Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAccepted-AOC 65 RANJEET NAGAR NEAR SAI HOSPITAL AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Low | |
| 2 | L2₹37.0 L+₹2.7 L (7.99%)Rejected-AOC | L2 | Rejected-AOC High | |
| 3 | L3₹37.9 L+₹3.6 L (10.6%)Rejected-AOC | L3 | Rejected-AOC High |
Tender Value
₹60 L
EMD Value
₹1.1 L
Closing Date
16 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Sachin Jaiswal, IDSE, CWE Chandimandir
HQ CWE Chandimandir
CA NO. CWE/CHD-62/2023-24 REPAIRS AND RESURFACING OF ROADS AT N AREA, K AREA AND HALLOMAJRA UNDER GE CHANDIGARH
2023_MES_617958_1
CWE/CHD-62/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
HQ CWE Chandimandir
Class C category a(v)
8 documents required · 8 mandatory
₹1,000
Yes
GE Chandigarh
₹1.1 L
Yes
6 Jan 2024
9 Sept 2023
21 Oct 2023
9 Sept 2023
16 Oct 2023
2 Oct 2023
10 Sept 2023 - 16 Sept 2023
Amount
Material & labour for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust/dirt complete all as specified and directed.
Material & labour for scarifying or picking gravelled macadam or bitumenous macadam surfaces in area exc 400 sqm and exceeding 50 mm and not exc 100 mm deep complete all as specified and directed
Material & labour for applying evenly a prime coat of Cationic Bitumen emulsion SS1 confirming to IS:8887 at a rate application of 0.9-1 2 kg/sqm on surface of stabilized soil bases/ crusher run macadam as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical spraye complete all as specified and directed.
Material & labour for applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanica sprayer after cleaning of existing surface complete all as specified and directed by Engineer -in- Charge
Providing and laying 30 mm thick (Consolidated thickness (Bituminous Concrete (BC) layer confirming to cluse 507 of MORT&H specification for road and bridge work (Fifth Revision) including cost of corse aggregate,fine aggregate, filler 5.5% binder (paving Bitumen grade VG-30) content by weight of total mix and crushed aggregate of grading 2 , Anti Stripping Agent, WarmMix Additives (quality and grade as sper the approved job Mix Formula)etc cleaning and pre- heating of the mineral aggregate , filler & bitumen to the specific temprature, throughly mixingwith binder of specified bitumen content , Anti Stripping agent ,Warm Mix additives as per mix design in Hot Mix Plant(Batch Type) of 100-120 TPH capacity, carrying the hot mixed materials by meansof tipper,truck, or any other approved and suitable arrangement s, laying the hot premixedmaterials over the prepare surface by meansof paver finisher including manual operation as and when required for propergrade, level and camberthrough rollingwith power roller 8 to 12 tonner smooth wheeled, vibratory and tandemroller with necessary hand packing and pinning to give an even surface, including runnig expense of all plants and machineries, inclusive of proper traffic control during layingto the satisfaction of Engineer -in- charge, required quality control tests at required interval etc complete in all respect complete all as specified and directed by Engin-in- Charge
Notes :- (i) The contractor shall quote the rate against items considering 5.5% VG-30 bitumen content. Job mix formula as per clause No 505.3.3 of MoRT& H specification s for road and bridge work (fifth revision) for bituminous concete shall be got designed from NIT/CTL/Govt Engg College and shall be got approved from GE in writing well before commencement of work without any finincial effect to the department. Also the bitumen content shall not be less than 5.4% by weight of total mix as per clause 507.2.5 of MoRT&H specification (Fifth Revision).(ii) The cost of materials transporation, job mix formula from lab and testing charge for various tests as required are included in the unit rate quoted by the contractor.(iii)Cost of filler i.e rock dust , hydrated lime or cement is deemed to be includedin unit rate.(iv) If qty of binder content is less than the qty as specifiedin respective items of BOQ, it shall be adjusted at supplyonly rates of paving bitumen @ Rs. 45.00 Per Kg and if qty of binder contents is more than the qty as specified in respective itemsof BOQ no adjustment shall e made. (v) After spreading of mix as per clause 507.4.7 of MoRT&H specifications entire surface during the operation shall be rolled with road roller 8-10 tonnes (smooth wheeled) followed with vibratory road roller of 8-10 tonnesstatic weight, followed by finish rolling with 6 to 8 tonnes smooth wheeled tandem roller as per clause No-507.4.8 of MoRT&H specifications (fifth revision ) and the cost of the same shall be deemed to be included in the quoted rate.
Material & labour for repairing to potholes any depth area n.ex 1 sqm sweeping free from dust and mud or water scoring sunken surfaces in roads, path etc cutting around edges at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) appling tack coat with paving bitumen VG-10 @ 5 kg per X sqm ,well rammed and rolled & consolidated with 8 to 12 tonne power roller. Depth of pot holes n.exc 30 mm Complete all as specified and directed
Providing laying & compaction of Bituminous (BM) 50 mm compacted thickness confirming to Clause 504 of MORT&H specifications for road and bridge works (Fifth revision)using mechanically crushed stone aggregates and granual material etc. of grading II as per table 500-7 of MORT &H specifications for road and bridge works (fifth revision) Premixed with bituminous binder, Bitumen grade VG-30 @ 3.5 % (presentage by weight of total mix ) prepared in Batch type Hot mix plant of 100-120 TPH capacity transported to site by tippers , laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade , level and alignment and rollingwith smooth wheeled, vibratory and tandern rollers as sper specification to achieve the desired compaction and density complete all as specified and directed by Engineer -in-charge Notes: -(i) The contractor shall quote the rate against item considering 3.5 % VG -30 bitumen content Mix design for bituminous macadam shall be got designed from NIT/CTL/Govt Engg college and shall be got approved from GE in writing well before commencement of work without any financial effect to the department , Also th bitumen content shall not be less than 3.4% by weight of total mix as per clause 504.2.4 of MORT&H specification (Fifth revision) (ii) If qty of binder contents is less than the qty as specified in respective items of BOQ , if shall be adjusted at supply only rates of paving bitumen @ Rs. 45.00 per kgand if qty of binder contaents is ore than the qty as specified in respective items of BOQ no adjustment shall be made.
Material & labour for making 2.5 mm thick centre line ,side line, stop line , dashes , arrows brackets & similarwork on road surfaces as per IRC pattern with thermo plastic paint of approved quality & make with 20% glassbeads laid at temperature of 160 degree centigrade conforming to BS standard 3262 and laying with a mechanical applicator machine complete all as specifiedand directed.
Supply and fixing in repair solar road stud having 3 LEDs of colours red/yellow to a side (total 6 Nos ) housed in a tough pressure dia casred aluminium alloy housing of size 130 x 120 mm of height 20 mm with built in stem -nail 30 mm x 50 mm long for fixing with epoxy LEDs , solar cells batery & light sensor well protected in side under tough unbreakable polycabonate transparent sheet roof, system workable for 2-3 days (nights) after full charge in 8-10 hours complete all as specified and directed .
Supply and fixing in repair dual directional reflective cat eye aluminium casted stud 100 x 100 mm having micro cube corner speak glow reflector white /red/yellow a side provide with steel zinc plated nail of dia 8 mm of length 75 mm for fixing to road by hammering complete all as specified and dircted.
Supply and fixing in repair acrylic dual directional delinators having 100 mm dia cube corner high intensity reflector (red/yellow/white) holded in strong plastic ABC body mounted over steel tube 47 mm dia of 18 gauge sheet support of total height 600mm with 3 bends reflector green red and yellow having flared/welded foot for firm grip to base .Acrylic reflector and ABS body protected in a welded mesh cage , all steel parts powder coated to make all weather resistant, including embedding in PCC type B1 1:2:4 (using 20mm graded aggregate) of size (150x150x300 MM) complete all as specified and directed
Supply and fixing in repair convex mirror minimum 100cm in dia outdoor type, body material- Polycarbonate, acrylic and mirror thickness not less than 3mm for traffic security purpose mounted on 2 mtr long SS pipe Gde 30G fixed with nut bolt and adjustable brackets/clamp system including necessary excavation and embeded in cement concrete type B1 (1:2:4) (20mm graded crushed stone aggregate) complete as per specification and directed.
Supply and fixing dual direction speed breaker having high intensity cube corner reflector firmly bonded to high impact resistant plastic body of colour yellow and black of size 250 x 700 x 70 mm (height) provided with 4 steel nails, shape of side body to have interlocking pattern to keep all speed breakers in a row compete all as specified and directed
M/s DATAAR BUILDERS
shree balaji builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .