WBPHED/59_01/EE/BOLMD/2024-25

Amount

Supply, delivery at site and storage of bourdon type Gauges with 150 mm dia cast aluminium dial with SS internal Siphon Tubes, DN 15 mm GI Impulse line withThree Way Cock etc.

Pressure Gauge ( 0 - 10 kg / sq.cm )

Supply, delivery at site and storage of electro magnetic flow meter with separate transmitter, 20m interconnecting cable for measuring flow of clear water. Flow sensing element shall have IP68 degree of protection, Flow transmitter shall be operated with 220V and shall have flow rate and flow totalizer.

Nominal Dia. : 125 mm

Supply,delivery and storage at site of automatically controlled diaphragm type Chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10 kg/CM2 with all accessories for pump & motor, foundation bolt, suction and discharge flange and with storage tank of dosing solution of 100 Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P., 3 Phase, 1450 RPM, squirrel cage TEFC induction motor, Motor will be IE3. T.C. & G.C. of pump & motor needed.

Supply, delivery at site and storage of following materials :-

200 A Re-wireable type TPN main Switch.

200 A 4Pole offload change over switch.

200 A 4way copper busbar chamber box by 16SWG sheet steel enclosure including porcelain chair etc. with painting complete.

200 Amps Kit-kat rewireable proceliain fuses carrier & base (Specification-IS:2086).

Supply, delivery at site and storage of following XLPE insulated Armoured 1.1KV grade Al. Conductor Cables.

3.5C 50 sq.mm 1.1KV grade XLPE Al. Ar. Cable for WBSEDCL Meter to Main Switch, Main Switch to Bus Bar Chamber, Bus Bar to Stabilizer Input, Stabilizer Output to Change Over Switch, Change Over Switch to PDB Incomer.

3C 16 sq.mm 1.1KV grade XLPE Al. Ar. Cable for Pump Motor to Panel.

Indoor and out door illumination by supplying and fitting necessary materials as follows- drawing of 1C 2.5 & 1.5 sq.mm and running earth by 0.5 sq. mm 1.1KV grade PVC insulated stranded copper wire through PVC casing (31 points of avg. Run of 15 mtrs), high bay LED with suitable fixture, having 10 k lumen- 03 nos, 1.5 mtrs LED tube- 6 nos, 36 W wall mounted LED fixture- 6 nos, 380 mm dia heavy duty five star rating exhaust fan-2 nos ,600 mm dia heavy duty five star rating pedestral fan-1 nos,1200 mm dia anti dust energy efficient ceilling fan- 3 nos, out door LED with suitable fixture - 6 nos, 15 A and 5 A power plug , necessary sheet steel DB with suitable MCBs,piano type switches,boards, regulators etc. required to complete the job.

Supply, delivery at site and storage of earthing for lighting protection materials consisting of 50mm x 6mm main earth grid,-4Nos. of 50mm dia. X 3000mm long GI pipe for earth electrode, 25mm x 3mm GI Flat required length for round the roof of the pump house and required no. of proper length of GI spike as per IE rules and direction of EIC for lighting protecton including earth pit chamber with cover (4Nos.)

Supply, delivery at site and storage of 3 Core 4 sq.mm water proof Flat Submersible Cable.

Supply, delivery at site and storage of 3 Core 10 sq.mm Al. Ar. XLPE Cable for Incomer for 3 Nos. Submersible Pump.

Supply, delivery and storage of following valves, pipes and gadgets etc. at site: (a) 80 mm Dia UPVC Standard type column pipe (Cream colour with both side threaded and one end side socket with register KPMG).

3 Mtr long

1.5 Mtr long

80 mm dia CI top and bottom adopter

Making MS fabricated sealed type top cover of 200mm/suitable dia ground tube well made of 12 mm thick MS plate with suitable hole for entry 80 mm dia column pipe and 40mm/suitable dia pipe cable protection entry and necessary drill holes on the peripheral srface of the top cover for fixing on the tubewell flanged(Supply and welding with tubewell) and fittings of the heavy type MS pipes specials and valve properly including all joints and specials as per direction of EIC.

80mm dia. Non-rising spindle sluice valve (PN-1.0 rating) as per IS14846 for wash out line, MOC & TC needed for valve.

80mm dia. N.R.V (PN-1.0 rating) as per IS5312, MOC & TC needed for valve.

CIDF 90°bend-1no., CI flanged tee-1no. blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1 mtr. 1 no. etc (as per IS specification and certification registered) for construction of delivery pipe line and wash out line.

Suitable kiox box for cable connection of submersible pump motor set with Degree of protection IP 65 including suitable legs and 3 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5')

Laying of three cables up to 35 sq.mm in an underground trench in single tier formation (horizontal) the trench size : 915 mm x 760 mm average depth with brick protection on the top of each cable with 8 nos. bricks per Mtr. and 4 nos. bricks per mtr. as separator between the cables including filling the space between the bricks and cables and also the trench with shifted soil, levelling up and restoring surface duly rammed.

Laying of one Nos. cable up to 35 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (Eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Making brick pillar 0.25 x 0.25 x 0.75 Mtr/Suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete.

Installation of Submersible Pumping machinery to newly sunk tubewell along with column pipe (as requried), top cover, Valves, and Specials of above with protection pipe,and supply of MS clamp,nut bolt, cable gland, sockets etc. making interconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necessary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC. (Pump Supplied Deptly)

Installation and commissioning of the above supplied Chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone, chips] and neat cement finish by supplying of all required materials and testing the entire set as per direction of EIC. [Power will be feed from PLC panel of pumping machinery]

Supply and delivery at site of GI octagonal street light pole conical type 7 mtr. Length (Top dia 70mm,bottom dia 130 mm,Thick 3mm Base plate 220x220x12mm,Foundation Bolt M20x700 with template and Anchor Plate,bracket Single Arm Bracket 1500 mm long on single side with 48.3 OD GI pipe.& internal junction box (6A,SP MCB & 4-way Connector )resin coated.

Single arm pole.

Double arm pole.

Supply and delivery at site of energy efficient LED Smart Bright street light fixture with IP66 and IK06 protected LM high pressure alluminium di cast housing with polycarbonate cover capable of delivery standard lumen output as follows .The lens plate should be bolted to the metal core PCB should not be glued . The driving current should be more than 700 mA . It should have internal surge protection of minium 4kv , lumen /watt >100, Drivier efficiency > 85% ,PF >0.95, THD<10%.

Philips BRP409 LED 110 CW M2 FG PSU GR V3./Similar

Supply and delivery at site of 1.1 KV grade 2 core 4 sq.mm XLPE insulated Al. Ar. Cable Conforming to IS:7098(Part-I) 1988 for outdoor lighting along with manufactures test certificate. Supply of cable as per actual requirement at site.

Erection of GI octagonal pole of length of 7 meter in RCC(1:2:4) foundation of 400x400mm of depth of 1300 mm below GL and 200 mm just above GL. 4 nos "J" type foundation bolt of 20 mm dia and 600 mm long grouted into RCC foundation as per base plate of pole.Projected length of 100 mm also considered for fitting with the base plate of the pole.There should be a provision of two number flexible pvc pipe of 63mm dia for cable entry as per supplied drawing.Also the foundation along material will be made as per departmental drawing and design.

Laying of one No. cable up to 35 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Fitting fixing above supplied LED light fitting complete with all accessories to be fixed with S&F length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required complete.

Earthing with 1no. Of G.I. earth spike (20 mm dia. X 1.5 mtr. Long) driven into the ground upto 2 mtr.. drawing earth line with separate 6 SWG G.I. Wires providing 15 mm dia. G.I. pipe protection from earth spike feeder box/junction box/poles and fixing to the same by suitable nuts & bolts all complete as per direction of EIC.

Add: @ 18% GST of Sl. No:1.00 to Sl. No:28.00

Add: @ 1% Cess of Sl. No:1.00 to Sl. No:29.00

DEY ENTERPRISE (BID ID -5759156)

ORIENTAL ENGINEERING CO. (BID ID -5747340)