GE(S)/M-17/2023-24

Amount

Dismantling fencing wire mesh of any type complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed portion, post embedded in natural ground complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in any type of soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

S&F for mild steel fencing posts/struts including embeding in concrete and screwing etc. including securing bolts; including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for mild steel screw bolts 5mm to 10mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only 4mm dia chain link MS galvanisd medium coated as per IS 4826 fencing 75mmx75mm mesh size, complete all as specified and directed. Note: Weight to be determined by BOO.

Supply only 8/10mm dia mild steel round bar of any shape and length as in line wire to chain link fencing complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type and standards, rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

M&L for preparation of newly untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of black bitumeneous paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of newly untreated steel surfaces of any description not otherwise described n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of newly untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Fixing only galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Providing and laying at or near ground level rubber moulded factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including necessary earth work and making drainage opening wherever required complete all as specified and directed.

M&L for 60mm thick, M-35 Grade coloured machine pressed precast rubber moulded concrete interlocking (red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 , laid dry over and including 50 mm thick screened river washed sand cushion complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded aggregate) as in sub base of flooring to receive paver complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching etc slightly rounded or chamferred angles and throating including formwork if any, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) including removal of debris from the site not exceeding 50 meter complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

M&L brick work with flyash bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.

All as per srl item No 21.00 above but (EXCEPT BRICKS) complete all as specified and directed.

M&L for rendering 12 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Taking down existing cement plaster at any height on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for preparation of olddecorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds and efflorescent salts and trading oil and greasy spots incl. cornices washing down etc and applying one coat of Exterior Weather Coat paint , white or tinted including taking down existing grasses, vegitation, small trees and making good the disturbed surface with CM1:3 cement mortar complete all as specified and directed.

M&L for preparation of new plastered surface of external walls surface and applying two coats of exterior weather coat over a coat of primer complete all as specified and directed.

Abrol construction co

M/S TARSEM CHAND AND SONS

M/S NARESH KUMAR SHARMA

M/S BHOTO AND CO

M/S HIMANSHU BUILDERS

VOHRA CONSTRUCTION CO

AV ENTERPRISES

Bidder Name

surjit enterprises

Abrol construction co

M/S TARSEM CHAND AND SONS

AV ENTERPRISES

M/S BHOTO AND CO

M/S NARESH KUMAR SHARMA

M/S HIMANSHU BUILDERS

VOHRA CONSTRUCTION CO