Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹37.2 LAccepted-AOC | 1 | Accepted-AOC Due to l-1 and credit | |
| 2 | 2₹40.4 L+₹1.9 L (5.02%)Rejected-Finance VILLAGE DEVRATHA NO 1 POST SHAHGANJ DIST AGRA U P | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹49.8 L+₹11.3 L (29.4%)Rejected-Finance FLAT NO 404 BLOCK II NIRMAL HEIGHT SECTOR 12A OLD MATHURA ROAD AGRA 282007 UP | AGRA | AGRA | UTTAR PRADESH | 282007 | 3 | Rejected-Finance Being other than L-1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
11 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Adm Area Agra 282008
GE (AF) Adm Area Agra 282008
REPAIR REPLACEMENT OF JOINERY AND ALLIED WORKS OF MD,OTM ACCNS UNDER AGE BR-II OF GE(AF) ADM AREA AT AF STN AGRA.
2023_MES_632056_1
8000-2112/E8
Open Tender
Civil Works
Item Rate
180 days
AF Station Agra
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE AF Adm Area Agra
₹80,000
Yes
24 Feb 2024
11 Dec 2023
18 Jan 2024
11 Dec 2023
11 Jan 2024
25 Dec 2023
Amount
Taking down chowkhat with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sqm but not exc. 4 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1.00 sqm mtr and not exc. 2.00 sqm in each complete all as specified and directed
S&F solid PVC door frame of size 50x47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings (SSR or TD) complete all as specified and directed.
S&F solid PVC door frame of size 50x95 mm made out of 5mm prelam PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings (SSR or TD) complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening including MS hold fast, tie bars and similar article conforming to Fe-290 Gde-E-165-0 with one shop coat of red oxide primer complete all as specified and directed.
S&F pressed steel frames for doors 165 x 60 mm size with and thickness 1.25 mm one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified incl filling plain cement concrete complete before fix complete all as specified and as directed
S&F pressed steel frames for doors 125 x 60 mm size and thickness 1.25 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified incl filling plain cement concrete complete before fix complete all as specified and as directed
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded colour plain PVC or channel having a PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete (SSR or TD) all as specified and directed.
All as per item no-10 above but both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges all as pecified and directed.
S&F 35 mm thick flush shutters in any leafs factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats as per drawing (SSR or TD) with primer complete all as specified and directed.
Refixing of shutters of any description exc 1 Sqm but n.exc. 2 sqm each including taking down & minor repair complete all as specified and directed.
S&F 35 mm thk 2nd class Hard wood Kiln seasoned and chemically pressure treated glazed & skeleton shutters in any leafs, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats with one shop coat of pink primer complete all as specified and directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
All as per item No-15 above but 18 mm thick WPC (Wood Polymer Composite) solid decorative type as in cupboard shutter & shelves etc
S&F in repair for 18/19mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws or rubber beads to timber or metal frame work complete all as spd and directed.
S&F steel window / ventilator made with pressed steel frame of 1.25mm thick MS sheet having two rebete and side hung glazed shutters (with glazing bars) and side hung fly proofing shutters (without glazing bars) including hinges with steel handles and steel peg stay dovelailed or welded including guard bars/grills of 10mm dia@125mm c/c spacing etc with one shop coat of red oxide primer complete all as specified & shown in drg CE/ALD/TD-172 sh 1/2 & 2/2. Note: Wire cloth and glass panes shall be measured and paid separately under respective items.
Material and labour for powder coated (min 50 micron, any colour) aluminiuym (sliding type) windows with three track bottom size 92x29.5x1.5mm thick, side and top frame size 92x29.5x1.5 mm and shutters powder coated aluminium 39x20x1.5 mm thick (02 nos glazed and 01 no gauged ) including necessary aluminium fittings like joint cleat glazing and gauging clips/strips, roller, locks and rubber packing, anodized snap beading screws etc with 5 mm thick tinted glass/ SS wire mesh with including all fittingss & fixtures complete all as directed. Note : All fitting/fixtures required for proper functioning of windows including glass panes & wire mesh complete are included in this item and nothing shall be paid extra. MS grill shall be measured and paid separately.
S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots,locks & other aluminium hardware and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note : Only glass panes & wire mesh shall be measured and paid separately, remaining fitting fixtures required for proper functioning of door/windowa/ventilators are included in this item.
S&F 5 mm thick (tinted) glass pane complete all as specified and directed.
S&F for 3 mm thick ordinary Sheet glass and glazing with oil putty or rubber beads, aluminium strip/fillet, nut bolts or with rivets/pins in square n.exc 0.5 sqm. in each pane completed all as specified.
S&F in repair for 3 mm thick ordinary Sheet glass and glazing with oil putty or rubber beads, aluminium strip/fillet/chanel, nut bolts or with rivets/pins in square n.exc 0.5 sqm. in each pane completed all as specified.
S&F 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 sqm in each pane complete all as specified and directed by Engr-in-charge.
S&F galavanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for bed block inserting hold fast of doors and windows complete all as specified and directed.
M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for preparation of new steel surface and applying two coat of synthetic enamel paints over 10 cm width or girth surfaces complete all as specified and directed.
M&L for preparation of new wooden surface of any description over 10cm in width or girth and applying one coat of pink primer and two coats of synthetic enamel paint of any shade complete all as specified and directed.
S&F 100 mm long MS butt hinges cold rolled of medium grade complete all as specified and directed.
S&F 100 mm long SS butt hinges of medium grade complete all as specified and directed.
S&F Continuous (piano) hinges, 40 mm wide mild steel, bright finish or electrogalvanised complete all as specified and directed.
All as per item No-34 above but of brass.
S&F of magnetic catcher of approved quality for cupboard etc double strips (horizontal type) complete all as specified and directed.
S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.
S&F 100 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.
S&F aluminum handle cast type anodized 150mm size complete all as specified and directed.
S&F 100 mm Brass handles, cast type, polished bright complete all as specified and directed.
S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
M&L in repair for Double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
M&L welding in repairs exc 2.5 cm but not exc 5 cm in length thickness of metal to be welded not exc 6mm complete all as specified and directed.
S&F in repair drapery rod fancy type made out of 25mm dia MS PVC coated pipe having wall thickness 0.63 mm bright finish ,with decorative type hard plastic finial as end holders with 02 Nos MS brackets fixed with SS screws or rawl plug complete all as specified and directed.
S&F 150 mm, ordinary rat tail rod pattern springs including roller and roller plate to stone/ concrete/ wooden/ metal chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts or welding, etc. complete all as spd and directed.
M&L for post construction Anti Termite Treatment (ATT) at the points of contact of wood work by chemical emulsion (in oil or jerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as spd and directed.
Taking down of cement or cement lime plaster of any description on brick work or stone walls etc including racking out joints, hacking for key scrubbing down with water etc including removal of debris complete all as specified and directed.
M&L for rendering 15mm thick in cm 1:6 on brick/concrete surfaces finish even & smooth without unsing extra cement etc complete.
M&L for preparation of newly plastered wall surfaces and apply two coat of distemper oil emulsion over a coat of clearcolle primer complete all as specified .
M/s M S Sharma and Co.
saroj constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .