Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹89,000Accepted-Finance HOUSING COLONY UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-Finance Lowest | |
| 2 | L2₹1.0 L+₹12,500 (14.0%)Accepted-Finance NOT AVAILABLE | L2 | Accepted-Finance Higher than L1 | |
| 3 | L3₹1.0 L+₹14,400 (16.2%)Accepted-Finance BHAGWATI NAGAR JAMMU | L3 | Accepted-Finance Higher than L1 | |
| 4 | L4₹1.1 L+₹18,400 (20.7%)Accepted-Finance 25 PRATAP COMPLEX GULAB SINGH MARG JAMMU | L4 | Accepted-Finance Higher than L1 |
Tender Value
₹1.0 L
Closing Date
5 Jul 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer MICD Jammu
O/O Executive Engineer MICD Jammu
repair/replacement of electro-mechanical equipments with allied works at LIS Miari and LIS Nud Behra of MICSD Jammu
2022_IFC_176369_1
eNIT NO MICD/J/31 OF 2022-23 DATED 27/06/2022
Open Tender
Electrical and Maintenance Works
Item Rate
15 days
Akhnoor
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Executive Engineer MICD Jammu
Exempted
15 Jul 2022
28 Jun 2022
6 Jul 2022
28 Jun 2022
5 Jul 2022
28 Jun 2022
Amount
a) Repairs to damaged 75HP ATS of unit-II of LIS Miari by way of disconnecting of ATS from the incoming and outgoing cables, The job involves dragging/ carriage of diamantled ATS towards road side by head load and Loading of same by means of Mech. Transport and its shifting to the workshop for repair purpose. The job involves Complete dismantling of the ATS in workshop and extraction of damaged ATS coils from the tank and draining of the T oil from the tank and storing it in barrels. Complete rewinding of the coils and lowering the same in the tank, filling the demosturised T oil in the tank and topping up with fresh T oil 15 litres. Dismantling of all the burnt/damaged parts of starter and P/f of new contact points, fixed and moving. Repairs to its moving mechanism done by p/f of sleeve to the moving rod. P/f of no volt coil 1no. Reassembling of all the parts of the starter. Shifting back to the site and fitting back at the installation position. Making all the electric connections done and then Testing of starter on no load and then on full load. Complete job includes cost on account of material and labour charges which includes to and fro carriage and its handling charges. b) Repairs to 200mm dia foot valves of LIS Miari by way of dismantling of choked suction pipes along with foot valve and cleaning of mud/silt from pipes using special tool and tackles. Complete dismantling of 2 no. foot valves and replacement of leather washer / RI sheet cleaning foot valve properly along with strainers, adjustment of flips by adjusting and repairing the hinge arrangement. Reassembling of the foot valve and refitting of the suction pipes along with foot valve at their respective places by P/F of RI sheets with nuts bolts. P/f welding of new foot valve of 50mm dia for priming pumping set with complete cost of material, carriage, hire charges of tools and tackles along with welding set for execution of complete job at site. c) Dismantling/Servicing of 3 cusec x 38m head horizontal casing pump set coupled with 75H.P motor, 2 no.s at LIS Miari by way of dismantling of the pumps from the base frames, de-coupling from the motor and suction delivery lines. Dismantling the pump at site for extraction of damaged internal parts P/F of new gland packing, nut bolts after cleaning the gland bushes and gland plate sets, applying sufficient amount of grease including gland packing to avoid excessive wear and tear, complete assembling of pump set after carrying out necessary repairs. Re-assembling of pump set at site including cost of material and labour charges etc.Job further includes Repairs/Servicing of motor of 75H.P by way of opening of side covers with the help of tools & tackles/manual labour and then extraction of rotor. Cleaning the stator and applying two alternate coats of varnish and drying each coat by hot air process. Fitting the rotor and greasing of bearings properly. Fitting the end covers. Fitting the damaged cable ends at motor side and thimbling them properly by P/F of copper thimbles of required size. Complete job includes hire charges of tools & tackles, labour charges for skilled/semiskilled labour, mechanical transport charge, cost of material used for execution of job at site. d) Replacement of damaged double kinetic air release valve at LIS Nud Behra. The job involves providing/fitting of new double kinetic air release valve for 300mm dia. rising main in place of damaged one. Complete job include cost of air release valve, transportation charges,hire charges of DG set & fitment /welding charges required at site of LIS etc. e) Repair/servicing to 50HP ATS, of Unit-I &II of LIS Nud Behra. The job involves disconnection of ATS from the incoming and outgoing cables. Complete dismantling of the ATS and then cleaning all the parts with recommended chemicals. Extraction of transformer coil from the tank of each starter and then replacing the damaged parts with the new ones of unit I.Servicing all the moving and fixed points of starters and resistance coil of both the starters, reassembling all the parts and checking for Providing/filling of 20 litres. fresh T-oil, 10 Liters in each starter. Making of all the electric connections & then testing at full load. Job includes labour charges, cost of material and hire charges of tool & tackles required at site and carriage charges. f) Repair to 2HP Mono-block priming pump installed at LIS Nud Behra. The job involves dismantling of priming pump from the 50mm suction line and 40mm delivery line, disconnection of power supply, extraction of rotor from stator. Varnishing the stator with varnish in two coats and then drying the same. Providing/fitting of new bearing in place of damaged and greasing properly. Reassembling the motor. Providing/ fitting of 1No.control valve in place of old damaged valve. Providing/fitting of 50mm dia. foot valve, worn out nuts, bolts, rubber sheet. Complete job includes cost of material, labour charges at site of LIS The Rebate on old damaged parts/scrap should be quoted in the rebate column provided in BOQ
N B Engineering and Electric Works
M/S FASTTRACK ENGINEERS
NATIONAL ELECTRO-MECH COMPANY
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .