REPAIR / MAINTENANCE TO FALSE CEILING, FLOORING, KOTA STONE FLOORING, GRANITE PLATFORM AND MISC B/R REPAIRS IN 199 MED REGT, 61 CAV, 61 SA PROVOST UNIT AND OTHER UNITS UNDER AGE B/R-I OF GE JAIPUR

Amount

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed by Engineer in Charge.

Taking down of shutters of any description exc 2 sqm each complete all as specified and as directed by Engineer in Charge.

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame complete all as directed.

Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4 Sqm each without taking off shutters from the frame complete all as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing. Make - Rajshri, Sintex

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and as directed by Engineer in Charge. The size of members of shutters shall be as specified in MES SSR Part-I.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer in Charge. The size of members of shutters shall be as specified in MES SSR Part-I.

S&F 300mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as specified and as directed by Engineer in Charge. .

S & F 150mm long aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

ditto as item No 12 but 100 mm long

S & F 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.

S & F 150mm long aluminium anodised barrel tower bolts of extruded sectionand fixed complete all as specified and as directed by Engineer in Charge.

S & F 100 mm butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engineer in Charge.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar

M&L for granite (of any type), 16mm to 18mm work (table rubbed and polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for Dholpur stone 16 to 18 mm cladding gang saw cut with macnine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one mumber SS clamps (grade-202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fasterner, polishing,rubbing & including silicon treatment.

M&L for Dholpur stone old surface cladding polishing, rubbing & including silicon treatment etc complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick,size of kota stone 450x450 mm over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level)

M & L plain Cement Concrete 1:4:8 type D-2 (40mm graded aggregate) in sub base of floors

M & L Machine ruibber mouldede colour pigment pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement laid over and including 25mm thick sand cushion layer complete

M & L precast PCC blocks or slabs 150 mm thick (1:2:4) mix type B-1 using 20 mm graded aggregated with plain or interlocking joints as directed complete in walls setting in CM (1:6).

M & L 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as plinth protection finishing even and smooth without using extra cement complete all as specified and as directed

M & L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded agg)

S & F in repairs aluminium door stopper 150 mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete all as specified and as directed by Engineer in Charge.

S & F galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer in Charge.

S & F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer in Charge.

S & F in repair 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane.

S&F MS famed work such as guard bar/grill, gratings etc with ends of bars shouldered/ritveted or forced into spikes conforming to FE-310-0 or Fe-410-0 complete all as specified and as directed by Engineer in Charge.

Dismantling wrought iron or mild steel work of any description nototherwise provided for

S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming toIS 1161-1979 graded St-240

M&L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering

M&L Two coats of synthetic enamel paint to new steel surfaces over red oxide primer exc 10 CM in width or girth including preparation of new steel surfaces complete all as specified and as directed by Engineer in Charge. .

Supply and fixing anodised aluminium frame for door , windows, ventilators with one or more rebates incl jointing cleat for fixing etc complete all as specified and as directed.

Supply and fixing anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed by Engineer in Charge.

Supply and fixing anodised aluminium window and ventilator shutters, side hung typewithout sash, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium fittings such as peg stays 150mm long 1 No, hinges type B-21, 100mm long (2 No) suitable handle 1 No complete all as specified and as directed by Engineer in Charge.

S&F aluminium grill of size 50mm x 50mm size of mesh and 6mm dia fixed complete to existing frame complete all as specified and as directed by Engineer in Charge.

M&L for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screw complete all as specified and as directed by Engineer in Charge. .

S&F sheet glass 4.00 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane.

F&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer in Charge.

S&F in repair Door closer aluminium anodized extrudedsection body hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg as in repairs complete all as specified and as directed by Engineer in Charge. .

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified & as directed.

M&L for Walling of random rubble, uncoursed well bonded ,bedded and solidly hearted, built in CM 1:6 complete all as specified & as directed.

M&L brick work with old size with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & as directed.

Taking down cement plaster or cement lime plaster/ tiles of any descrption on PCC/ stone surface/ brick surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer in Charge.

M & L rendering 15mm thick on Brick masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cementcomplete all as specified & as directed.

M & L Rendering 15 mm thick on stone masonry wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement.

M & L Rendering 10 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement

M & L preparing new plastered surfaces and applying three coats of white wash on ceiling all as specified and as directed

M & L preparing new plastered surfaces and applying two coats of cement base paint on wall over a coat of alkali based primer all as specified and as directed

M&L preparation of newly plastered surface wall and applying two coats of distemper oil emulsion of any tint over a coat of primer complete all as specified and directed.

M & L Preparing new plastered or unplastered surfaces and applying two coats of cement base paint on walls complete all as specified & as directed.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying one coat of distemper of approved tint all as directed.

M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying one coat of white wash on ceiling surfaces complete all as specified & as directed.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying two coats of distemper of approved tint all as directed

M&L preparing old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&Lcomplete removal and preparation of old concrete/ brick/ stone Surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed by eng in charge

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises

M & L glazed coloured ceramic tiles 300x450x7 mm thick, on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 complete.

M&L Vitrified Ceramic tiles 9-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.38 sqm, in floors etc, set over 15mm thick screed in CM 1:6 jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade.

M&L Vitrified Ceramic tiles 9-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.38 sqm,on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match colour of the tile.

M & L coloured non skid ceramic joint free tiles 400x400x 7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M & L coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exc 0.06 Sqm but n exc 0.11 Sqm, in vertical surface as in skirting over & including 10 mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved and directed

M&L for taking out shutters of Aluminium door any desc from frame and refixing in position after repair including change of rubber neoprene packing, changing hinnges, beadings and other connected items all as per engineer incharges instruction.

S & F 18 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side decorative as in Sink/ Wash Basin cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of REHAU or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified and directed.

S & F 8 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side un decorative as in back of kitchen cabinets complete all as specified and directed..

S & F auto close hinges , stainless steel of grade SS-304 , bright finish fixed complete all as specified and directed. (Make : Hettich or equivalent).

S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specificallly provided complete all as specified and as directed.

M&L for providing cement concrete (1:5:10), type E-2, using 40mm graded stone aggregate as in sunken portion of WC/toilet/bath complete all as specified and as directed.

S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor including taking up or down complete all as specified & as directed.

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor including taking up or down complete all as specified & as directed.

S&F GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor including taking up or down complete all as specified & as directed.

S&F in repair 15 mm bore bib tap fancy type chromium plated cast copper alloy with cruth or butter fly handle screwed down for iron pipe and fixed complete all as specified & as directed.

S&F in repairs PVC valveless,syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including brakects flushing, brakects flushing pipe complete all as specified & as directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified & as directed.

S&F in repairs Vitreous China wash basin, white , flat back, size 550mmx 400mm but including brackets , coupling and waste pipe complete all as specified & as directed.

S&F in repair Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15 mm complete all as specified & as directed.

S&F in repair stainless steel grating doom 100 mm dia complete all as specified & as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. complete all as specified and directed.

S&F in repair vitreous china Squatting pan 'Orissa' pattern water closet white size 580mm x 440 mm with integral foot rest (excludinfg flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphone pipe etc complete all as specified & as directed.

S&F in repair vitreous China urinals, bowl type(back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified & as directed.

S&F in repairs, PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for Anglo Indian WC/ English WC as in repairs complete all as specified and as directed.

S&F in repair angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore complete all as specified & as directed.

S/F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union ,125mm size complete all as specified & as directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) complete all as specified & as directed.

Dismantling old unserviceable RCC / PVC water tank capacity exc 500 and not exc 1000 ltrs & removal from site complete all as specified & as directed.

S&F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I, Make - Sintex, Polycon or eqivalent

S&F Rotatinal moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity 1000 ltr, Make - Sintex, Polycon or eqivalent

Disconnecting existing PVC water storage tank of capacity exc 500 ltrs & not exc1000 Ltrs, setting aside (or lowering if required) for repairs. cleaning, etc and hoisting if required reconnecting and refixing in position complete all as specified and directed.

Dismantling and removing from site wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and metalic frame

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.

S& F AnodisedGalvanised iron snap grid frame work for false ceiling all as specified size of frame 605mm x 605mm complete all as specified and as directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S & F PVC Wall Lining (Panelling) consisting of min 5-7mm thick coloured or textured PVC sheet fixed to PVC fillet frame with screws inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing(PVC fillet shall be paid seprately) (including refixing of all fittings on the surface after the work) including taking down wall paneling complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Less Schedule of Credit

M/S ROHIT CONSTRUCTION (BID ID -3139548)

S.R.Enterprises (BID ID -3140336)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3146586)

M/s KAKSI ENTERPRISES (BID ID -3147245)