WCT FOR EREC, DISM,TRANS OF POLES,DT,HT/LT LINES AND OTHER EXTENSION WORKS IN NAMBIYUR SUB DIVISION

Amount

Excavation of pole pit upto 27" (8.0 m) Pole by using JCB or manual

Excavation of stay pit 4.5' to 5' depth by using JCB or manual

Excavation of pole pit upto 9.14 mtr Pole by using JCB or manual

Excavation of RSJ pole pit above 36' by using JCB or manual

Excavation of pole/stay pit hard rock requires blasting

Excavation of poles /stay pit hard rock without blasting (where houses are located)

Excavatiion of medium rock and dense medium rock requires blasting

Erection of RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

Erection of RCC poles/Metal poles upto 9.14m.(30') by using JCB or maual

Erection of RSJ joists, fabricated poles above 30'-0" (9.14 m) by using JCB or manual.

Erection of RSJ joists, fabricated poles above 36'-0' by using JCB or maual

Erection of stay set complete

Fixing of HT "V" cross arms(all types) / channel cross arms/guarding Cross arms

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of HT/LT TI Fittings

Fixing of HT pin Insulators 11 KV

Fixing of HT pin Insulators 22 KV

Fixing of HT 11 KV strain disc

Fixing of HT 22 KV strain disc.

Fixing of LT pin Insulator

Fixing of LT shackle

Fixing of Aluminium Knob

Fixing of double channel X arm

Fixing of Guarding Cross arm

Fixing of Tapping Channel Cross arm

Fixing of HT LAS (3 nos)

Fixing of LT LAS (3nos)

Earthing of pole with pin including burying looping and binding.

Paving of conductor,stringing etc.. Complete with 7/4.09 mm ACSR conductor.

Paving of conductor,stringing etc. complete with 7/3.35 mm ACSR 7/3.0 mm AAAC.

Paving of conductor ,stringing etc.complete with 7/2.59 mm ACSR 7/2.11 mm ACSR

Painting of metal poles including cross arms (Single coating)

Painting of numbering of pole with paint and with base painting

Painting of RCC poles including of poles with colour cement

Mass concreting including materials (Cement 1/2 bag + river sand and Blue metals and watering).

Sleeve concreting including materials (Cement 1/2 bag + river sand and Blue metals and watering).

Erection of Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle (Except erection of Transformer)

LT Split neutral guarding

Flat guarding including fixing of 2 Nos. cross arms

HT Guarding

Transporting of poles/Materials/Conductors and other materials (excluding loading and unloading charges) below 8 kms

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)above 8 KM for additional KM.

Loading of poles upto 27'-0"

Loading of poles upto 30'-0"/RSJ Pole

Un loading of poles upto 27'-0"

Un loading of poles upto 30'-0"/RSJ Pole

Loading of cement bag of 50kg

Unloading of cement bag of 50kg

Loading of transformer oil drum with oil 200 Lit.capacity

Unloading of transformer oil drum with oil 200 Lit.capacity

Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m

Loading or unloading of Transformer upto 200 KVA for each

Loading /Unloading of Distribution Transformer above 200 KVA for each

Erection of New Transformer upto 200 KVA

Erection of new transformer above 200 KVA

Replacement of failed transformer upto 200 KVA

Replacement of failed transformer above 200 KVA

Erection of 16 KVA DT with single pole structure

Erection of 25 KVA DT with single pole structure

Erection of 40 KVA DT with double pole structure

Loading & Erection of HT metering set

Manufacturing of special type clamps for rail poles RS joists,tobolar pole special clamps for distribution transformer structure

Fixing of top channel

Fixing of cross bracing

Earthing of DP complete

Conversion of pin point to cut point-LT: Dismantling of LT Pin

Conversion of pin point to cut point-LT: Fixing of LT Shackle

Conversion of pin point to cut point-LT: Dismantling of Aluminium Knob

Conversion of pin point to cut point-LT: Removing the pins

Conversion of pin point to cut point-HT: Fixing the strain disc

Conversion of pin point to cut point Re-Sagging (HT) 7/4.09mm

Conversion of pin point to cut point Re-Sagging (HT) 7/3.35mm

Conversion of pin point to cut point Re-Sagging (HT) 7/2.59mm

Erection of street light including fixure fitting

Erection of street light service

Fixing of new SV/MV lamp fittings

Releasing of grills from RCC Poles

Painting of transformer (only one coat)

Erection of D.P. structure with AB switch top channel, cross brancing, HG fuse set, earthing painting earthing painting, providing stay and pole concreting

Labour charges for alteration of back clamps

Labour charges for alteration of stay clamps

Erection of new earth pipe by replacing the corroded earth pipe

Providing LT bus bar arrangement in distn. Trs. Structure location

Fixing of meter on LV side of DT with CT

Fixing of meter on LV side of DT without CT

Cutting of flat

Cutting of channel

Cutting of Angle

Cutting of pipe

T.I.Fitting welding with clamps

RS joists pole one cut and one welding

Dismantling of RCC poles/metal poles upto 8.00m (27') by using JCB or manual

Dismantling of RCC poles/metal poles upto 9.14m (30') by using JCB or manual

Dismantling of RSJ joists,fabricated poles above 30' 0" (9.14m) by using JCB or manual

Dismantling of RSJ Joists,Fabricated poles above 36'-0' by using JCB or manual

Dismantling HT "V" Cross arms (all types) / channel cross arms /guarding corss arms

Dismantling LT3 Phase cross arms

Dismantling LT Single phase cross arm

Dismantling of HT/LT TI Fittings

Dismantling of HT Pin Insulators 11 KV

Dismantling of HT Pin Insulators 22 KV

Dismantling of 33 KV Pin insulator

Dismantling of HT 11KV Strain disc

Erection of new 10' Earth pipe replacing the carroded earth pipe and renewal of earthing including burying looping and binding

Releasing of ACSR/AAAC conductors from conductor drum and coiling ACSR 7/3.35,7/2.59,AAAC 7/2.50,7/3.15MM (Per/Km)

Releasing of ACSR/AAAC conductors from existing line and coiling ACSR 7/3.35,7/2.59,AAAC 7/2.50,7/3.15MM (Per/Km)

Cutting of coconut leaves

Drilling of holes in channel only 3/4" & 1" per pole

Set right the leaning pole in HT/LT at Pin Point location

Set right the leaning pole in HT/LT at cut point

Resagging of lines for all sizes at cut point location per wire/span and dismantling of existing HT/LT line

SRI DEVI AMMAN AND CO