Construction of New Admin Office Room, Ticket counter And Security Room, Entrance arch, Chain link fencing, Toilet and Providing Stone pergola, Gazebos, Electrification and Lighting Arrangements at Sun Garden in Kovalam village, Kanyakumari District

Amount

Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. Refilling the sides of foundation with excavated earth other than sand in layers of well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10m and initial lift of 2m and clearing and leveling the site etc. complete

Supplying and filling in foundation and basement with M - Sand in layers of not more than 15cm thick well watered, rammed and consolidated etc., complete as per standard specification.

Supplying and filling of gravel for basement in layers of not more than 15cm thick well watered, rammed and consolidated etc., complete as per standard specification.

Plain Cement concrete 1:5:10 (One cement five M sand and ten broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete

Plain Cement concrete 1:4:8 (One cement four M sand and eight broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.

Reinforced cement concrete 1:1.5: 3 (One cement one and half M sand and three broken Machine crushed stone jelly) using 20mm gauge hard broken granite jelly for all RCC works such as slabs, beams, footings, staircase waist slabs, steps, landing beams fins, boxing, vertical louver, drops, window sill slabs projection and other similar works including laying curing etc., complete

For Foundation and Basement

For Ground floor upto 4.50 m height

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting steel centering including necessary supports for plane sufaces for Reinforced Cement Concrete works such as column footings, column pedastals, plinth beams, grade beams, staircase steps, etc., which required only nominal strutting using mild steel sheets of size 90cmx60cm and 10 BG stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding, laid over silver oak joists of size 10cmx6.5cm space at about 75cm centre to centre or at suitable intervals etc, complete in all floors complying with standard specification. ( Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete

For column footing, Column pedestals, plinth beam, grade beams, staircase stpes, etc.,

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc

Special ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, stair case steps, landing slabs etc with CM 1:3 (One cement and three M sand) 10mm thick including hacking the surfaces and providing necessary CM nosing, beading as per size specified wherever necessary using the same mix etc., complete complying with standard specification and as directed by the Departmental Officer.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

For New Iron work Two coats including primer

Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Fabricating and supplying and erecting the main gate / Wicket Gate / grill with necessary bolts and nuts including with one coat of red oxide primer and zinc chromate etc., complete complying with standard specification and an directed by the departmental officers.

Plain Cement concrete 1:2:4 (One cement Two M sand and four broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 20mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete

Supplying and fixing in position of "L" angle of size 50x50x 6 mm for vertical post and supporting posts for fixing and tying the barbed wire as per standard specification and as directed by the departmental officers.

Supplying and fixing in position of Chain link (Fencing - TATA Brand or Equivalent)of size 2"x2" using 10 guage binding wire and tying with 2.5 mm GI wire at 0.45m vertical interval from base level (5 lines for 1.80m height) to the entire length of fencing with 2.5 mm GI Barbed wire (5 lines) at a vertical spacing of 0.45 m centre to centre to the entire length of fencing and Barbed wire (3 Lines) For slending portion with equal Intervals to the entire length of fencing and further tigntened with 10 gauge binding wire etc., complete complying with standard specification

Supplying and laying of Interlocking Paver Block Stone 83 mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,

WET MIX MACADAM Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Supply and fixing of precast kerb wall size of 0.3x0.45x0.10m laying with C.M.1:3 including labour charges ,transporation , neatly finshing etc..,,

Supply and fixing in position best quality PVC Soil/ waste pipes of various size having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete. - Below Ground Level

Brick work in following Cement Mortar using best quality of Second class ground moulded chamber burnt bricks 9"x4-3/8"x2-3/4" for foundation and basement including curing etc, complete complying with standard specification.

In cement mortar 1:5

For Foundation and Basement

In Ground floor

Brick partition wall in CM 1:3 (One of cement and three of M sand) 11.50CM thickness using IInd class chamber burned bricks of size 9”x 4 3/8”x2 3/4” and using hoop iron with reinforcement if found necessary etc.., complete

11.50 cm thick Ground Floor

Supply and fixing of Terracota Jally of Size 20cm x 20cm x 7.5cm

Plastering the walls with Cement Mortar 1:5 - 12 mm thick using the M sand including curing and finishing neatly complying with standard specification and as directed by the departmental officers etc. complete.

Paving the flooring with plain ceramic tiles of approved quality, colour and design joint free of size 305x305x6 mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work.

Plain ceramic tiles of size 305 x305 x6 mm

Dadooing the walls with glazed tiles of printed design of best approved quality and colour in all shade of the glazed tiles in all floor over a base layer in cement mortar 1: 2, (one cement two sand) 10mm thick and laid in situ true alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 to suit the colour of the tiles fixed in position without any air gap in the tiles neatly etc., complete complying with standard specification and as directed by the Departmental officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work.

Dadooing with printed design colour glazed tiles of size 300mmx200mmx6mm

Supplying & fixing PVC corner beading (size 10.5mm) for toilets as per the instruction of engineer incharge., Rate including all material, all labour charges,all lead, lift, transportation, taxes etc complete.

Weathering course-using Concrete broken brick jelly 20 mm gauge in pure slacked lime (No sand to be used) over RCC roof slab. The proportion of broken brick jelly to slaked lime being 32:12½ cft well beaten by wooden beaters for giving required slope and thickness required etc complete complying with standard specifications and as directed by Departmental Officers.

For Ground Floor

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm of approved quality laid in CM 1:3 (one cement and three sand) mixed with 2% of water proofing compound by weight of cement used and pointed with the same oiled mortar including mixing of red oxide etc complete complying with standard specifications and as directed by Departmental Officers.

Pressed tiles 23cm x 23cm x 20mm

Supply and fixing PVC rain water down fall pipes of 110 mm dia size 4 Kg/cm2 with necessary shoes, specials, clamps, bends, cowl, screws, nails, teakwood block, etc., complete complying with standard specification and as directed by the Departmental officers.

Rate for 1 RM/ One Floor

Supplying and fixing Solid PVC door shutters using 19 guage 19mm M.S. square tubes for styles and outer PVC frames, 15mm M.S. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter solid panel PVC door with frame

Solid panel PVC door with frame

Supplying and fixing in C.I. Manhole Cover of 0.60x0.60m for ISI mark of materials etc, complete.

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Supplying and fixing 110mm diametre PVC VENTILATING SHAFT 3.00 M height with P.V.C Cylinderical Cowl of 110mm diametre of approved quality and make including providing leakproof joint ,wire mesh fixing with required materials etc., complete as directed by the departmental officers.

Supplying and fixing of PVC WATER TANK of best and approved quality with ISI specification and having inlet,outlet, overflow and clearing pipe arrangements and labour charges for fixing in position with all necessary accessories and transporting at site of work etc., complete complying as directed by the departmental officers.

1000 Litre

Paving the flooring with cuddapah slab of size 50 mm thick both side machine polished edge and machine polished cutting for flooring using CM 1:3 (one cement three M sand) including labour for fixing in position i etc., complete complying with standard specification and as directed by the Departmental Officer

Cuddapah slab 20 to 30 mm thick

Paving the flooring with best approved quality and colour of Double charged Vitrified tiles of size 600x600x8mm over a base layer of cement mortar 1:3(One of Cement and three of sand) 20mm thick and pointing with same colour cement neatly etc., including the finishing the joints and appointing flush with even surfaces etc., as directed complying with standard specifications the tiles should be got approved by the Executive Engineer before use on work.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Window Window: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcement with a thickness of 1mm to have dimensional stablilty. The sash should be of 60x102mm. The mulilion should be of 60x74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass/6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

ABS DOOR / EQUIVALENT Specification: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work

Design Pre-laminated Door

Supplying, laying and joining UPVC pipes of approved quality and best variety conforming to ISS with ISI mark, of the following size External above ground level up to 4 M hight laid properly to alignment including cutting, threading and fixing the required UPVC specials but excluding the cost of such specials and fixing to the wall with necessary TW plugs, clamps and screws, making holes on the wall or drilling holes in the roof and making good dismantled portion to original condition with necessary brick work, concrete and plastering wherever necessary with necessary scaffolding charges etc., complete.

Supplying, laying and joining UPVC pipes of approved quality and best variety conforming to ISS with ISI mark, of the following size External below ground level laid properly to alignment including cutting, threading and fixing the required UPVC specials but excluding the cost of such specials etc., complete.

Supply and fixing in position best quality PVC Soil/ waste pipes of various size having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete. - Above Ground level

Supplying and fixing in position first quality and approved variety gun metal Gate valve (Heavy type)/ Wheel Valve (Heavy Duty) with ISI Mark of approved quality of the following dia including cost of shellac, thread, labour charges for cutting, threading, fixing in position etc., complete complying with standard specification and as directed by the Departmental Officer for both internal and external water supply arrangements.

Gate Valve

Supplying and fixing in position 15 mm dia Brass Chromium Plated Screw down tap (Heavy type) / Pillar tap / Stop Cock of approved make conforming to IS specification and quality including cost of shellac, thread, cutting and threading wherever necessary etc., complete complying with standard specification and as directed by the Departmental officers. (Taps should be got approved by the Executive Engineer before use on the works)

Screw down tap (Heavy type)

Stop Cock

Two Way Blb Cock with Health Faucet

Supplying and fixing in position mirror of size 600x450 mm / 500x400 and 5.5 mm thick of approved quality and brand of size with necessary plastic back, PVC frame with bottom stand of approved color with brass screws, rowel plugs etc., complete complying with standard specification and as directed by the Departmental officers. The quality of mirror should be got approved by the Executive Engineer before use on work.

Supplying and fixing CP/ Aluminium towel rail 600mm long and 20mm diameter with brackets of same materials including cost of teak wood plug and CP screws etc., complete complying with standard specification and as directed by the Departmental officers.

CP Rail

Supplying and fixing new one of best approved quality Porcelain soap tray of size 150 x 100 mm / Porcelain soap dish of size 150x150x 50mm including cost of rowel plug, brass screws etc., complete complying with standard specification and as directed by the Departmental officers.

CP Soap Tray 150 x 100

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550x400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated pillar tap, 32mm dia metre G. M. Wheel valve, 15mm dia brass nipple 15mm dia nylon connection etc. including fixing the wash hand basin in the wall in position with pair of CI brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc. complete complying with standard specification. The quality and colour of wash hand basin and specials should be got approved by the Executive Engineer before use on work.)

With Pedestal

white

Supplying and fixing in position Indian water closet Oriya type of size 580x440mm white glazed earthen ware of approved quality with ‘P’ trap or ‘S’ trap conforming to IS: 2556-part XII with sand cushion and forming flooring all-round the closet using 40mm broken brick jelly in lime concrete 1:2:5(one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, reinforced cement concrete roof/ floor slab and making good the dismantled portion to original condition without leakage etc. complete complying with standard specification and as directed by the departmental officers (The water closet should be got approved by the Executive Engineer before use on work.)

White

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position of Indian make white glazed earthen ware lipped mouth flat back urinal of best approved quality with GI connection of suitable length 32mm bell mouth PVC connection 15mm dia GM wheel wall fixing the urinal in the wall position with necessary TW plug, clamps, screws, shellac etc., including the dismantling the masonry if necessary and redoing the same to its original condition fixing the 15mm dia GI pipe and wheel wall painting the pipe two coats of approved colour of synthetic enamel paint over one coat of primer and etc., and checked without leakage etc complete complying with standard specifications and as directed by Departmental Officers.

White

Supplying and fixing of White Marble partition slab for Urinals of 1200 x 600mm size fixing to wall using 3 nos. of suitable C.P brackets with C.P bolts, nuts, washers, cutting to the shape, polshing to all the exposed surfaces abd edge grinding etc. complete as directed by the dapartmental officers- Refer 0.72 or 1 m2

Supplying and fixing in position Cast Iron Nahini /Floor trap with Stainless steel grating /PVC nahini /Floor Trap with PVC Grating type of size 100x75/75x50 mm with best quality gratings of approved brand fixed over a bed of brick jelly lime concrete 1:2:5(One lime two sand and five aggregate) brick jelly 40mm and finishing with CM 1:3(One cement and three sand) including dismantling masonry wherever found necessary and making good to the original condition and giving connections to the cast iron pipes etc., complete complying with standard specification and as directed by the Departmental Officer

CI / Stainless Steel

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware Gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Supplying and fixing in position of the following PVC specials of heavy type and approved quality and good variety excluding fixing charges complying with standard specification. Fixing charges included in the pipe laying work (The PVC specials should be got approved by the Executive Engineer concerned before use on works).

PVC specials for Sanitary arrangements

Elbow

90mm dia

110mm dia

Door Elbow

90mm dia

110mm dia

90mm dia

110mm dia

90mm dia

110mm dia

110mm dia

Vent Cowl

110mm dia

Supplying and fixing in position of the following UPVC specials of heavy type and approved quality and good variety excluding fixing charges complying with standard specification. Fixing charges included in the pipe laying work (The UPVC specials should be got approved by the Executive Engineer concerned before use on works).

UPVC specials

Elbow

40mm dia

25mm dia

40mm dia

25mm dia

Union

40mm dia

25mm dia

25mm dia

Coupler

40mm dia

25mm dia

Reducer

25mm x20mm dia

Hex Nipple

40mm dia

25mm dia

Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) (SD 20)

Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5AFT switch with continuous earth wire connection of 1.5sq.mm copper wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) (SD 23)

Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point (SD 36)

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 38)

Wiring with 2 x 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed power plug point (SD 40)

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5 sq.mm copper wire with painting of suitable colour (SD 54)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour (SD 56)

Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 6 sq.mm copper wire with painting of suitable colour. (SD 62)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD 65)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 70)

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting (SD 87)

Supply and run of 1 of No.8 SWG GI wire for earth connection. (SD 74)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") (SD 106)

Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete (SD 134)

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)SD 144

Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make) (SD 157)

Same as per SD 175, except for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable ( SD 184)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry(SD 211)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work(SD 212)

Supply and providing cable end termination of 3-1/2x35sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (Sd214)

supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD 448)

supply and fixing of 48W LED street light fitting And 4metre Light Pole with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD 448)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End (SD 507 )

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL

1.5 TR 5 Star Rated

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good (SD 658)

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good (SD 660)

GST at 18 percentage

A2S PROJECTS INDIA PRIVATE LIMITED (BID ID -1412411)