PROVN OF BLACK TOP ROAD APPROX 200 MTR FROM ASCON NODE UDHAMPUR TO RNC UDHAMPUR OF 511 NSC (NW SIG COY) OF 51 NW SIG REGT UNDER GE (SOUTH) UDHAMPUR

Rough excavation not exc 1.5 m deep and and getting out in any type of soil complete all as specified.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base, complete all as specified and as directed.

Rolling and consolidating formation surface with 8 to 12 tonne power rolling , including filling in soft sports, hollows and depressions etc. which occurs during rolling ( for portion coming in cutting/original ground only ) to required level gradient or camber etc. including watering before or during rolling complete all as specified.

Soling (or sub base), 150 mm thick (spread thickness), with broken boulders or quarried stone (granite/ basalt) including filling of interstices, surface formed and rolled and consolidated to required gradient and camber, complete all as specified and directed.

150mm thick (Compacted thickness) WBM in two layers 75mm thick each layer with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) of granite, trap or basalt spreading and compaction with 8 to 10 tonne power roller and consolidated to required gradient and camber complete all as specified and directed.

Preparing un-surfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., and applying evenly a priming / tack coat on un-surfaced water bound macadam surfaces with cationic bitumen emulsion RS-1 grade ( 80 -100 penetration) @ 10 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed.

Supply and fixing cat eye yellow colour of ABS plastic metal with two Nos of reflectors including fixing with approved adhensive/ fastener on road as in repairs including taking down of existing complete all as specified and as directed.

S&F in replacement Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed with stem self illuminating in dim areas during night time . Solar rechargeable batteries for continual performance without much maintenance . Super bright LEDs with a viewing distance of 500 meters . Equipped with prismatic reflective lens on each side ensure maximum reflectivity make up of highly compressive material cosustain over 10 tonne water resistant.

S&F in replacement Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.