138WE/L-79/2021-22

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) ,removing servicable one to store and rubbish off the premises

M&L for (350mmx250mmx7mm/450mmx350mmx 7mm thick ) coloured ceramic tiles set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thick rendering below tile for dado/skirting CM 1:4.

Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land.

Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded stone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes.

M&L for 7mm thick non skid coloured ceramic tiles (area of each tile exc 0.11and nexc 0.18 sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.complete all as specified and directed.

M&L for 7mm thick non skid coloured ceramic tiles (area of each tile exc 0.06 and nexc 0.11sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.

M & L for Chequered cement concrete tiles, machine pressed, factory made of size 300mmx300mmx20mm thick, set, jointed and pointed in neat cement slurry, with grey cement and pigment, laid in floors, over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base .

Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia

S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors.

S&F PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints,laid in trenches or in floors cement complete all as specified

S&f 75mm bore PVC (SWR) pipe bends any radius

S&F PVC (SWR) 110mm bore bends any radius, complete all as specified

S&F PVC (SWR) 110mm bore junction single (single T), complete all as specified

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal

M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement

S&F PVC (SWR) 75mm bore vent cowl complete all as specified

S&F PVC (SWR) 'S' trap 110mm bore for EWC

M&L for salt glazed stone ware gully traps, square or round mouthed ,type P of size 150x100mm set and jointed to drain pipes with cement mortar 1:1 including demolition piped complete pipes

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MD land.

M & L PCC 1:3:6 type C2 using 40mm graded aggregate in surface channels and drain, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc.

Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames

Ditto-all as per item No 25 above but n.exc 1.50 Sqm

S&F IInd class soft wood as in plian solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints

S & F 35mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

M&L for 30mm thick IInd class soft wood glazed and skelton shutters as in windows open rebated and prepared to receive glass gauge etc,divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitered beads for securing glass gauge etc :sizes of members of shutters as spfd in SSR Part I ,section 8 , clause 8.24(b) .

M&L steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed by Engr-in-Charge.

S&F only 200mm long aluminium anodised barrel tower bolt of extruded section in old or new position

S&F aluminum door handle cast type 150 mm in old or new position

S&F 100mm long mild steel medium weight but hinges cold rolled.

S&F 375mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete

S&F Harrison rails, anodised aluminium alloy, with fixing brackets, stops, rollers etc.

Hacking out old broken glasses (Any thickness, size quality, description) from wooden or steel frames fixed with putty or wooden beads.

S&F 3mm thick glass sheet oridinary qlty n.exc 0.5 sqm in each pane in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc.

Ditto - all as per item No 37 above but Pin Headed glass.

Taking up or down steel tubing 20mm bore including cleaning for refixing or removal to store. complete all as specified.

Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store. complete all as specified.

S&F 20mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

S&F in repairs for viterous china wash hand basin (Pedestal type) flat back size 600x480mm excluding traps, waste , chain , plug and porcelain stopper incl brackets,complete all as specified.

S&F in repair 10 ltrs capacity incl PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe complete all as specified

S&F in repairs viterous China wash down water closet pan (pedestal pattern white (excluding flushing cistern and flush pipe) all as specified.

S&F PVC connection 15mm bore with ptmt nuts of length 600mm all as specified

S&F in repairs 15mm bore bib taps fancey type chromium plated with capstan head chromium plated screwed down screwed for iron pipe or brass ferrule. (Minm wt 350 Gms)

S&F in repairs 15mm bore pillar tap fancy type cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe.

S&F in repairs 15mm bore stop cock fancy type chromium plated cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule.

S&F Grating doom 125 mm with waste hole of PTMT all as specified

S&F Tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs (fixed in repair),complete all as spfd and directed by Engr-in-charge.

S&F in repairs PVC waste pipe 32mm bore with cup and washers complete on new or old locations.complete all as specified.

S&F Wall mixer 3-in-1 system with provision for both hand shower and overhead shower completewtih 115mm long bend pipe connecting legs and wall flange (without hand & over head showers) (fixed in repair), complete all as specified and as directed.

S&F Angular stop cock with wall flange, with accessories set (fixed in repair), complete all as specified and as directed.

S&F Toilet roll holder with flap, with accessories set (fixed in repair) , complete all as specified and as directed.

S&F Shower rose, 125mm face dia brass chromium plated including C.P. arm, screwed suitable for 15mm bore of GI pipes with swivel joints, (fixed in repair) complete all as specified and directed by Engr-in-charge.

S&F PVC bath cabinet of size 450x450mm (minimum) with sliding/ openable mirror built in PVC shelves, complete of approved make (fixed in repair), complete all as specified and directed by Engr-in-charge.

M&L for two coat of cement base paint on old decorated surfaces of walls including preperation of surfaces

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern.

S&F 0.63mm thick galvanised mild steel sheets with two corrugation side lap fixed with J or L hooks with grade of zinc coating 275 all as specified.

Ditto - all as per item No 61 above but fixing only

S&F 0.8mm thick plain galvanised mild steel sheeting and in ridges hips, valley gutters etc conforming to class VIII all as specified.

M&L for two coats of synthetic enamel paint on new/previous untreated corrugated steel surfaces including preparation over a coat of red oxide Zinc chrome primer with modrant solution complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old steel surfaces and old CGI sheeting roof.

M&L for one coat of synthetic enamelled paint on old decorated wooden surfaces including preperation

M&L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified.

M&L for two coat of cement base paint on old decorated surfaces of walls including preperation of surfaces

M&L for providing precast reinforced cement concrete type A1, 1:1.5:3 using 20mm graded aggregate as in landings, cover slabs (for man holes etc) and similar articles with plain faces and setting in cement mortar 1:6 complete with joints to match including use of necessary formwork . Note : S&F reinforcement shall be measured and paid separately.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia

S&F TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia

Demolition of brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for precast cement concrete block masonary using PCC 1:3:6 type C-1 , using crushed stone 20mm graded aggregate ,set and jointed in cement martar 1:6

M&L for PCC 1:4:8,type D-2 using 40mm graded crushed stone aggregate as in sub base and mass conc.

Taking down cement plaster on brick/pcc block or conc surfaces including racking out joints hacking for key, scrubbing down with water etc.

M&L rendering 15mm thick in cm 1:4 concrete or brick surfaces as in wall finishes even andsmooth w/o using extra cement incl mixing of wpc .

Supply only Integral waterproofing compound complete all as specified

Excavation in trenches n exc 10Sqm on plan n exc 1.5 m deep and n exc 1.5 m wide , getting out in hard dense soil.

Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness.

Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point.

Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including the pipe inserted in Man holes walls etc. for undermentioned drain pipes, including removal of rubbish outside MD land :-

M&L for providing cement concrete 1:3:6 type C-2 bed to 150mm bore of drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for :-

S&F salt glazed stone ware drain pipe 150mm bore in trenches and jointed as spfd

Cutting in to existing manholes for forming new drains and making good to pipe and making good to pipe and rendering ,cutting out existing benching in cement conc 1:2:4 type B1(in 1/2 or 3/4 round in section)and reforming benching as reqd for 150mm bore pipe.

Dismantling wall and ceiling boards (fibre,pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including fillets, complete all as specified and as directed.

S&F Anodised aluminium snap grid frame work (size of grid 605 X 605 mm) for false ceiling including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

M& l, 12 mm thick perforated particle board/tiles for insulation and acoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid and fixed in ceiling, flat or sloping. Complete all as sfd.

Dismantling unframed timber scantling under 40 sqcm in section, in fillets, rails, posts, rafters, purlins etc at any position, complete all as specified and as directed.

