauritz knudsen/ BCH or equivalent mak . 20-33 AMP Overload Relay

Providing and fixing spare part for direct on line fully automatic starts lauritz knudsen/BCH or equivalent mak . 24-40 AMP Overload Relay

Visiting charges of electrician for making required installation of pump or other trouble checking in pump and starter etc.

Dismantling and installing of pump set at site after repairing the same including cartage of motor pump to the workshop and back to site 5 HP.

Providing and fixing MCCB 400 , 4 POLE MCCB with thermal release range of 320-400A having breaking capacity of 50 KA lcu at 250V DC 50 Hz lauritz knudsen or equivalent make as per directions and satisfaction of Engineer-in-charge.