Design, Supply, Transportation, Construction, Installation, Testing, and Commissioning of 3 Nos. of STPS of total 3.0 MLD Capacity at Basugaon ,Bijni MB and Tangla MB using WSP Technology in DBO Mode.

Stage I: Construction of 1.0 MLD Capacity STP in Waste Stabilzation Pond (WSP)Technology and 5 KLD FSTP at Basugaon ULB

Schedule I: Engineering Services : Design Services

Sub Soil Investigation & Survey, Design, Drawings work based on the guidelines laid down in the Manual published by CPHEEO, Ministry of Housing & Urban Affairs and SBM (Urban) 2.0 as per socpe of the work of tender document..

Schedule II: Civil Works for STP of 1.0 MLD Capacity in Waste Stabilzation Pond Technology

Design, supply, construction, installation, testing and commissioning of Coarse screen chamber & Wetwell

Design, supply, construction, installation, testing and commissioning of Inlet Chamber

Design, supply, construction, installation, testing and commissioning of Bar Screen Chamber

Design, supply, construction, installation, testing and commissioning of Grit Chamber

Design, supply, construction, installation, testing and commissioning of Parshall Flume

Design, supply, construction, installation, testing and commissioning of Anaerobic Pond

Design, supply, construction, installation, testing and commissioning of Facultative Pond

Design, supply, construction, installation, testing and commissioning of Disinfection Tank

Schedule III: Civil Works for FSTP of 5 KLD Capacity

Design, supply, construction, installation, testing and commissioning of Sludge Receiving Chamber

Design, supply, construction, installation, testing and commissioning of Inlet Chamber

Design, supply, construction, installation, testing and commissioning of Sludge Drying Bed

Design, supply, construction, installation, testing and commissioning of Leachate Sump

Design, supply, construction, installation, testing and commissioning of Anaerobic Baffled Reactor

Schedule IV: Electrical Work for STP and FSTP

Design, supply, erection, testing and commissioning of all Electrical works for STP including electric cables, MCC panel, main panel, earthing, Cable trench, Cable tray, Gland and lugs, internal lighting & exhaust system external lighting, campus lighting, etc and all other associated works as per Employer's Requirements

Schedule V :Power Connection for STP & FSTP

Providing electrical power connection of required kVA to STP & Lifting station site including drawal of electrical power line from the nearby APDCL Grid, setting up of required capacity Sub-Station, providing electrical control panel & metering unit etc. and obtaining necessary approval & load sanction from APDCL and payment of supervision & other charges to APDCL

Schedule VI: Electro Mechanical works for STP and FSTP

Design, supply, erection, testing and commissioning of all Mechanical works for STP including Coarse Bar Screen, Fine Stainless-Steel Screen, Raw Sewage Transfer pump from STP Inlet Wet Well to Pre-treatment Units, Chlorine Dosing Pump, Chlorine Dosing tank agitator, Electro-Magnetic Flow Meter, Pen stock gate/sluice gate valve for inlet sewage For Coarse Screen Chamber Inlet Gate, Pressure Gauge, Level Sensors (For All Pumps), Pipe & fittings with all accessories, PH meter, Dissolved Oxygen Meter, Valve & fittings, etc and all associated components installed and completed in accordance with the Employer's Requirements.

Schedule VII: Interception and Diversion (I&D) Work

Design, Construction, testing & Commissioning of Coarse Screen Chamber and Sump Well for Convey System with required dimensions for STP as per design specification Including Excavation in all types of Strata, filling available excavated earth excluding rock, disposing of material, dewatering with providing & supplying, binding, reinforcement as per design requirement for Construction of R.C.C M30 Well staining internal & external surface, railing, MS ladder, etc. complete and any other works as directed by Engineer in charge/employer.

Design and construction of Pump house in B.B. Masonry common bricks in C.M. 1:4, including 15 mm cement plaster, M.S. shutters, Doors, Windows, with oil bound washable distemper internal & external surface with all complete as per Employer's Requirements.

Design, supply, laying, hydro-testing, and comissioning of Raw Sewerage Main line for STP for required length which includes RISING MAIN, GRAVITY MAIN and Manhole Chamber (Bricks & RCC) including excavation in trenches, dismantling of all type of pavements, sand bedding as required, backfilling of trenches and foundations with approved grade excavated materials and approved graded river sand as required including loading and unloading , Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, hydro-testing complete for I&D system as per Technical Specifications and direction of Engineer/Employer.

