Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹5.1 L
EMD Value
₹15,000
Closing Date
18 Nov 2026, 4:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Directorate of Municipal Administration
Manjunatha D H
Installation and fixing Of 5 nos Decorative poles at MG Circle near Ooramma Temple at Harihar CMC limit
DMA/2026-27/EL/WORK_INDENT62354
DMA/2026-27/EL/WORK_INDENT62354
Open
Electrical
Electronic Documents, First(One Cover)
DMA City Municipal Council Harihara
6 documents required · 3 mandatory · 3 optional
₹500
₹15,000
6 Nov 2026
6 Nov 2026
17 Nov 2026
Installation and fixing Of 5 nos Decorative poles at MG Circle near Ooramma Temple at Harihar CMC limit
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm,...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm,...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm,...
Supplying & fixing-flexible LED Strip Light. .W Power consumption in 5 ms length CCT6500 degree The operating in put voltage should be between 130 to 275V. BIS Approved with 2 years Warranty against a...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Supplying and fixing of 63 A Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers ( PWD ELE SR 2023-24 P.NO. 14, I.NO.5.7.3)
Supplying and fixing of 4 pole power contactor with NO/NC Contacts on existing wood/panel board using necessary bolts, nuts washers and wiring etc., complete with AC-3 Rating and as per IS 13947: 60 A...
Supplying and fixing Micro Processor based Asronomical Timer swith With using necessary bolts nuts and washers ( PWD ELE SR 2023-24 l P.NO. 21, I.NO.5.48)
supplying & fixing miniature circui tbreakers on existing MCB distribution board susing necessary fixing materials and' C' Type curve, indicator ON/OFF, energy cross-3with Short circuit breakingc apac...
Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating. In soil (hard) KPWD Banglore CIRCLE ELE SR 2019-20 P.No.41 I.No.6.6.2)
Supplying fixing and wiring earth electrode for groundingof lifts, transformers, DG setsetc .using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable sizere ducer fixe donthe...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied over an under coat of primer applied of approved brand and manufacture includingpreparing the surface after ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Kw-1_ 6lakhs.doc
Tender Document • 1.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .