Providing, installation and commissioning of submersible pumping machinery along with allied Electro-Mechanical works for Augumentation in connection to Accommodate FHTC at P.H. No.-II ,ZONE-I (Replacement TUBE WELL) under Gadpukuria ground water b

Amount

PART-A Supply delivery at site of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification : DISCHARGE : 45 cubic mtr./Hr. HEAD : 40 Mtr. *N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery. (B) Test Certificate of pump & motor should be submitted during delivery.

Supply delivery at site of 2.5 Sq. mm. 3 core, water proof flat copper cable as per specification of NIT N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 1.1 Kv Grade 35 sq. mm. 3½ core XLPE insulated Al .Ar. Armoured cable as per specification of NIT . N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 1.1 Kv Grade 25 sq. mm. 3½ core XLPE insulated Al .Ar. Armoured cable as per specification of NIT . N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 1.1 Kv Grade 12 core, 2.5 Sq. mm. Armoured copper control cable as per specification of NIT. N.B:- Cable should be supplied as per site requirement.

Supply delivery at site of 100 Amp Kit-kat rewirable porcelain fuse unit (both base and bridge)as per specification of NIT

Supply delivery at site of 100 Amp. TPN, 415V, main switch with rewireable type fuse link in sheet steel enclosure.as per specification of NIT

Supply delivery at site of 100 Amps.4 way wall mounted Bus-Bar chamber having 4 Nos. Copper Bus-Bar.as per specification of NIT

Supply delivery fitting fixing of 100 Amp. 4 pole on load change over switch.

Supply & delivery at site 2 mm thick CRCAsheet steel enclosed type Indoor wall Mounted 415 V MCC cum PDB Panel having required Feeders wih PLC as per specification of NIT (7.5HP to 12.5HP).

Supply and delivery at site of 80 mm dia 3 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per specification of NIT

Supply and delivery at site of 80 mm dia 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG and as per specification of NIT

Supply and delivery at site of 80mm dia CI top & bottom adopter and as per specification of NIT

Supply and delivery at site of Heavy type suitable dia MS suspension clamp along with nuts bolts and washer and as per specification of NIT

Supply and delivery at site of Three Phase actuator operated wafer type butterfly valve PN-1.0 rating of norminal dia 80 mm. and as per specification of NIT

Supply and delivery at site of 80mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90⁰ bend-2 nos. CIDF tee- 1 no., CIDF short piece -2nos ,flange etc. and as per specification of NIT

Supply and delivery at site of Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry and as per specification of NIT

Supply and delivery at site of Pressure gauge [Make- H. Guru/Febig] 102 mm. dia [0-7 kg/Sq.cm] brass cock and fitting complete [ This cost includes 15 mm. dia G.I. pipes and specials]

Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.

Supply delivery at site of Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump [This cost includes 15 mm. dia G.I. pipes and specials

Supply & delivery at sites Armless PVC chair.

Supply & delivery at sites PVC table.

Supply & delivery at site of 25 KVA capacity Power correction arrangement voltage range -250V -500V as per Specification of NIT.

Supply delivery at site and storage of Diaphragm type Disinfection arrangement with Flow rate 100 LPH Pressure -10Kg/cm² as per specification of NIT.

PART-B Installation of all items as mentioned in Sl.No.1 to 24(Part-A) including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials, earthing arrangement of motors, starters, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost of welding etc. as required for complete installation as per Hydraulic standard & IE rules in compliance with specification of NIT and upto entire satisfaction of EIC.

Earthing with 50 mm dia. G.I. pipe, 3.65 mm thick & 3mtrs long (2 sets) and conn. by 25x 6 mm G.I. strip ( for reqd length) upto the earth bus-clamp with the equipments on wall/floor with staplesburied inside as reqd. at site and with 25 mm x 6mm GI flat strip to earth electrode pipe,fastening with 13mmx80mm G.I bolts,nuts,washers, including all f & f of materials & filling & restoring the surface by ramming &making suitable earthpit with brick structure & MS lid on top as per direction.

Making internal/external electrification of P/House by 2 x 1.5 sq.mm. P.V.C. cu wire through suitable size casing/capping for 4 nos. point ( 1 no. bracketpoint , 1 no. tube light point , 1 nos. bulk head point and 1 fan point ) and 1 no. 5A ,5 pin plug point with earthing attachment of 1 x 1.5 sqmm cu. Wire with supplying of tube light fittings , bulbs & 1200mm sweep celling fan(Make-As per approved vendor list.) as per approved make including suppying and fixing 10 A. DP MCB (As per approved vendor list.) make on wall all complete as per I.E. rules and direction. (including making external illumination by Supply & fixing of 1 no. 40W LED IP 66 type outdoor luminairie incl. Supply & installation of MS bracket & connection complete) (Make : As per Approved Vendor List.)

Painting of the installation (viz. pumps,valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per NIT specifiaction & direction of EIC.

Testing & Commissioning of the entire installation i.e. Pumps, Motors,valves etc. as in PART A of (Sl no. 1 to 24) as per direction and to the entire satisfaction of E.I.C.

Operation & guarding of the pumping machinery with full satisfaction of EIC.

Add: GST @ 18%

Add: LW Cess @ 1%

ANJAN ENTERPRISE (BID ID -5567750)

BIDYUT KUMAR MUKHERJEE (BID ID -5567769)