Repair Renovation of IEI of Qtr No Ty IV JG 171 at Junglighat under SD I PBND APWD Port Blair SW Renovation of IEI to 01 No Type IV Quarter Qtr No JG 171 at Junglighat under Section III of E and M Sub Division Workshop Division APWD Port Blair

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

a) Group B

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b) 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

a) 1 Pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

a) 5/6 A switch

b) 3 pin 5/6 A socket outlet

c) 15/16 A switch

d) 6 pin 5/6 A & 15/16 A socket

e) Telephone socket outlet

f) TV antenna socket outlet

Supplying and fixing of PVC switch board 3-in-1 S.S cutting board of size 3.5" x 6" for piano type switch & socket in surface Make: Press Fit Code No.563111/Precision/Anchor or equivalent etc as required.

Supplying and fixing of PVC switch board 2 way- 16 amp cutting baord . of size 4" x 7" for piano type switch & socket in surface Make: Press Fit Code No.563161/Precision/Anchor or equivalent etc as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying of LED MS batten with decorative end cap complete with retrofit T8 polycarbonate/Glass Tube Make:- C&S, TARA -M/20W Cat. No.LTDC01220WLED/WD, 1x 20W MS white powder coated decorative LED T8 Batten with PC tube 20W- 4FT White/Bajaj/Havells /Philips/Crompton or equivalent in technical specification complete with all accessories etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of AC ceiling fan 1200mm sweep Make :-USHA TECHNIX FLAIR W/O REG WH 1 Star C /Bajaj/Crompton/Ortem/Khaitan/Havells/Orient or equivalent in technical specification complete with all accessories etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of Exhaust fan 250mm sweep Plastic Ventillation Fans Make:- Crompton Model No. Ventilus 10" (Ivory, White, Black, Brown)/Havells/Orient/Bajaj or equivalent in technical specification complete with all accessories etc as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

a) Upto 450 mm sweep

Supplying of LED Bulkhead fitting Make:- Philips EnduraLED bulkhead Cat.No.WT202W LED6S NW PSU S2 PC /Havells/Bajaj/Crompton/C&S /Philips or equivalent in technical specification complete with all accessories etc as required.

Supplying of 7 watt LED mirror light fitting Make:- Crompton LINNET Cat.No.LCL-07-CDL/Havells/Bajaj/Philips/C&S or equivalent in technical specification complete with all accessories etc as required.

Supplying of 12 W LED GLOBE decorative wall light fixture made up of Polycarbonate Make:- Havells Cat No. LHFOFUE1TZ1W012 and LED New adore 3W B22 WW Ball lamp Havells Cat.No.LHLDERUEMD8X003/ Bajaj/Crompton/Philips/C&S or equivalent in technical specification complete with all accessories etc as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 8 way (4 + 24), Double door

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

Supplying, installation, testing and commissioning of ASHLOK make SEE brand safe earthing electrode type-19, 50mm dia, length 2 mtrs (short time current -52.6 rms for 1 sec, peak-125.6) with back fill compound including providing masonary enclosure with cover plate having locking arrangement etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of SMC Sintex box of size 570 mm x 280mm x 220mm (inside diamension) Code No. GSJB-5728 or equivalent in technical specification with 03 Nos. cut-out 100A/415V etc. as required.

Supplying, installation, testing and commissioning of electric instantaneous water heater of 3 litres Make:- Bajaj Model No. Flora 3L IWH 3KW/Havells/Voltas/Crompton or equivalent in technical specification complete with all accessories etc as required.

M/s Sameer Decorative Corner

M/s G K Construction

M/s Island Sales Enterprises

POWER ENGINEERING CO

ELECTRICAL PLAZA

M K ENGINEERING

JOY GURU ENTERPRISES

M/s Sai Electrical Works

DILIP RAJ