Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.2 LAccepted-AOC 28 GREEN PARK PO BELGHARIA KOLKATA WEST BENGAL 700 056 | 24 PARAGANAS NORTH | WEST BENGAL | 700056 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹12.1 L+₹1.6 L (15.7%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹12.6 L+₹2.1 L (20.1%)Rejected-Finance AT PO CHANDIPUR BALASORE 756025 | BALASORE | BALASORE | ODISHA | 756025 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹13.2 L+₹2.7 L (26.1%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹13.7 L+₹3.2 L (30.2%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹10.1 L
EMD Value
₹21,000
Closing Date
21 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE I R and D Chandipur Post Chandipur PIN 756025
PROVN OF BATHROOM AND STAIRCASE AT KV BALASORE
2023_MES_584869_1
8808/CDP
Open Tender
Civil Works
Item Rate
180 days
Balasore
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandipur
₹21,000
Yes
31 Mar 2023
7 Mar 2023
23 Mar 2023
7 Mar 2023
21 Mar 2023
15 Mar 2023
Amount
NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' PART-I (B/R PORTION)
Demolition of brick work or stone/boulder masonry, built in cement mortar complete all as directed.
Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out
M & L for Boring holes 6 m deep 375 mm Dia in soil for under-reamed piles and add for each additional under-reamed and getting out and disposal of spoil to a distance of n exc.50 m
M&L for piles 375mm dia RCC M-30 Design mix as in bored pile 6 m length from cut off level all as specified and directed by Engr-in-Charge.
M & L for Boring holes 6 m deep 300 mm Dia in soil for under-reamed piles and add for each additional under-reamed and getting out and disposal of spoil to a distance of n exc.50 m
M&L for piles 300 mm dia RCC M-30 Design mix as in bored pile 6 m length from cut off level all as specified and directed by Engr-in-Charge.
M&L for Cement concrete PCC Type D-2 1:4:8(40 mm graded aggregate) in foundations,filling and mass concrete
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in old size bricks in cement mortar 1:6
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, As specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point As specified and directed.
M/L for rendering 15mm thick in cement mortar 1:4 with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified.
M&L preparation of newly plasered surface and applying walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
M/L for rendering 10mm thick in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement
M/L for rendering 5 mm thick in cement mortar 1:3 on internal ceiling / concrete surfaces, finished even and smooth without using extra cement
Preparation of new plastered surface of wall with chalk whiting and applying two coat of oil bound distemper over a coat of 3mm thick wall care putty complete all as specified and as directed.
Supply only liquid water proofing compound (Make : Pidilite Industries/Impermo / Snowcem India Ltd/ Sika
M & L for Reinforced cement concrete (design mix) M-25 ( 20 mm greded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, pile cap and mass concrete
M & L for Reinforced cement concrete (design mix) M-25 ( 20 mm greded aggregate) in Columns, pillars, piers, posts and struts.
M & L for Reinforced cement concrete (design mix) M-25 ( 20 mm greded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span
M & L for Reinforced cement concrete (design mix) M-25 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete, all as spd.
M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
All as per item 1.20 above but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, pile cap; and similar work; vertical or to batter
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc
Formwork to sides of Rough finished surfaces concrete pillars, posts, struts, piers, columns and stanchions
Formwork to soffits of Rough finished surfaces concrete suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide
Plinth protection 75 mm thick in PCC type C1 1:3:6 (using 20 mm graded aggregate crushed stone aggregate) laid in alternate bays (not exc 2 Sqm each) finishing even smooth at top without using extra cement and providing joints throughout the thickness of plinth protectio, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed at site.
M&L 75 mm thick Cement concrete type B- 2, 1:4:8 (40mm graded aggregate) as in sub base as specified and directed.
Hardcore of gauge exc 63mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface with brick stone boulders
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with ecessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
M & L for rendering to brick/ concrete surface 10mm thick in cement mortar 1:4 surfaces finished fair and even and scoured for fixing tiles/ stone slabs etc complete all as specified and as directed
M & L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes etc in cement mortar 1:6 complete all as sdpecified and as directed.
M&L for colour Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed bed 10 mm thivk in CM 1:4.
S&F 10mm dia TMT bar for rebaring to old building with new building including bonding agent (old & new concrete surfaces) all as directed by Engr-in-charge. (Length of bar and dismantling of old concrete as directed by EIC)
S&F 12 mm dia and above TMT bar for rebaring to old building with new building including bonding agent (old & new concrete surfaces) all as directed by Engr-in-charge. (Length of bar and dismantling of old concrete as directed by EIC)
M&L for (padding) rendering 20mm thick CM(1:4) with WPC on concrete surfaces complete all as specified.
