WBPWD/AE/KMCESD/NIQ-21/25-26

A) Distribution wiring:- Dismantling old wiring/DB/Main switch/Cables/LT panel etc maintainning normalcy and mending good the damages and carry away scrap material from site as per direction of EIC and deposit necessary useful material in section office .

Distribution wiring in 1.1 KV grade 3x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make-- Glostar/KEI/Havells) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with piano key switch in Powder coated (CEC make)MS box complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed) a. Av. run 10 mtr

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make-MMS] on wall, ceiling with saddles and other accessories as required and mending good damages to building works (PWD Schedule Page- E-16/Item-7) 20mm dia.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make-- Glostar/KEI/Havells) in prelaid 20mm size PVC rigid conduit 'FR' (Precision make) /polythene pipe incl. necy. fittings as required (P-E9/Item-1) 2 x 1.5 sqmm + 1 x 1.5sqmm copper wire

SUPPLY OF LIGHT FITTINGS :- Supply & Delivery of Single LED tube light fittings. (Philips T.M.C 502P 1xT-LED22W/Wipro WIO921208P/ Lighting Technology) complete with 1 no. 18/20 Watt LED tube tube (PHILIPS - LEDTUBE 18W 2100 1m 865 T8 (ve) / Wipro LL13 - 181 - 65 SESL1 - G1 / Lighting Technology)

FIXING OF LIGHT FITTINGS :- a.Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. (Page-C2/Item-17)

b.Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.(Page-C2/It.-16)

SUPPLY OF FANS :- S & D 230V, 80 Watt, 1420 RPM heavy exhaust (Make -- EPC/ USHA, S.Ph TURBO Heavy duty, 1400RPM,ISI Grey/ Orient Heavy duty/CG EXHD300-4-1) of following sizes a) 12" (30mm)

FIXING OF FANS :- Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 30 cm Exhaust fan (12")

Fixing only 12' dia exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter (PWD Schedule Page -C-4/Item-28b)