Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹44.3 LAccepted-AOC 15 JOGENDRA NATH GHOSAL ROAD P S BELGARIA KOLKATA 700 057 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700057 | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹46.1 L+₹1.2 L (2.60%)Rejected-AOC | 2 | Rejected-AOC NOT L1 BIDDER | |
| 3 | 3₹47.1 L+₹2.2 L (4.83%)Rejected-AOC | 3 | Rejected-AOC NOT L1 BIDDER | |
| 4 | 4₹49.3 L+₹4.4 L (9.74%)Rejected-AOC KANTHADHAR P O ICHAPORE NAWABGANJ DIST NORTH 24 PARGANAS PIN 743144 WB | ICHAPORE NAWABGANJ | NORTH 24 PARGANAS | WEST BENGAL | 743144 | 4 | Rejected-AOC NOT L1 BIDDER | |
| 5 | 5₹50.9 L+₹6.0 L (13.4%)Rejected-AOC | 5 | Rejected-AOC NOT L1 BIDDER |
Tender Value
₹46.1 L
EMD Value
₹92,200
Closing Date
31 Jan 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
SPL REPAIR TO OTM 14 (SM BARRACK) OF INF BN AT SALT LAKE ALONG WITH CERTAIN MINOR WORKS AT SQAE COSSIPORE UNDER GE (N) KOLKATA
2024_MES_637026_1
8320/23-24/GE(N)/KOL/E8 OF 2023-24
Open Tender
Miscellaneous Works
Item Rate
210 days
SQAE
AS PER TENDERDOCUMENNT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹92,200
Yes
16 Feb 2024
11 Jan 2024
1 Feb 2024
12 Jan 2024
31 Jan 2024
24 Jan 2024
Amount
Taking down/ dismantling loose/ damaged concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris outside the premises complete all as specified and as directed.
Demolition of reinforced concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, and similar suspended work (reinforcement cut as required to facilitate demolition) with necessary scaffolding and protection as required complete all as specified and as directed.
Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 1 & 2 here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified and as directed.
Applying only two coats of “Epoxy zinc rich primer” as protective coat to exposed surface of old and new reinforcement over 10 mm dia complete all as specified and as directed.
All as per item No. 4 above but reinforcement upto 10mm dia. Note for Item No 3 to 4: (i) Cost of chemicals i.e. Solvant free epoxy, Epoxy zinc rich primer and cement shall be measured and paid separately under appropriate item. (ii) The work shall be carried out by the trained person as per manufacturer's instructions i.e. FOSROC/ SIKA/ PIDILITE/ IWL
Supply only epoxy zinc rich primer. Make : Nitozinc primer of FOSROC/Friazinc R of SIKA/ or equivalent in PIDILITE/ IWL
Supply only Solvent free Epoxy concrete bonding agent. Make : Nitobond EP of FOSROC/Carbodur of SIKA/ or equivalent in PIDILITE/ IWL
Supply, mixing and application of two component structural grade polymer modified reinstatement mortar (upto 25 mm average thickness), where local spalling has taken place or shuttering is not possible . The mortar can be applyied in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadiene emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength of 24 N/mm2, minimum tensile strength of 3.5 N/mm2, minimium flexural strength of 6.5 N/mm2 complete all as specified and directed.
Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed
Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.
Material and labour for TMT deformed bar or twisted bars upto 10mm dia as in stirrups cut to length bent to shape required including cranking, bending etc. and lapping, welding as directed to the existing one complete all as specified and as directed.
Material and labour for providing reinforced cement concrete (1:1½: 3) type A1 (using 20mm graded stone aggregate) as in chajja, facia, railing and parapet complete all as specified and as directed. Note: Reinforcement and formwork shall be measured and paid separately.
Material and labour for providing reinforced cement concrete (1:1½: 3) type A0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture as per manufacturers instructions as in columns, pillars, piers, beams, posts and struts complete all as specified and as directed. Note: Reinforcement and formwork shall be measured and paid separately.