S&F in APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
Cutting chases on B/Wall not exc 10cm width or girth for fixing of concealed water tubing wiring & making good with 1:3 cement mortar as per directed.
S&F powder coated (colour of coating as directed) aluminium (minimum 50 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant,door spring,handles etc all as specified and as directed.
S&F powder coated (colour of coating as directed) Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified
S&F powder coated (colour of coating as directed) Anodised aluminium window and ventilator shutters, sliding type aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified
Supply & fixing 5.50 mm thk tinted sheet of glass n.exc 0.5 sqm in each pane fixed
M&L for 9 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw as in palmet boxes and wall.
M & L for coloured non-skid ceramic tiles 300x300x7 mm thick in flooring set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles including 15 mm thick cement mortar screed bed or bedding layer in CM 1:6 complete all as specified and directed by Engr-in-charge.
S&F Rotational moulded water tank 500 liter polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as spd and directed by engr in charge.
S&F15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixe as spd and directed.
S&F 15 mm dia bib tap chromium plated with cruth butterfly handle, screw down , screwed for iron pipe or brass ferrule.
S&F 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or fixed to wall complete as spd and directed.
S&F 75 mm dia PVC (SWR) bends any radius complete as spd and directed.
S&F 75 mm dia PVC floor trap , plain with grating including jointing with solvent. as spd and directed.
S & F health faucet with 1 meter tube & hook (Braded Tube) CAT No BEA - 40S) Make : Prayag
S & F 110 MM PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors
M&L Concrete bed 1:4:8 type D-2 to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested bore of pipe in 110 mm.
S & F 110 x 75 mm PVC (SWR) reducer
S & F 110 mm PVC (SWR) junction single (Single T) equal or unequal with access Door
S & F 110 mm PVC (SWR) bends
S & F 75mm PVC (SWR) vent cowl
S & F PVC (SWR) Gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified & directed.
Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.
Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.
S & F Vitreous china wash hand basin with pedestal, coloured, flat back of size 550 x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, fixed in repairs, all as specified.
S&F Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, as spd and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm as spd and directed.
PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete.
S&F Vitreous China Urinal, full stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.
S&F 32 mm bore waste pipeLow density polyet-hylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,or in floors, as spd and directed.
S&F Vitreous China wash down water closet pan (EWC) white and trap, including connection to drain (or outgoing pipe) and to flushing pipe
S&F plastic water closet seat, white, closed pattern with flat bottom and cover for pedestal pan
Tubular Towel rail 600mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.
S&F 10mm dia TMT bar for rebaring to old building with new building including bonding agent (old & new concrete surfaces) all as directed by Engr-in-charge. (Length of bar and dismantling of old concrete as directed by EIC)
S&F 12 mm dia TMT bar for rebaring to old building with new building including bonding agent (old & new concrete surfaces) all as directed by Engr-in-charge. (Length of bar and dismantling of old concrete as directed by EIC)
Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 150 of MES SSR 2010 Part - II and as directed by the Engr-in-Charge
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on page No 146 of MES SSR 2010 Part - II
S & F M S cold rolled butt hinges medium weight 100 mm long (ISI marked)
S & F Aluminium anodised, barrel tower bolts of extruded section with 150 mm long bolt and fixed all as specified
S & F Aluminium handles, cast type, anodised 125 mm size complete all as specified
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished and re-forming benching as required complete all as specified and as directed.
SCHEDULE 'A' PART-II (E/M PORTION)
M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.
M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light point controlled by one 5/6 amps, two way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.
Supply and fixing including connection of switch piano flush button type single pole one way 5 Amps.
M&L switch piano flush type single pole two way 5 Amp including connections.
M&L ceiling rose PVC poly carbonate,isolated body with three terminals including connection.
S&F 20W (1X4') wall/roof mounted LED batten, extruded aluminium housing provided for efficient heat dissipation, with necessary wiring, including all required accessories for light fitting with fixing arrangement.
Supply, install & testing exhaust fan Metal Body 300 mm sweep heavy duty 1370 RPM complete fixed to wall with suitable size bolts, grouted to wall and connecting up including provision of cable from connector to fan with three core flexible cable of size 24/0.2mm with copper conductor from ceiling rose to exhaust fan.
M/S DK MUKHERJEE CO
DS ENTERPRISES
Rekha Enterprises
Bansal And Co
RANA ENTERPRISES
Rounaq Enterprise
CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION
Bidder Name
RANA ENTERPRISES
DS ENTERPRISES
Bansal And Co
Rounaq Enterprise
J B NATH AND SON
Rekha Enterprises
CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION
M/S DK MUKHERJEE CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .