Computer Bill Sec. Elect

Amount

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

9.1.2Q Providing wood work in frames of doors , windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) - Vegesa / Bandaru wood.

9.5.1.1Q Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately , all complete - Vegesa / Bandaru wood - 35 mm thick shutters.

9.7.1Q Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or paneled and glazed shutters 25 mm to 40 mm thick - Vegesa / Bandaru wood.

9.48.2 Code No: 9.48.2: Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S.flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc.

9.53 Code No: 9.53: Providing 40 X 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30 x10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

9.96.1 Providing and fixing aluminium sliding door bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 300 X 16 mm.

9.70.1 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.complete - 125 x64 x1.90 mm.

9.70.3 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.complete - 75 x 47 x 1.80 mm

9.97.3 Providing and fixing aluminium tower bolts ISI marked , anodised (anodic coating not less than grade AC 10 as per IS :1868) , transparent or dyed to required colour or shade , with necessary screws etc. complete - 200 x10 mm

10.2 Structural steel work riveted , bolted or welded in built up sections , trusses and framed work , including cutting, hoisting , fixing in position and applying a priming coat of approved steel primer all complete

11.41.2 Providing and laying vitrified floor tiles of size 600 x600 mm (thickeness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make , in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc.,complete - size of tile 600x600mm

12.72 Providing and fixing false ceiling works using superior fire rated gypsum board of 12.5mm thick mounted on GI frame work with ceiling section of size 80 x 26 x 0.55x3660mm spacing at 600 mm c/c suspended from ceiling using hanger rods at 1200 mm c/c with screw to level and line and applying one coat of primer , two coats of putty followed by and reflective paint in front of the stage area to the required shape and size , incluidng scaffolding etc.complete upto 6.5m height

12.80 Providing and fixing colour coated galvalume sheet of 550 M.P.A. yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31 mm pitch of 250 mm and overall width of 1060 mm and thickness 0.5mm with required J or C hook bolts and nuts 8mm dia G.S.paint and working etc., complete excluding the cost of purlin , rafter and truss etc.,

13.1.2 12mm cement plaster of mix -1:6 (1 cement : 6 fine sand).

13.2.2 15mm cement plaster on the rough side of single or half brick wall of mix-1:6 (1cement : 6 fine sand).

13.26A Providing and applying ready mixed wall putty (JK / Birla) of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture's specification - Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm

13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15).

21.2.2 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 grade I type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings- Pre - laminated particle board with decorative lamination on both sides.

21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of 5.50 mm thickness

21.13 Providing and fixing 100 mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Basic Code No. 3296 Supplying and fixing of 4 KVA stabilizer to suit for A/C unit complete ad directed by the Engineer-in-charge.

NON-PSR Supplying and fixing of 4 star or above rated wall mountable split type 2.0 Ton capcity AC unit as per IS 1391(part 2) with following specifications, Material for body for indoor unit ABS normal cooling capacity ( K Cal/Hr) 6000, power consumption max (watts) 2700, Main room discharge Air flow (cum/Hr) 800, Air conditioner shall be suitable for 230 V, 50 HZ operation and capable of performing the function as cooling air circulating and filtering and confirm to IS 10617 part (I)-1983 (Amendment1+2 make: Daikan/ carrier/O General.