Road Restoration for interception and Diversion, laying of Raw Sewer line with all respect as per specification of concerned authority and as per the direction of Engineer-in-Charge.

Schedule-VIII: Infrastructure Works

Design, installation, testing and commissioning of the Deep Tube Well arrangement as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.

Design & Construction of Internal Path and Approach Road, complete in all respects, as directed by the Engineer-in-Charge/Employer.

Design & Construction of Boundary Wall / Fencing along with Entrance Gate at Treatment plant, as directed by the Engineer-in-Charge/Employer.

Design & Construction of office building including Panel, DG and Store Room as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.

Schedule IX: Five Year O&M (Operation and Maintenance (after completion of Capex work and trial & satisfactory commissioning of complete project)

Operation & Maintenance of the entire Sewerage Treatement project including Manpower, chemicals and material, repairing of all components as required, repair to pipeline leakages, road restoration for the repairing works, painting of civil or non-civil structures (if any), retrofitting works of the civil structure wherever necessary and management of STP, pumps and motors, pumping stations including mechanical, electrical panels, necessary accessories. It also includes activities for maintenance of campus development, laboratory, etc. for 5(Five) years.(APDCL Energy Charges will be borne by the ULB)

1st year of Operation and Maintenance

2nd year of Operation and Maintenance

3rd year of Operation and Maintenance

4th year of Operation and Maintenance

5th year of Operation and Maintenance

Stage II: Construction of 1.0 MLD Capacity STP in Waste Stabilzation Pond (WSP)Technology and 5 KLD FSTP at Bijni ULB

Schedule I: Engineering Services : Design Services

Sub Soil Investigation & Survey, Design, Drawings work based on the guidelines laid down in the Manual published by CPHEEO, Ministry of Housing & Urban Affairs and SBM (Urban) 2.0 as per socpe of the work of tender document..

Schedule II: Civil Works for STP of 1.0 MLD Capacity in Waste Stabilzation Pond Technology

Design, supply, construction, installation, testing and commissioning of Coarse screen chamber & Wetwell

Design, supply, construction, installation, testing and commissioning of Inlet Chamber

Design, supply, construction, installation, testing and commissioning of Bar Screen Chamber

Design, supply, construction, installation, testing and commissioning of Grit Chamber

Design, supply, construction, installation, testing and commissioning of Parshall Flume

Design, supply, construction, installation, testing and commissioning of Anaerobic Pond

Design, supply, construction, installation, testing and commissioning of Facultative Pond

Design, supply, construction, installation, testing and commissioning of Disinfection Tank

Schedule III: Civil Works for FSTP of 5 KLD Capacity

Design, supply, construction, installation, testing and commissioning of Sludge Receiving Chamber

Design, supply, construction, installation, testing and commissioning of Inlet Chamber

Design, supply, construction, installation, testing and commissioning of Sludge Drying Bed

Design, supply, construction, installation, testing and commissioning of Leachate Sump

Design, supply, construction, installation, testing and commissioning of Anaerobic Baffled Reactor

Schedule IV: Electrical Work for STP and FSTP

Design, supply, erection, testing and commissioning of all Electrical works for STP including electric cables, MCC panel, main panel, earthing, Cable trench, Cable tray, Gland and lugs, internal lighting & exhaust system external lighting, campus lighting, etc and all other associated works as per Employer's Requirements

Schedule V :Power Connection for STP & FSTP

Providing electrical power connection of required kVA to STP & Lifting station site including drawal of electrical power line from the nearby APDCL Grid, setting up of required capacity Sub-Station, providing electrical control panel & metering unit etc. and obtaining necessary approval & load sanction from APDCL and payment of supervision & other charges to APDCL

Schedule VI: Electro Mechanical works for STP and FSTP

Design, supply, erection, testing and commissioning of all Mechanical works for STP including Coarse Bar Screen, Fine Stainless-Steel Screen, Raw Sewage Transfer pump from STP Inlet Wet Well to Pre-treatment Units, Chlorine Dosing Pump, Chlorine Dosing tank agitator, Electro-Magnetic Flow Meter, Pen stock gate/sluice gate valve for inlet sewage For Coarse Screen Chamber Inlet Gate, Pressure Gauge, Level Sensors (For All Pumps), Pipe & fittings with all accessories, PH meter, Dissolved Oxygen Meter, Valve & fittings, etc and all associated components installed and completed in accordance with the Employer's Requirements.

Schedule VII: Interception and Diversion (I&D) Work

Design, Construction, testing & Commissioning of Coarse Screen Chamber and Sump Well for Convey System with required dimensions for STP as per design specification Including Excavation in all types of Strata, filling available excavated earth excluding rock, disposing of material, dewatering with providing & supplying, binding, reinforcement as per design requirement for Construction of R.C.C M30 Well staining internal & external surface, railing, MS ladder, etc. complete and any other works as directed by Engineer in charge/employer.

Design and construction of Pump house in B.B. Masonry common bricks in C.M. 1:4, including 15 mm cement plaster, M.S. shutters, Doors, Windows, with oil bound washable distemper internal & external surface with all complete as per Employer's Requirements.

Design, supply, laying, hydro-testing, and comissioning of Raw Sewerage Main line for STP for required length which includes RISING MAIN, GRAVITY MAIN and Manhole Chamber (Bricks & RCC) including excavation in trenches, dismantling of all type of pavements, sand bedding as required, backfilling of trenches and foundations with approved grade excavated materials and approved graded river sand as required including loading and unloading , Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, hydro-testing complete for I&D system as per Technical Specifications and direction of Engineer/Employer.

Road Restoration for interception and Diversion, laying of Raw Sewer line with all respect as per specification of concerned authority and as per the direction of Engineer-in-Charge.

Schedule VIII: Infrastructure Works

Design, installation, testing and commissioning of the Deep Tube Well arrangement as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.

Design & Construction of Internal Path and Approach Road, complete in all respects, as directed by the Engineer-in-Charge/Employer.

Design & Construction of Boundary Wall / Fencing along with Entrance Gate at Treatment plant, as directed by the Engineer-in-Charge/Employer.

Design & Construction of office building including Panel, DG and Store Room as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.

Schedule IX: Construction of Community Level Soak Pit System.

Design and Construction of Community Level Soak Pit System at ward no - 1 & 2 with Screen Chamber, Settling Tank, Soak Pit as per the standard engineering practice outlined in the CPHEEO Manual and IS 2470 & all complete as per Employer's Requirements.

Schedule X: Five Year O&M (Operation and Maintenance (after completion of Capex work and trial & satisfactory commissioning of complete project)

Operation & Maintenance of the entire Sewerage Treatement project including Manpower, chemicals and material, repairing of all components as required, repair to pipeline leakages, road restoration for the repairing works, painting of civil or non-civil structures (if any), retrofitting works of the civil structure wherever necessary and management of STP, pumps and motors, pumping stations including mechanical, electrical panels, necessary accessories. It also includes activities for maintenance of campus development, laboratory, etc. for 5(Five) years.(APDCL Energy Charges will be borne by the ULB)

1st year of Operation and Maintenance

2nd year of Operation and Maintenance

3rd year of Operation and Maintenance

4th year of Operation and Maintenance

5th year of Operation and Maintenance

Stage III: Construction of 1.0 MLD Capacity STP in Waste Stabilzation Pond (WSP)Technology at Tangla ULB

Schedule I: Engineering Services : Design Services

Sub Soil Investigation & Survey, Design, Drawings work based on the guidelines laid down in the Manual published by CPHEEO, Ministry of Housing & Urban Affairs and SBM (Urban) 2.0 as per socpe of the work of tender document..

Schedule II: Civil Works for STP of 1.0 MLD Capacity in Waste Stabilzation Pond Technology

Design, supply, construction, installation, testing and commissioning of Coarse screen chamber & Wetwell

Design, supply, construction, installation, testing and commissioning of Inlet Chamber

Design, supply, construction, installation, testing and commissioning of Bar Screen Chamber

Design, supply, construction, installation, testing and commissioning of Grit Chamber

Design, supply, construction, installation, testing and commissioning of Parshall Flume

Design, supply, construction, installation, testing and commissioning of Anaerobic Pond

Design, supply, construction, installation, testing and commissioning of Facultative Pond

Design, supply, construction, installation, testing and commissioning of Disinfection Tank

Schedule III: Electrical Work for STP

Design, supply, erection, testing and commissioning of all Electrical works for STP including electric cables, MCC panel, main panel, earthing, Cable trench, Cable tray, Gland and lugs, internal lighting & exhaust system external lighting, campus lighting, etc and all other associated works as per Employer's Requirements

Schedule IV :Power Connection for STP

Providing electrical power connection of required kVA to STP & Lifting station site including drawal of electrical power line from the nearby APDCL Grid, setting up of required capacity Sub-Station, providing electrical control panel & metering unit etc. and obtaining necessary approval & load sanction from APDCL and payment of supervision & other charges to APDCL

Schedule V: Electro Mechanical works for STP

Design, supply, erection, testing and commissioning of all Mechanical works for STP including Coarse Bar Screen, Fine Stainless-Steel Screen, Raw Sewage Transfer pump from STP Inlet Wet Well to Pre-treatment Units, Chlorine Dosing Pump, Chlorine Dosing tank agitator, Electro-Magnetic Flow Meter, Pen stock gate/sluice gate valve for inlet sewage For Coarse Screen Chamber Inlet Gate, Pressure Gauge, Level Sensors (For All Pumps), Pipe & fittings with all accessories, PH meter, Dissolved Oxygen Meter, Valve & fittings, etc and all associated components installed and completed in accordance with the Employer's Requirements.

Schedule VI: Interception and Diversion (I&D) Work

Design, Construction, testing & Commissioning of Coarse Screen Chamber and Sump Well for Convey System with required dimensions for STP as per design specification Including Excavation in all types of Strata, filling available excavated earth excluding rock, disposing of material, dewatering with providing & supplying, binding, reinforcement as per design requirement for Construction of R.C.C M30 Well staining internal & external surface, railing, MS ladder, etc. complete and any other works as directed by Engineer in charge/employer.

Design and construction of Pump house in B.B. Masonry common bricks in C.M. 1:4, including 15 mm cement plaster, M.S. shutters, Doors, Windows, with oil bound washable distemper internal & external surface with all complete as per Employer's Requirements.

Design, supply, laying, hydro-testing, and comissioning of Raw Sewerage Main line for STP for required length which includes RISING MAIN, GRAVITY MAIN and Manhole Chamber (Bricks & RCC) including excavation in trenches, dismantling of all type of pavements, sand bedding as required, backfilling of trenches and foundations with approved grade excavated materials and approved graded river sand as required including loading and unloading , Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, hydro-testing complete for I&D system as per Technical Specifications and direction of Engineer/Employer.

Road Restoration for interception and Diversion, laying of Raw Sewer line with all respect as per specification of concerned authority and as per the direction of Engineer-in-Charge.

Schedule VII : Construction of Community Level Soak Pit System.

Design and Construction of Community Level Soak Pit System at ward no - 4 with Screen Chamber, Settling Tank, Soak Pit as per the standard engineering practice outlined in the CPHEEO Manual and IS 2470 & all complete as per Employer's Requirements.

Schedule VIII: Infrastructure Works

Design, installation, testing and commissioning of the Deep Tube Well arrangement as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.

Design & Construction of Internal Path and Approach Road, complete in all respects, as directed by the Engineer-in-Charge/Employer.

Design & Construction of Boundary Wall / Fencing along with Entrance Gate at Treatment plant, as directed by the Engineer-in-Charge/Employer.

Design & Construction of office building including Panel, DG and Store Room as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.

Schedule IX: Five Year O&M (Operation and Maintenance (after completion of Capex work and trial & satisfactory commissioning of complete project)

Operation & Maintenance of the entire Sewerage Treatement project including Manpower, chemicals and material, repairing of all components as required, repair to pipeline leakages, road restoration for the repairing works, painting of civil or non-civil structures (if any), retrofitting works of the civil structure wherever necessary and management of STP, pumps and motors, pumping stations including mechanical, electrical panels, necessary accessories. It also includes activities for maintenance of campus development, laboratory, etc. for 5(Five) years.(APDCL Energy Charges will be borne by the ULB)

1st year of Operation and Maintenance

2nd year of Operation and Maintenance

3rd year of Operation and Maintenance

4th year of Operation and Maintenance

5th year of Operation and Maintenance