Kole and Chafesar Rural Water Supply Scheme Tal-Maval Dist Pune Under JJM Open Class 3173839

SUB-ESTIMATE NO : 01 5 HP Submersible Pumping Machinery Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. 5 HP 2NO, Q-0.99 LPS, H-52 M

Glandless Sluice Valve :- Providing & erecting 50 mm P.N. 1.0 C.I D.F sluice valve con to I.S, 14846-2000 with all necessary jointing material as per detailed specifications

Designing, Providing, Erecting, Testing & Commissioning 50 MM dia ,Cast Steel,D.F. Reflux valve of Class 150 rating generally conforming to IS- 5312, Part I with renewable gun metal sealing face on swing door without bypass arrangement as per detailed specifications enclosed.

20 mmAir Valve Single Ball Flanged / Screwed Type - PN -1

Providing erecting 50 MM 'B' class G.I. Pipe for suction & delivery

Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications.

Providing making flanged joints to the MSDF pipes & specials as per detailed specifications

Designing , Providing ,erecting commissioning with test & trial of Pressure gauge of 100 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe

5 LT Panel Board : Providing erecting L.T. Panel board as per detailed specifications ( As per rate analysis )

4C x 10 sq.mm Aluminium conductor, XLPE / PVC insulated & armoured cable Jackwell to WTP LT Panel

3C x 2.5 sq.mm Copper Submersible cable from starter to 10Hp Pump

Supplying & laying (including excavation) 50 cm outside dia. Double wall corrugated pipes (DWC) - for underground cable H/W to WTP

For Arrangement Of floating Pump Including all Material Required For Arrangement

Providing Erecting MS Structural steel work, ISMB for Pumpset Foundation

Providing & making plate type earthing of 60 x 60 x 0.6 mm G.I. earth plate with chember as per IE rules & as per detailed specification.

GI Earthing strip/ Wires

Tools

Electrification

SUB-ESTIMATE NO :02 5 HP Submersible Pumping Machinery Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. 5 HP 2NO, Q-1.11 LPS, H-29 M

Glandless Sluice Valve :- Providing & erecting 50 mm P.N. 1.0 C.I D.F sluice valve con to I.S, 14846-2000 with all necessary jointing material as per detailed specifications

Designing, Providing, Erecting, Testing & Commissioning 50 MM dia ,Cast Steel,D.F. Reflux valve of Class 150 rating generally conforming to IS- 5312, Part I with renewable gun metal sealing face on swing door without bypass arrangement as per detailed specifications enclosed.

20 mmAir Valve Single Ball Flanged / Screwed Type - PN -1

Providing erecting 50 MM 'B' class G.I. Pipe for suction & delivery

Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications.

Providing making flanged joints to the MSDF pipes & specials as per detailed specifications

Designing , Providing ,erecting commissioning with test & trial of Pressure gauge of 100 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe

5 LT Panel Board : Providing erecting L.T. Panel board as per detailed specifications ( As per rate analysis )

4C x 10 sq.mm Aluminium conductor, XLPE / PVC insulated & armoured cable Jackwell to WTP LT Panel

3C x 2.5 sq.mm Copper Submersible cable from starter to 10Hp Pump

Supplying & laying (including excavation) 50 cm outside dia. Double wall corrugated pipes (DWC) - for underground cable H/W to WTP

For Arrangement Of floating Pump Including all Material Required For Arrangement

Providing Erecting MS Structural steel work, ISMB for Pumpset Foundation

Providing & making plate type earthing of 60 x 60 x 0.6 mm G.I. earth plate with chember as per IE rules & as per detailed specification.

GI Earthing strip/ Wires

Tools

Electrification

SUB-ESTIMATE NO: 03 PURE WATER RAISING MAIN Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler / specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 90 MM HDPE 6 KG/CM^2 DAM TO PROPOSED ESR KOLE

Providing at site of work PVC / G.I. Pipes as mentioned below as per relevant IS specifications including all taxes, freight charges, octori, loading, unloading, transportation upto the site of work, paying Third Party ( approved by MJP ) inspection charges, guarding pipes till hydraulic test is given and line is commisioned etc. complete. 80 mm. GI MEDIUM

Providing & Supply of HDPE Special, Fittings shall be inclusive of all cost such as testing, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transportation up to site, transit insurance loading, unloading, stacking etc. complete.

Providing double flange sluice valve confirming for IS14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 50 mm dia for washout

Providing and supplying at site ductile iron / Spheroi- dal Graphite (S.G.) iron single / Double chamber tamper proof air valve without isolating sluice valve. Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) 20 MM

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259)

Filling in plinth and floors murum bedding in trenches with approved murumb from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete.

Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. 90 mm HDPE 6 KG/CM^2

Lowering, Laying and Jointing GI. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 80 mm. GI MEDIUM

Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 90 mm HDPE 6 KG/CM^2

90 mm HDPE 6 KG/CM^2

Hydraulic testing of GI pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 80 mm. GI MEDIUM

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). 20 MM

Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.) upto 150mm

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) M-150

Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 50 mm dia for washout

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete.

SUB-ESTIMATE NO : 04 RCC ESR 0.14 LAKH LITER CAPACITY, 6 M STAGGING AT KOLE Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge.

Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon,loading into truck transport to stores, unloadingetc. complete as directed by Engineer-in-charge. (a) Inlet pipe 80 mm dia D.I. D/F pipes

(b) Outlet pipe 80 mm dia D.I. D/F pipes

(c) Overflow pipe 80 mm dia D.I. D/F pipes

Providing and supplying ISI standard CI flanged/ S& S specials including all statutory duties &taxes such as GST levied by GOI & GOM in allrespect, railway freight, insurance, unloadingfrom railway wagon, loading into truck transportto departmental store /site, unloadingstackingetc. complete.

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Providing double flange sluice valve confirming for IS- 14846 including worn geaarrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. (b) For Outlet 80 mm dia

(c) For Washout 80 mm dia

(d) For bypass arranement 80 mm dia

SUB-ESTIMATE NO : 05 RCC ESR 0.15 LAKH LITER CAPACITY, 6 M STAGGING AT CHAFESAR Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti-termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge.

Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon,loading into truck transport to stores, unloadingetc. complete as directed by Engineer-in-charge. (a) Inlet pipe 80 mm dia D.I. D/F pipes

(b) Outlet pipe 80 mm dia D.I. D/F pipes

(e) Overflow pipe 80 mm dia D.I. D/F pipes

Providing and supplying ISI standard CI flanged/ S& S specials including all statutory duties &taxes such as GST levied by GOI & GOM in allrespect, railway freight, insurance, unloadingfrom railway wagon, loading into truck transportto departmental store /site, unloadingstackingetc. complete.

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Providing double flange sluice valve confirming for IS- 14846 including worn geaarrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. (b) For Outlet 80 mm dia

(c) For Washout 80 mm dia

(d) For bypass arranement 80 mm dia

SUB-ESTIMATE NO : 06 DISTRIBUTION SYSTEM Providing at site of work PVC / G.I. Pipes as mentioned below as per relevant IS specifications including all taxes, freight charges, octori, loading, unloading, transportation upto the site of work, paying Third Party ( approved by MJP ) inspection charges, guarding pipes till hydraulic test is given and line is commisioned etc. complete. 50 mm dia

65 mm dia

Providing & Supply of HDPE Special, Fittings shall be inclusive of all cost such as testing, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transportation up to site, transit insurance loading, unloading, stacking etc. complete.

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle caps taxes transportation levied by GOI & GOM in all respect etc.complete Without by pass arrangement - PN -1 50 mm dia

65 mm dia

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.

Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc.complete. (Bd-A-5/259)

Filling in plinth and floors murum bedding in trenches with approved murumb from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete.

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 63 MM HDPE 6 Kg/Sq.cm

75 MM HDPE 6 Kg/Sq.cm

LLowering, Laying and Jointing GI/CI pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 50 mm dia

65 mm dia

Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 63 MM HDPE 6 Kg/Sq.cm

75 MM HDPE 6 Kg/Sq.cm

Hydraulic testing of GI pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 50 mm dia

65 mm dia

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) PCC - M-150

Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete. 50 mm dia

65 mm dia

Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 225 mm x 300 mm (40 kg)

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:2:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion12mm thick cement plaster in CM 1:4 proportion on both sides, CC 1:2:4 15cm thick for coping and providing and fixing SFRC manhole frame and cover, etc. complete as directed by Engineer-in-charge.

Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-incharge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.) 80 mm

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete.

SUB-ESTIMATE NO :07 TRIAL RUN AND MAINTENANCE OF SCHEME Commissioning, running and maintaing the scheme to its rated capacity, including providing necessary personnel such as operator, valveman,labour etc as per requirement of the scheme for a period of 1 Month together with training to the Local Body maintenance staff and handing over the scheme to local Body after completion of the above period as directed by Engineer-in-charge.