All as per item No. 13 above but in slab, landing, balcony and similar items. Note: Reinforcement and formwork shall be measured and paid separately.
M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.
M&L for use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.
M&L for use and waste of formwork to sides and soffits of chajja, troughs etc. for rough finished concrete surfaces complete all as specified and as directed.
Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc. including finishing the surface even and fair without using extra cement complete all as specified and as directed.
Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.
Supply only water proofing liquid admixture for concrete and mortar complete all as specified and as directed. (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.
All as per item no. 22 above but other than fair faces of brickwork complete all as specified and as directed.
Material and labour for 5 mm thick plastering in CM (1:3) on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
M&L for complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and applying 3mm thick birla wall care putty and appling two coats of oil bound distemper over a coat of alkali resistant primer to wall complete all as specified and as directed.
All as per item No. 27 above but in ceiling complete all as specified and as directed.
M&L for applying 3mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall to newly plastered surface complete all as specified and as directed.
All as per item No. 29 above but in ceiling complete all as specified and as directed.
Material and labour for applying one coat of synthetic enamel paint to old painted wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and as directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.
Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed
M&L for 40mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) and finishing the surface even and smooth without using extra cement in floor complete all as specified and directed.
Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exc. 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles complete all as specified and directed.
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.
Material and labour for glazed ceramic coloured tiles 300 x 450 x 7mm thick as in skirting/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in pavement/ plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed.
Supply and fix in repair one pieced-white wash basin without pedestal 550 X 400 (oval/ square pan) a/w brackets / MS nuts and bolts for fixing; fixed with and incl 32mm dia brass CP waste coupling and connecting waste pipe etc. complete all as specified and directed.
Supply and fix in repair 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed.
S&F in repair CP Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.
Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed.
Supply and fix in repair 10 litre capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm complete all as specified and directed.
Supply and fix in repair Vitreous china Urinal bowl type flat back, size 465 X 355 X 265mm white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.
Supply and fix in repair rotational moulded polyethylene water storage tanks (multi layer) 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.
All as per item No. 50 above but 20mm bore complete all as specified and as directed.
Supply and fix 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cmsq fixed to walls, ceiling or in floors etc. complete all as specified and directed.
All as per item No 52 above but 20 mm outer dia complete all as specified and as directed.
Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fix in repair stop cock concealed type of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.
Supply and fix in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 300gms) complete all as specified and directed.
Supply and fix in repair brass chromium plated shower rose of 125mm size fixed to 15 mm dia pipe all as specified and directed.
Supply and fix in repair shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour ( min weight 40 gms ) complete all as specified and as directed.
Supply and fix in repair chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.
Refixing of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm with old serviceable builders hardware articles/ with new builders hardware articles if any. (Note: Old serviceable shutter obtained from item No 62 above shall be reused).
Supply and fix 2nd class hardwood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
Supply and fix 35mm thick 2nd class hardwood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003 (Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.
Supply and fix 35mm thick 2nd class hardwood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/ gauge etc. (without sash bars) edges of framing plain, chamfered or rounded and mitred, beads for securing glass etc. the size of members of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary formwork complete all as specified & directed.
Supply and fix mild steel work as in holdfast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.
Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebates and openable window shutter frame including joining cleat for fixing etc. complete all as specified and directed.
M&L for powder coated anodised aluminium window ( glazed or gauged) and ventilator shutters, openable type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.
Supply and fix powder coated anodised aluminium glass louver / ventilators with blades of 10mm heavy duty with lever handle etc. complete all as specified and directed. (Note- Glass shall be measured and paid separately)
Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed.
Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.
Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.
Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.
Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.
Taking down old unserviceable steel windows frame with shutters of any description complete all as specified and as directed.
Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work complete all as specified and as directed.
Supply and fix 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 sqm in each pane fixed to steel frame complete all as specified and as directed.
Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.
Material and labour for cementitious grouts mixed with admixture around water spouts, CI pipes / PVC pipes of any dia complete all as specified and as directed. (Make : Cebex 100 of Fosroc/Intraplast EP of SIKA/ IWL or equivalent brand of PIDILITE)
Supply and fix in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.