Dismantling framed timber scantling under 40 sqcm in section, in fillets, rails, posts, rafters, purlins etc at any position, complete all as specified and as directed.

Dismantling framed timber scantling OVER 40 sqcm in section, in fillets, rails, posts, rafters, purlins etc at any position, complete all as specified and as directed.

M&L for 9mm thick prelaminated particle board interior grade , prelaminated one side with decorated choice lamination and other side balancing white fixed with screws/nails to timber frame work as in wall pannelling,complete all as specified

M/L 9mm thk plywood, grade BWR, type BB, fixed with screws/nails to timber frame work

S&F 6mm thick Veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one face fixed with nails to timber frame work

M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions, including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement complete all as spfd and directed.Make and shade of tiles be all as approved by GE.

S & F Gypsum ceiling board 10mm thick in 600 x 600 mm pannel designer ceiling conforming to IS-14862 type B category three incl GI frame, grid work, Hold fast, suspended with GI wire complete.

M& L, 2nd class soft wood clean sawn as in battens for grid of wall lining and plain fillets. square, rectangular or triangular in section, , se-cured with nails or brads exc 13 sqcm and n .exc 25 sqcm in section complete all as sfd.

M& L, 2nd class soft wood clean sawn as in battens for grid of wall lining and plain fillets. square, rectangular or triangular in section, , se-cured with nails or brads exc 06 sqcm and n .exc 13 sqcm in section complete all as sfd.

M&L rendering 10mm thick cement mortar 1:4 as in vertical surfaces such as skirting , dados etc, complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge.

M&L for Point wiring with copper conductor cable multistrand, single core 1.5 sqmm size for one light point or bell point / Ex fan point controlled by one switch including one run of 1.5Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling including rectangular PVC/Wooden/MS box board heavy duty type for mounting switch / sockets etc complete all as specified and directed by Engr-in-charge.

All as per item No 101 here-in-before but 1.5 sqmm for one 3 pin 5 Amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on same board complete all as specified and directed by engineer in charge.

All as per item No 101 here-in-before but 1.5 sqmm for one 3 pin 5 Amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on independent board complete all as specified and directed by engineer in charge

M&L for point wiring for 3 pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 sqmm with 1.5 sqmm PVC copper conductor as earth wire connected to earth dolly and including PVC casing / caping fixed on wall including PVC Box 2mm thick complete all as specified and directed by engineer in charge.

M&L for Modular Switch 1 way 6A, 01 Module

M&L for Modular Switch 1 way 16A, 01 Module

M&L for Modular Socket 6A-2/3 Pin Combined 2 module

M&L for Modular Socket 6A/16A-2/3 Pin Combined 2 module

Supply and fix as in repair decorative Ultra Slim square Profile Linear LED Lighting Fixtures with extruded polycorbanate, enviromental friendly, energy efficient T-5 ready to use Pack of delite LED of Capacity 18W LED 6500K 4-feet long (White Colour) having driver, connector block etc complete with all accessories prewired and connecting electrically to celing rose using PVC insulated and overall sheathed flexible copper counductor cable of size 0.75Sqmm 3 core all as required at site or directed by Engineer in charge

Supply and fix as in repair decorative Ultra Slim square Profile Linear LED Lighting Fixtures with extruded polycorbanate, enviromental friendly, energy efficient T-5 ready to use Pack of delite LED of Capacity 5W LED 6500K (White Colour) having driver, connector block etc complete with all accessories prewired and connecting electrically to celing rose using PVC insulated and overall sheathed flexible copper counductor cable of size 0.75Sqmm 3 core all as required at site or directed by Engineer in charge

Supply and fix as in repair decorative Ultra Slim square Profile Linear LED Lighting Fixtures with extruded polycorbanate, enviromental friendly, energy efficient T-5 ready to use Pack of delite LED of Capacity 5W LED 6000K (White Colour) having driver, connector block etc complete with all accessories prewired and connecting electrically to celing rose using PVC insulated and overall sheathed flexible copper counductor cable of size 0.75Sqmm 3 core all as required at site or directed by Engineer in charge

