CA NO GE/AFJ-07/21-22 REPAIR/REPLACEMENT OF INTERNAL WIRING ELECTRICAL FITTING AND FIXTURES AT KALUCHAK UNDER GE AF JAMMU

Amount

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

M&L for point wiring for light/fan/Bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC new conduite with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc

All as per item No.2 above but for one multipin 5 amps socket outlet on same board.

All as per item No. 2.00 above but for one multipin 5 amps socket outlet on independent board

All as per item No. 2.00 above but with 2.5 sqmm cable and 1.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

Supply and fixing in repair switch piano button flush type, single pole one way 5 amps incl taking down old unserviceable one. complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5 pin socket outlet 2 in 1, 3 pin, 5 amps flush type complete all as specified and as directed by Engineer-in-Charge.

Supply and fixng 5 pin switch socket combination 2 in 1, 5 amps flush type complete all as specified and as directed by Enggineer-in-Charge.

Supply and fixing switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and as directted by Engineer-in-Charge.

Supply and fixing ceiling rose, 3 phase on PVC square blocks surface bakelite 65 x 50 mm, 3 terminal complete all as specified and as directed by Engineer-in-Charge

M&L for sub main wiring with two run of 6.00 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and of 25 mm dia & 4.00 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth duly complete all as specified and as directed incl taking down old unserviceable one. Make of wire-- Finolex/Havells/Plaza.

M&L for sub main wiring with two run of 4.00 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than1.2 mm thick and of 25 mm dia & 4 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth duly complete all as specified and as directed incl taking down old unserviceable one. Make of wire-- Finolex/Havells/Plaza.

Supply and fixing MCB distribution board Double door SPN 230 volts 12 way with 200 amps rated bus bar, concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down the old DBs incl taking down old unserviceable one. Make: Cat part No 5076 12 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door SPN 230 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down the old DBs incl taking down old unserviceable one. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down the old DBs incl taking down old unserviceable one. Make: Cat part No 5076 10 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing Distribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar. Make-Legrand Cat pt No 5077 20 or equivalent of make L&T / Merlin Gerin multi-9 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface incl taking down the old DBs incl taking down old unserviceable one. all as required at site or directed by Engr-in-Charge. (Note: MCB's and MCCB will be measured and paid seperately under relevent items)

Supply and fixing switch piano button flush type, single pole one way 5 amps complete all as specified and as directed by Engineer-in-Charge

Supply and fixing flush type fan regulator 230V, electronic rotary stepped increase complete all as specified and as directed by Engineer-in-Charge

Supply and fixing Call bell ding dong AC, 23 Volts, single pole type complete all as specified and as directed by Engineer-in-Charge

Supply and fixing lamp holder insulated body with back plate for batten fitting with LED lamp 08 watt complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 2'x2' LED Panel 36/40 watt, Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, powder coated white CRCA full glow LED light fitting including 3 core flexible wire from ceiling rose to fitting etc. all as specified and directed by Engineer-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE (ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the department. Make: VENUSNEOHE2X2PLR36WLED8XXS of Havells or equal approved in C&S/Syska

Supply and fixing LED tube light fitting 18/20 watt wall mounted LED batten with polycarbonate housing & integrated electronic driver as per CAT PART No LUMILINEBS20WLED865SPCWH of Havells or equivalent of Bajaj/Crompton/Wipro complete all as specified and as directed by Engineer-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE (ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the department.

Supply and fixing LED tube light fitting 9/10 watt wall mounted LED batten With polycarbonate housing & integrated electronic driver as per CAT PART No LUMILINEBS9WLED830SPCWH of Havells or equivalent of Bajaj/Crompton/Wipro complete all as specified and as directed by Engineer-in-Charge. Note :(i) A certificate from the manufactures for warranty minimum upto 3 years shall be obtained and submitted to the AGE/GE (ii) Any touch up of the existing surface due to changing of fittings shall be done by contractor with similar surface finish without extra cost to the department.

Supply and fixing MCB SP 5 to 32 Amps, 230 V A/C including taking down old unserviceable one complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4085 87 to 4085 95 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 32/40 Amps, 230 V,AC including taking down old unserviceable one complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 09 to 4086 17 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 63 Amps, 230 V,AC including taking down old unserviceable one complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 20 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB TPN 63 Amps 230 V ,AC including taking down old unserviceable one complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 61 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing Fan capacitor 2.5 mfd including taking down old unserviceable one complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully the existing unserviceable ceiling / Exhaust fans/ Wall mounted fan of any make/ model and sweep from different sites in the building for overhauling / servicing after disconnecting carefully cleaning and checking unserviceable components, and replacing the defective components such as bearing, rubber bush/bolt, gunmetal bush, capacitor burnt windings flexible cord, shaft and painting etc., including assembling after lubricating the movable components and installing in its original position connecting, testing and commissioning all as specified and directed by the Engineer-in-charge. Note:- Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.

M & L for rewinding of ceiling fans 1200/1400mm sweep of any make/model, including removal of existing burnt windings carefully from the slots,cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enmelled copper winding wire of same gauge/same number of turns as that of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings and applying air dry insulating varnish and drying the windings including replacing the defective components such as bearing, gun metal bush,rubber bush/bolt, capacitor,flexible cord, shaft and painting including assembling after lubricating movable components complete including testing complete all as specified and directed for :- Note :-(1) Fan will be issued from AGE E/M store yard through gate pass.(2) Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.

All as per item no 30 above but exhaust fan of 450/375/300mm sweep of any model/make.

All as per item no 30 above but pedestalt fan of any sweep of any model/make.

All as per item no 30 above but Wall mounting fan of any sweep , any model/make.

Supply only fan motor 150W 1500 RPM suitable for Exhaust fans of any Sweep any make / model all as specified and directed by the Engineer-in-charge.Make CG

Supply only fan motor 150W 1500 RPM suitable for Padestal fans of any Sweep any make / model all as specified and directed by the Engineer-in-charge.Make CG

Supply only fan motor 90W 1500 RPM suitable for Wall Mounting fans of any Sweep any make / model all as specified and directed by the Engineer-in-charge.Make CG

Supply only ball bearing suitable for any fans of any Sweep any make / model all as specified and directed by the Engineer-in-charge.Make TATA, SKF

Supply only gunmetal bush suitable for ceiling fan / wall mounting fan of any make/model/ sweep of 1200/1400 mm and Exhaust fan of any sweep all as specified and directed by the Engineer-in charge.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the Air Force station area

M/S GRD ENGINEERS

M/S RAJ ENGINEERS

M/S VIDYA ENTERPRISES

M/s Raj Construction