Supply and fix in repair PVC(SWR) bends 110 mm dia. complete all as specified and directed.
Supply and fix in repair PVC(SWR) branch piece, single T equal or unequal 110 mm dia complete all as specified and directed.
Dismantling cast iron drain pipes jointed in cement mortar obtained either from trenches/ wall as required complete all as specified and as directed. (Note : Excavation if required, shall be measured and paid separately)
Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.
Supply and fix in repair 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.
Supply and fix 100mm bore cast iron cowls complete all as specified and as directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.
Material and labour for brickwork with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for brickwork with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM (1:4) complete all as specified and directed.
Supply & fix in repair decorative/ fancy type curtain rods of length not exceeding 1.5m made of aluminium/ brass alloy of 20 mm dia. alongwith fancy brackets and necy fixtures complete all as specified and directed.
Supply and fix 25 mm bore GI tubing, medium grade with all new fittings as required complete fixed to walls and ceilings or laid in floors including taking down old unserviceable GI pipes and testing complete all as specified and directed.
Supply and fix 25mm bore gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe and fixed after taking down old unserviceable one complete all as specified & directed.
Material and labour powder coated alumiium (minimum thickness of powder coating 50 mivron) work for doors, windows, ventilators and partitions (fixed portion) with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS:733 and IS:1285, fixing with dash fastners of required dia and size inclding necessary filling up the gaps at junctions, ie., at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, CP brass/ Stainless steel screws, complete all as specified and directed.
Supply and fix 5.50mm thick sheet glass ordinary quality, glazing with aluminium beads in square/ rectangular exceeding 0.5 sqm in each pane fixed to aluminium frame complete all as specified and as directed.
Supply and fix 6mm thick Aluminium composite panel (ACP) board as in panelling with sluminium partitions, complete all as specified and directed.
Supply, fabricated and fixing with premium plus High Density Moisture resistant (HDMR) premium board one side decorative lamination and other side balancing shite, 100% termite proof, 20mm thick heavy density exterior grade cutting, fabricting and suitable fixing for kitchen cabinets and shelves of any size drawers openable leaf complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as specified and directed as under : - (a) Stainless steel handle fancy type 100mm size. (b) Stainless steel hinge Italian pattern suitable for cabinet and shelves opening/ closing operation. (c) Magnet of suitable size fixed for cabinet leafs, drawers. Make : Century Ply board. Note : The rate includes BWP Ply board and all connecting items mentioned above and the design and pattern should be approved by GE.
Supply only stainless steel handle fancy type 100mm size and compelte all as specified and directed.
Supply only stainless steel hinge Italian pattern suitable for cabinet and shelves opening/ closing operation and complete all as specified and directed
Supply only magnet catchers suitable size for cabinet leafs and drawers and complete all as specified and directed.
Taking down carefully copper/ aluminium point wiring (light, fan, call bell, socket or power) complete, including fittings and fixtures such as switches, ceiling rose, pendants, holders, regulators, sockets, light fitting etc. & removing from site and making good the disturbed surfaces of wall, ceiling etc. complete all as specified and directed.
Material and labour for point wiring (concealed type) with PVC insulated FRLSH cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/ fan point controlled by one way modular switch complete all as specified as directed.
All as per item No. 110 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches complete all as specified and directed.
All as per item No. 110 above but for one 3/5 pin 6 Amps socket outlet on the independent board complete all as specified and directed.
All as per item No. 110 above but for one light point controlled by two 2 way modular switch complete all as specified and directed.
Material and labour for point wiring (Concealed type) with FRLSH PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and directed.
Supply and fix modular switch 1 way, 6 A, 1 module complete all as specified and directed.
Supply and fix modular switch 1 way, 16A, 1 module complete all as specified and directed.
Supply and fix socket 6A 2/3 pin combined 2 module complete all as specified and directed.
Supply and fix socket 6A/ 16A, 2/3 pin combined 2 module complete all as specified and directed.