Supply and fix Bldg Mounted LED Security Light Fitting 25 Watt, Having Pressure die cast housing with IP66 efficient, protection with heat resistant toughned glass with individual LED lenses Complete including making Connection with ceiling rose of light point PVC insulated and sheaqthed single core multi stranded copper conductor cable of size 1.5 Sqmm including suitable size of GI pipe, Gi bracket with nut and bolts fixing to the wall/pole complete all as specified and directed by engineer in charge

S&F in Lamp LED 10 Watt, 230 Volts 50 Hz AC complete all as specified and directed by engineer in charge.

S&F in Lamp LED 7 Watt, 230 Volts 50 Hz AC complete all as specified and directed by engineer in charge.

S&F switch piano flush type one way single pole 5 Amps 240 Volts complete all as specified and directed by engineer in charge.

S&F socket out let 3 Pin & 2 Pin flush type 5 Amps 240 Volts complete all as specified and directed by engineer in charge.

S&F switch socket combination 2 in 1, flush type out let 3 Pin 5 Amps 240 Volts complete all as specified and directed by engineer in charge.

S&F switch socket combination 2 in 1 5 pin out let universal flush type15 Amps 230 volts complete all as specified and directed by Engr-in-charge.

M&L for celing rose surface Bakelite 65X50mm Two to three terminals complete all as specified and directed by engineer in charge

M&L for Lamp Holder PVC/Polycarbonate Type with Back Plates suitable for Batten Fittings complete all as specified and directed by engineer in charge

M&L for modular white cover plate with frame, 8 module complete all as specified and directed by engineer in charge

M&L for modular white cover plate with frame, 6 module complete all as specified and directed by engineer in charge

M&L for modular white cover plate with frame, 4 module complete all as specified and directed by engineer in charge

M&L for modular white cover plate with frame, 3 module complete all as specified and directed by engineer in charge

M&L for modular Metal Flush Box, 8 module complete all as specified and directed by engineer in charge

M&L for modular Metal Flush Box, 6 module complete all as specified and directed by engineer in charge

M&L for modular Metal Flush Box, 4 module complete all as specified and directed by engineer in charge

M&L for modular Metal Flush Box, 3 module complete all as specified and directed by engineer in charge

Supply and fix in replacement of sheet metal enclosure TPN for DBs double door 240 Volts 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door with 200 Amps Bus Bar when MCB's to be used single pole & neutral 240 Volts 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door with 200 Amps Bus Bar when MCB's to be used single pole & neutral 240 Volts 4 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB TPN C- Curve 100 Amp 415 Volts 10 kA ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SPN C- Curve 63 Amp 240 Volts 10 kA ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SPN C- Curve 40 Amp 240 Volts 10 kA ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as directed.

M & L for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x2.5 sq. mm + 1x2.5 sq. mm earth wire complete all as specified

S&F of Sheet Metal Enclosure With Socket Plug Top and MCBs Single Pole and Earth Enclosure with a 3 Pin and Earth Plug and Socket Complete one MCB 20 Amp Single Phase complete all as spd and directed By engineer in charge

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work to the extend of Max 7.5 mtr connected to the plate by means of GI nuts, bolts, washer and further to test point by provn of Charcoal salt etc complete with all as per SSR part-I electrical Plate No-05 PCC chamber in PCC 1:3:6 type C-2 frame cover MS Funnel GI watering including Earth work for excavation and removal of Surplus soil complete all specified and directed by Engr-in-charge.

M&L 2nd class softwood clean sawn as in scantling fixed with nails.

M&L 250 mm long aluminium door sliding door bolt incl all necessary fittings & bolts.

M/S BALI CONSTRUCTIONS

R B TRADERS

M/S MUNEER HASSAN AKHON

Rampal Singh Contractor