CE/Commn/UDD/04 /2018-19/ 26

Amount

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of nmasonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres) Dismantling Brick / Tile work In cement mortar

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of nmasonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres) Cement Concrete Grade M-15 & M-20

Removing all type of hume pipes and stacking within a lead of 1000 metres including earthwork and dismantling of masonryworks. © Above 900 mm

Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table (300-2 ( Including cost of testing of materials at site and laboratory as directed by the deptt.)

Granular Sub-Base with Coarse Graded Material ( Table:- 400-2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density,complete as per cl. 401 II. for grading- II Material (inclusive of all leads & lifts to work site)

Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fillup the interstices of coarse aggregate,watering and compacting to the reqd. density Grading- II Using Screening Type-B (11.2mm Agg.)

Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fillup the interstices of coarse aggregate,watering and compacting to the reqd. density Grading- III Using Screening Type-B (11.2mm Agg.)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratoryas directed by the deptt.) III)With Bitumen emulsion CRS-1

Open - Graded Premix Surfacing (Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen to required line, grade and level to serve as wearingcoarse on a previously prepared base, including mixing in a suitable plant laying and rolling with a smooth wheeled roller 8-10 T capacity to yhe reqd. level and grade.( Including cost of testing of materials at site and laboratory as directed by the deptt.) With anti stripping agent as per IS:14982( Refer Appendix-5 of MoSRT&H specification) Mechanical method using Penetrationgrade Bitumen (60/70 or VG- 30Garde)andHMP of appropriatecapacity not less than 75 tonnes / hour

Seal Coat (Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fallusing Type A and B seal coats) ( including carriage up to initial lead of 5.0 km from quarry )( Including cost of testing of materials at site and laboratory as directed by the deptt.) Case - II : Type B (Providing and laying of premix seal coat with HMP of appropriate capacity not less than 75 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of 60/70 or VG-30 grade.)

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.Ordinary soil A. Manual Means (I) Without dewatering (ii)depth up to 3m

Sand Filling in Foundation Trenches as per Drawing & Technical Specification

PCC 1:3:6 in Foundation(Plain cement concrete 1:3:6 nominalmix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork. (N) Without plasticiser © RCC Grade M 20 Case I Using concrete mixer

Plain/Reinforcedcement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork (N) Without plasticiser B RCC Grade M 20 Height up to 5M Using concrete mixer

Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification' including steel shuttering formwork. (N) Without Plasticiser (A) RCC Grade M20 Using concrete mixer For solid slab super-structure Ht. upto 5m

Supplying, fitting and placing TMT IS:1786 (Fe 500) bar reinforcement in substructure complete as per drawing and technical specifications IS:1786 (Fe 500) Primary producer (TATA/SAIL/Essar Steel/Jindal/Shyam Stell or equvalent)

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification Sandy material

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification

Pusphas Construction Pvt Ltd

Sikander Hayat Ahmed