Supply and fix modular switch 2 way, 6 A, 1 module complete all as specified and directed.
Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and directed.
Supply and fix modular type electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed. .
Material and labour for sub-main wiring (Concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including taking down old sub main wiring with conduit complete all as specified and directed. (Note: Three runs of 4.0sqmm copper conductor and One run of PVC conduit shall measured as one unit i.e RM)
Material and labour for sub-main wiring (Concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including taking down old sub main wiring with conduit complete all as specified and directed. (Note: Three runs of 6.0 sqmm copper conductor and one run of PVC conduit shall measured as one unit i.e RM)
Supply and fix 4 way vertical type TPN DB in double door suitable for four pole MCCB as incomer including making good to damaged surface of wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed. Note:- MCCB shall be measured and paid separately.
Supply and fix MCCB four pole 63 amps, 415 volts, 16 KA, with all incoming / outgoing connections suitable for fixing to 4 way vertical type TPN DB in double door with proper size of aluminium lugs complete all as specified and directed.
Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 12 way with 200 amps rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable one complete all as specified as directed.
Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 8 way with 200 amps rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable one complete all as specified as directed.
Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 4 way with 200 amps rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable one complete all as specified as directed.
Supply and fix MCB single pole & neutral, 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed.
Supply and fix MCB single pole, 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming/ outgoing connections with proper size of lugs complete all as specified and directed.
Supply & fix LED tube light fitting, 1 x 18 watt, 4 feet, 220 volt AC, decorative type with driver holder and LED lamp including connecting up with three core flexible cable copper conductor including taking down old unserviceable light fitting complete all as specified and directed.
Supply & fix LED tube light fitting, 1 x 10 watt, 2 feet, 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible cable copper conductor including taking down old unserviceable light fitting complete all as specified and directed.
Supply and fix LED Building security light fitting, 35 Watt, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including taking down old unserviceable light fitting complete all as specified and directed.
Taking down ceiling fans of 1200/ 1400mm sweep & refixing safely alongwith its connected accessories like fan hook, clamps, fasteners etc. complete all as specified and directed.
Taking down wall mounted fans of 450mm sweep & refixing safely alongwith its connected accessories clamps, fasteners etc. complete all as specified and directed.
Taking down Exhaust fans of 300mm sweep & refixing safely alongwith its connected accessories like fan motor, louvers,clamps, fasteners etc. complete all as specified and directed.
Taking down Decorative light fittings & refixing safely alongwith its connected accessories like clamps, fasteners etc. complete all as specified and directed.
Taking down Geyser electric water heater & refixing safely alongwith its connected accessories such as safety valve, hot and cold connection pipes, fasteners, clamps etc. complete all as specified and directed.
Material and labour for chases cutting in brick/ stone/ concrete surfaces girth, exc. 10cm and not exc. 20cm for concealed wiring and the like, making the surface good to match the existing in CM (1:3) etc. complete all as specified and directed.
Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/ loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old earthing complete all as specified and directed.
Supply and fix GI wire as earth continuity conductor including taking down old unserviceable earth wire compleate all as specified and directed.
Supply and fix GI pipe 15 mm bore (dia), light grade for protection of earth electrode including taking down old unserviceable GI pipe complete all as specified and directed.
Supply and fix single pole and neutral enclosure 240 volts, 20 Amps with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed.
Supply and fix automatic voltage stabilizer single phase 220 volt 50 hz of capacity 5 KVA complete all as specified and directed. Make : Microtec/ V-guard
Supply and install hi wall split unit indoor/outdoor complete with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality with minium 3 star ratin and EER 3.2 of capacity 1.5 TR, complete all as specified and directed. Makes of AC : LG / Samsung / Voltas / Videocon/ Hitachi / Daikin /As per existing.
NANDYENTERPRISES
PUJA ELECTRICALS
Friends Trading Co
MOTHER LUMIER INDUSTRIES
MASTER BUILDERS
M/S MAHENDRALALL DUTTA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .